All Projects

Description:
GPG does not receive keys from servers. Seems that connection is blocked.

Additional info:
* package version(s)

$ gpg --version 
gpg (GnuPG) 2.2.8
libgcrypt 1.7.6
(...)

* config and/or log files etc.

$ gpg --debug-all --receive-keys B00033B86FDA59BA7D75B89BB88AF90BF64827C5
gpg: reading options from '/home/asm/.gnupg/gpg.conf'
gpg: enabled debug flags: packet mpi crypto filter iobuf memory cache memstat trust hashing ipc clock lookup extprog
gpg: DBG: [not enabled in the source] start
gpg: DBG: chan_3 <- # Home: /home/asm/.gnupg
gpg: DBG: chan_3 <- # Config: /home/asm/.gnupg/dirmngr.conf
gpg: DBG: chan_3 <- OK Dirmngr 2.2.8 at your service
gpg: DBG: connection to the dirmngr established
gpg: DBG: chan_3 -> GETINFO version
gpg: DBG: chan_3 <- D 2.2.8
gpg: DBG: chan_3 <- OK
gpg: DBG: chan_3 -> KS_GET -- 0xB00033B86FDA59BA7D75B89BB88AF90BF64827C5
gpg: DBG: chan_3 <- ERR 219 Server indicated a failure <Fonte não especificada>
gpg: keyserver receive failed: Server indicated a failure
gpg: DBG: chan_3 -> BYE
gpg: DBG: [not enabled in the source] stop
gpg: keydb: handles=0 locks=0 parse=0 get=0
gpg:        build=0 update=0 insert=0 delete=0
gpg:        reset=0 found=0 not=0 cache=0 not=0
gpg: kid_not_found_cache: count=0 peak=0 flushes=0
gpg: sig_cache: total=0 cached=0 good=0 bad=0
gpg: random usage: poolsize=600 mixed=0 polls=0/0 added=0/0
              outmix=0 getlvl1=0/0 getlvl2=0/0
gpg: secmem usage: 0/32768 bytes in 0 blocks

* Useful information:
https://arcolinux.com/fix-for-key-could-not-be-looked-up-remotely/

Unfortunately, the workaround does not work for me. However, it indicate the arch linux package that fixes this issue.

Steps to reproduce:
Just type.

gpg --receive-keys B00033B86FDA59BA7D75B89BB88AF90BF64827C5

Steps to reproduce:
Open from the command line any pdf file with either `zathura-pdf-poppler` or `zathura-pdf-mupdf`, then hit `q` to quit and the terminal will show the following error:

** (zathura:<PID>): CRITICAL **: girara_list_foreach: assertion 'list && list->start && callback' failed

Description:

kobodl
Application path: ‘.’ [41] Could not get double buffered display.
[41] Shadow buffer requested; relying on SDL’s shadow buffer.
[279] audio.c: Warning: Requested 1024 samplebuffer, but got 512 samples.
[1148] Loading “Trance1”...
[1148] Copyright (C) David Olofson, 2002.
[1240] Done!
[1240] Loading “Test2”...
[1240] Copyright (C) David Olofson, 2002.
[1240] Done!
[1241] Waveform info:
[1241] ( 0: MIDI <Unknown>, 120 PPQN, 1 events)
[1241] 1: MONO16 ONESHOT, 32000 Hz, 64000 bytes (1.00 s)
[1241] 2: MONO16 ONESHOT, 24000 Hz, 144000 bytes (3.00 s)
[1241] 3: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 4: MONO16 ONESHOT, 16000 Hz, 12800 bytes (0.40 s)
[1241] 5: MONO16 ONESHOT, 16000 Hz, 22400 bytes (0.70 s)
[1241] 6: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 7: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 8: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 9: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 10: MONO16 ONESHOT, 24000 Hz, 192000 bytes (4.00 s)
[1241] 11: MONO16 ONESHOT, 32000 Hz, 48000 bytes (0.75 s)
[1241] 12: MONO16 ONESHOT, 32000 Hz, 48000 bytes (0.75 s)
[1241] 13: MONO16 ONESHOT, 32000 Hz, 48000 bytes (0.75 s)
[1241] 14: MONO16 ONESHOT, 24000 Hz, 48000 bytes (1.00 s)
[1241] 16: MONO16 ONESHOT, 33488 Hz, 66976 bytes (1.00 s)
[1241] 30: MONO16 ONESHOT, 33488 Hz, 66976 bytes (1.00 s)
[1241] 32: MONO16 LOOPED, 33488 Hz, 256 bytes (0.00 s)
[1241] 50: MONO16 ONESHOT, 32000 Hz, 64000 bytes (1.00 s)
[1241] 55: MONO16 ONESHOT, 32000 Hz, 64000 bytes (1.00 s)
[1241] 58: MONO16 ONESHOT, 8000 Hz, 16000 bytes (1.00 s)
[1241] 60: MONO16 ONESHOT, 32000 Hz, 16000 bytes (0.25 s)
[1241] 63: MONO16 ONESHOT, 32000 Hz, 32000 bytes (0.50 s)
[1241] 74: MONO16 LOOPED, 33488 Hz, 66976 bytes (1.00 s)
[1241] 84: MONO16 ONESHOT, 32000 Hz, 256000 bytes (4.00 s)
[1241] 86: MONO16 ONESHOT, 32000 Hz, 256000 bytes (4.00 s)
[1241] 87: MONO16 ONESHOT, 16000 Hz, 96000 bytes (3.00 s)
[1241] 102: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 103: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 104: MONO16 ONESHOT, 16000 Hz, 1600 bytes (0.05 s)
[1241] 105: MONO16 ONESHOT, 16000 Hz, 1600 bytes (0.05 s)
[1241] 106: MONO16 ONESHOT, 16000 Hz, 1600 bytes (0.05 s)
[1241] 107: MONO16 ONESHOT, 16000 Hz, 16000 bytes (0.50 s)
[1241] 108: MONO16 ONESHOT, 32000 Hz, 32000 bytes (0.50 s)
[1241] 109: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 110: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 111: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 112: MONO16 ONESHOT, 32000 Hz, 1600 bytes (0.03 s)
[1241] 113: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 114: MONO16 ONESHOT, 32000 Hz, 32000 bytes (0.50 s)
[1241] 115: MONO16 ONESHOT, 32000 Hz, 3200 bytes (0.05 s)
[1241] 116: MONO16 ONESHOT, 32000 Hz, 12800 bytes (0.20 s)
[1241] 117: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 118: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 119: MONO16 ONESHOT, 16000 Hz, 25600 bytes (0.80 s)
[1241] 120: MONO16 ONESHOT, 16000 Hz, 11000 bytes (0.34 s)
[1241] 121: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] (122: MIDI <Unknown>, 120 PPQN, 1 events)
[1241] 123: MONO16 ONESHOT, 48000 Hz, 48000 bytes (0.50 s)
[1241] 124: MONO16 ONESHOT, 48000 Hz, 96000 bytes (1.00 s)
[1242] 125: MONO16 ONESHOT, 32000 Hz, 64000 bytes (1.00 s)
[1242] 126: MONO16 ONESHOT, 32000 Hz, 96000 bytes (1.50 s)
[1242] 127: MONO16 ONESHOT, 32000 Hz, 32000 bytes (0.50 s)
[1242] Total 51 waveforms, total size: 2372184 bytes, total time: 36 s
[1881] No hiscore entries found!
Segmentation fault
[~]

I could not find any regarding using arch or other branded themes. Parabola apparently rebrands some stuff in their libre repository, eg. they have their own parabola-themes-slim package for slim based themes.

https://issues.hyperbola.info/index.php?do=details&task_id=1213&opened=24&status[0]=

Upon installation of recoll, I can see:

optional dependency: untex: for dvi support with dvips

but untex cannot be installed

A Material-like flat theme for GTK+ 2/3, and GNOME shell, released under a GNU General Public Licence (GNU GPL) 2 and later.

• Arch package URL: https://www.archlinux.org/packages/community/any/materia-gtk-theme
• Source code URL: https://github.com/nana-4/materia-theme

purple-plugin-pack provides access to Napster which is only useful with a single company and sever (as far as I could tell).

Description: Newsboat is an ncursers RSS/Atom feedreader. RSS and Atom are a number of widely-used XML formats to transmit, publish and syndicate articles, for example news or blog articles. Newsboat is designed to be used on text terminals on Unix or Unix-like systems such as GNU/Linux, FreeBSD or macOS.

Newsboat is a fork of Newsbeuter. The only difference is that Newsboat is actively maintained while Newsbeuter isn’t.

Additional info: Official Website: https://newsboat.org/

License(s): custom: MIT

Version: newsboat 2.13-1
https://www.archlinux.org/packages/community/x86_64/newsboat/

Reason of Request Less bloat than Liferea and easy to maintenance. Sites news are more ethical and decentralized than read the “news” on centralized Social Networks (Bubbles).
https://en.wikipedia.org/wiki/Social_media_bubble

Could it be possible to add :

mkv-extractor-qt

“Graphical MKV demultiplexer”

https://aur.archlinux.org/packages/mkv-extractor-qt/

License: GPL3

Thanks

Could it be possible to add :

vidcutter

“A modern, simple to use, constantly evolving and hella fast MEDIA CUTTER + JOINER w/ frame-accurate SmartCut technology + Qt5, libmpv, FFmpeg and MediaInfo powering the backend.”

License : GPL3

https://aur.archlinux.org/packages/vidcutter/

https://vidcutter.ozmartians.com/

5.4 version desired, it would be nice to still see the ciphers in Iceape.

I would like this to be available for Iceape as well V4.13

this would be appreciated greatly, although I am in no hurry.

Description:
Screen locking does not work in GNOME, either with keyboard shortcuts or from the menu, while using LightDM.

Additional info:
* According to this thread[1] this bug has been patched in Ubuntu. Please consider applying this patch.[2]

Steps to reproduce:
# pacman -S gnome lightdm lightdm-gtk-greeter
# rc-update add lightdm default
Reboot, log in to a GNOME session and attempt to lock screen.

[1] https://www.reddit.com/r/gnome/comments/9klvej/is_there_a_way_to_get_the_screen_to_lock_with/ [2] https://git.launchpad.net/~ubuntu-desktop/ubuntu/+source/gnome-shell/tree/debian/patches/ubuntu/lightdm-user-switching.patch

Description:

$ marble-qt –latlone=0.5,6.5
Ignoring to load the following file since it doesn’t look like a valid Marble plugin: “/usr/lib/marble/plugins/libWlocatePositionProviderPlugin.so” Reason: “Cannot load library /usr/lib/marble/plugins/libWlocatePositionProviderPlugin.so: (libwlocate.so: cannot open shared object file: No such file or directory)”

When package libwlocate is installed, it is not showing this error.

Shall that package be dependency?

Request for :

qarte

“Allow you to browse into the archive of arte+7 & arteLiveWeb sites and to record your prefered videos.”

https://aur.archlinux.org/packages/qarte

License : GPL3

A Desktop Enivronment mostly focused on BSD, but also one that is very lightweight and easily customized. Would love to see this desktop on Hyperbola and later whenever Emulatorman makes it, Hyperbola/GNU/HyperBK

https://github.com/lumina-desktop/lumina/releases

Version is the latest one in above link of stable.

https://github.com/rodlie/powerkit/releases

Version 1.0 requested

When you add Lumina desktop, add this package for sure. Although it is compatible with other desktops too. So it would be good to add it regardless.

Description:
I believe the arm-unknown-linux-gnueabi-gcc package to be broken as described here.

Additional info:
* package version(s) - arm-unknown-linux-gnueabi-gcc - all versions

Steps to reproduce:
I don’t think “steps to reproduce” to be relevant in this case. My forum topic linked above already contains all the necessary info on the subject :) However, one could try compiling glibc and busybox as described here. Yes, these are instructions for debian-like systems. They have to be adapted accordingly

Please add xfce4-alsa-plugin (to get rid of pulseaudio plugin on xfce)

License: GPL3

https://aur.archlinux.org/packages/xfce4-alsa-plugin/ https://github.com/equeim/xfce4-alsa-plugin

my recommended fix, make it reflect the applications that are actually installed on the system after removing non-free software support.

A format is not known or recognized in the original code base. To add a string into at the audio section in xferc.in:

opus = "<audioplayer>,<audioplayer>,audacity;Opus Audio;mp3_32x32.png;mp3_16x16.png;;"

Description:

default configuration is /etc/auto.master instead of /etc/autofs/auto.master

admin→ sudo /usr/bin/automount -v -f -p /run/autofs.pid
Starting automounter version 5.1.2, master map /etc/auto.master
using kernel protocol version 5.02
lookup(file): file map /etc/auto.master missing or not readable
no mounts in table

The IDE codelite is an excellent development environment, continuously updated, has a clear vision and active support.
Would be nice to have this one within the repositories in upcoming releases, perhaps 0.5?

Description: As Gnome has decided against following libre, free principles the desktop-environment has becoming a risk for the privacy and freedom for users. Meaning that the desktop-environment with all basic packages should be removed. Of course the final decision is up to the community and the development-team. Followed up are more reasons for the insights:

* Bloated with questionable dependencies (including mandatory systemd)
* Using proprietary services as high risk for freedom and privacy for users (https://i.stack.imgur.com/yZcyV.png)
* Coming up with questionable and vague principles, against software-freedom in a whole (inclusion of flatpak and flathub as so-called standardization for distributions, discussions about proprietary software included within the software-center)

Additional info for packages:

gnome-backgrounds
gnome-calculator
gnome-contacts
gnome-control-center
gnome-dictionary
gnome-disk-utility
gnome-font-viewer
gnome-keyring
gnome-screenshot
gnome-session
gnome-settings-daemon
gnome-shell
gnome-shell-extensions
gnome-system-monitor
gnome-terminal
gnome-themes-standard
gnome-user-docs
gnome-user-share
grilo-plugins

When i try to set the brightness on my screen, with xbacklight -set 100,

it does this:

No outputs have backlight property

and it doesn’t really matter if I set it lower than 100 or what it currently is at.

Fix when you can please!

The current version of the package icewm within the Hyperbola-repositories is 1.3.8. The latest version is 1.6.3!
An update would be helpful as this window-manager follows absolutely the principles of the distribution Hyperbola itself, being simple and fast.

It appears when I plug in my libreboot laptop x200 in, it appears to dim the screen and when its unplugged, the screen is bright again. Something peculiar is at work, I wondered if this could be fixed.

My assumption is it is related to lxdm or lightdm. Any thoughts?

I am currently using 0.4, so I don’t expect this to be a fast process, just when you get a chance okay?

When trying to start a new campaign the complete game-engine is crashing with the following message:

Object::disconnect: Unexpected null parameter
QCoreApplication::postEvent: Unexpected null receiver

As ghc and fpc should be removed in the near future it would be good to validate this or otherwise remove the game-package itself also.

When using the package for wireless connections no further icon is displayed without having the package [b]network-manager-applet[/b] installed.

CHDKPTP is part of CHDK project - a free software firmware add-on for Canon cameras. It enables controlling Canon cameras via the computer.

Attached is a modified iup PKGBUILD (Lua 5.3 build was removed as it failed to compile) and configuration files for chdkptp.

Code is available via svn:

$ svn co http://subversion.assembla.com/svn/chdkptp/trunk chdkptp

Copy chdkptp.sh and config.mk files to source tree then compile via make. Requires root privileges to connect to a camera.

After confirming the newly created account (typing the confirmation code, the passwoard and its confirmation, and clicking the button to continue), the following error appears:

  Notice: crypt(): No salt parameter was specified. You must use a randomly generated salt and a strong hash function to produce a secure hash. in /srv/http/flyspray/includes/class.flyspray.php on line 656 

The account login seems to work normaly.

php-imagick is an optdepends for many PHP webapps like Nextcloud and Wordpress, would be good to have itin Hyperbola, Arch added it last year

Description:
Was wondering if there is any issue in terms of freedom andor privacy for the inclusion of elogind? Feedback will be apreciated Cheers.

this was recently implemented in gentoo.

source:
https://libregit.org/i3_relativism/elogind

references:
https://blogs.gentoo.org/leio/2019/03/26/gnome-3-30/#comment-9555 https://forums.gentoo.org/viewtopic-t-1094796.html

contact gentoo developer for help in implementation:
https://wiki.gentoo.org/wiki/User:Leio/TODO

The RFC 3461 would allow Hyperbola email accounts to request the destination email providers to point out if an email was successfully delivered.

It might not cover all transport failures, but at least has a chance to know in advance whether the message was delivered, discarding the events that happen afterwards (be it to the main inbox or subject to filtering rules such as moving to other folder, marking as spam or deleted after receipt).

here i will report 2 issues and one change to make
issues:
1- there is a failed smtp error with post and reply
2- in the forum profile one cant add website with .xyz domain name

the change:
1- with pgp key one would add a short key link just like what was mentioned in here:
https://forums.hyperbola.info/viewtopic.php?pid=2639#p2639

Iosevka wins a poll about most beautiful fonts on reddit (/r/linux). This font is very similar than Droid Sans (Official Google Font) with many advantages:

1 - Has 5 types modes (lightest, light, normal, bold, super bold)
2 - Condensed and big sizes (perfect for visual impairments users)
3 - Very Legible on i3-wm, Sway, Conky bar
4 - OTF license (Freedom license)

Iosevka is already on AUR, but create a official package prevent bug or proprietary third parties apps (Yaourt, etc) be installed by beginners Hyperbola users.

Official Site:
https://github.com/be5invis/Iosevka

On AUR:
https://aur.archlinux.org/packages/ttf-iosevka

Description:
The /usr/sbin directory in spamassassin has permissions 755
https://git.hyperbola.info:50100/packages/extra.git/tree/spamassassin/PKGBUILD#n88

And ‘filesystem’ sets it to 750
https://git.hyperbola.info:50100/packages/core.git/tree/filesystem/PKGBUILD#n135

So when installing spamassassin, pacman throws a warning

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

Additional info:
* spamassassin 3.4.2-1.hyperbola2

Description:
The /usr/sbin directory in postfix has permissions 755
https://git.hyperbola.info:50100/packages/extra.git/tree/postfix/PKGBUILD#n115

And ‘filesystem’ sets it to 750
https://git.hyperbola.info:50100/packages/core.git/tree/filesystem/PKGBUILD#n135

So when installing postfix, pacman throws a warning

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

Additional info:
* postfix-3.2.2-1.hyperbola6

Description:

Gajim XMPP Client wont start after installing python2-gnupg.

Additional info:
* package version(s)

  community/python2-gnupg 0.4.0-2
  extra/gajim 0.16.8-1.hyperbola2

* config and/or log files etc.

/usr/lib/python2.7/site-packages/gajim/common/gajim.py

Steps to reproduce:

With Gajim working is not possible to assign an OpenPGP key because it needs a wrapper. Therefore python2-gnupgp package is needed. But after installing python2-gnupgp, Gajim doesn’t start. The following output is displayed from the console:

07/21/2018 18:00:41 (E) gajim.c.gnupg Unable to run gpg - it may not be available.
Traceback (most recent call last):

File "/usr/lib/python2.7/site-packages/gnupg.py", line 757, in __init__
  p = self._open_subprocess(["--version"])
File "/usr/lib/python2.7/site-packages/gnupg.py", line 832, in _open_subprocess
  startupinfo=si)
File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
  errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
  raise child_exception

OSError: [Errno 2] No such file or directory
Traceback (most recent call last):

File "gajim.py", line 513, in <module>
  interface.run()
File "/usr/lib/python2.7/site-packages/gajim/gui_interface.py", line 2704, in run
  self.roster = roster_window.RosterWindow()
File "/usr/lib/python2.7/site-packages/gajim/roster_window.py", line 6611, in __init__
  connection_zeroconf.ConnectionZeroconf(gajim.ZEROCONF_ACC_NAME)
File "/usr/lib/python2.7/site-packages/gajim/common/zeroconf/connection_zeroconf.py", line 68, in __init__
  CommonConnection.__init__(self, name)
File "/usr/lib/python2.7/site-packages/gajim/common/connection.py", line 150, in __init__
  self.gpg = gpg.GnuPG()
File "/usr/lib/python2.7/site-packages/gajim/common/gpg.py", line 37, in __init__
  gnupg.GPG.__init__(self, gpgbinary=gajim.GPG_BINARY, use_agent=use_agent)
File "/usr/lib/python2.7/site-packages/gnupg.py", line 761, in __init__
  raise OSError(msg)

OSError: Unable to run gpg - it may not be available.

After doing some search, the issue is that gajim.py is trying to call ‘gpg’ as ‘gpg1’.

# grep -n GPG_BINARY /usr/lib/python2.7/site-packages/gajim/common/gajim.py
162:GPG_BINARY = ‘gpg1’

By replacing ‘gpg’ instead of ‘gpg1’, Gajim will start normally with OpenPGP feature available.

Maybe a newer revision of python2-gnupg is required or maybe a small patch in the current package.

This already works for it, but I just thought I would request it to be put in.

this package is under gpl3. It is the most reasonable chess game because it can be easy or hard depending on your preference.

Name: FireGestures
Version: 1.11.1 (compatible Firefox version 52)
Source code: Github
Description: A customizable mouse gestures extension which enables to execute various commands and user scripts with six types of gestures.

https://github.com/gomita/firegestures/

https://addons.mozilla.org/en-US/firefox/addon/firegestures/

Description:
The /etc/fail2ban/filter.d/dovecot.conf file has a failregex with the following:

^%(__prefix_line)s(?:auth|auth-worker\(\d+\)): (?:pam|passwd-file)\(\S+,<HOST>\): unknown user\s*$

and works with things like:

Month day time hostname dovecot: auth: passwd-file(user@domain.com,IP): unknown user

but with verbosity enabled in Dovecot, this output looks like this:

Month day time hostname dovecot: auth: passwd-file(user@domain.com,IP): unknown user (given password: password)

and in this case it doesn’t work, but it does if we fix the failregex if we replace it with:

^%(__prefix_line)s(?:auth|auth-worker\(\d+\)): (?:pam|passwd-file)\(\S+,<HOST>\): unknown user( \(given password: \S*\))?\s*$

with this new expression, it works with and without verbosity

And regarding postfix, to make it work correctly I “backported” some pieces from newest failregex:

/etc/fail2ban/postfixr-rbl.conf:

^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[<HOST>\]: [45]54 [45]\.7\.1 Service unavailable; Client host \[\S+\] blocked using .* from=<\S*> to=<\S+> proto=ESMTP helo=<\S*>$

/etc/fail2ban/postfix.conf: (second failregex)

^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[<HOST>\]: 45[04] 4\.7\.1 Client host rejected: cannot find your (reverse )?hostname, (\[\S*\]); from=<\S*> to=<\S+> proto=ESMTP helo=<\S*>$

I can create a patch if you want. Note that I haven’t tested all filters, some others may also need some rework

Additional info:
* fail2ban-0.9.6-2.hyperbola3