All Projects

Description: Per a user request and to better secure the kernel, we can embed the cryptsetup and ciphers in the kernel. This would mean rather than exposed modules, they are built-in to the kernel and ready to use even without an intramfs.

To be embedded: ciphers aes, twofish, serpent; sha256, sha512 - and the necessary modules (don’t forget the block modes xts, lvm and cryptsetup ...)

Additionally, we could include USB Guard and any other features that meet our social contract and security outlook.

Description:
notmuch-mutt fails to compile without perl-mail-message which is missing in Hyperbola

Steps to reproduce:
Install notmuch-mutt and try `notmuch-mutt` at the command line. Then install `perl-mail-message` from Arch and try again.

The Arch version of “supervisor” from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the a global ruleset for INIT-freedom, systemd unit files removal is required and adding support for other init-systems (preferred OpenRC for now) to replace it.

Current torsocks version is broken.
It returns the following error when attempting to torify application :

which: no getcap

Description:

cat msg | /usr/sbin/sendmail – sendmail: No such file or directorycannot create temporary file /var/spool/smtpd/offline/1572544775.XXXXIqNsFX

Additional info:
* package version: 6.4.2p1-1.hyperbola2.backports1

It is same problem as here:
https://github.com/OpenSMTPD/OpenSMTPD/issues/839

I could solve it with:

sudo chmod g+s /usr/sbin/smtpctl
sudo chmod g+s /usr/sbin/smtpctl

and then

sudo rc-service smtpd start

Even though I think I should not need to start it to use only sendmail.

In generate_jsimd_ycc_rgb_convert_neon of jsimd_arm64_neon.S, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution in an unprivileged process with no additional execution privileges needed. User interaction is needed for exploitation

https://security-tracker.debian.org/tracker/CVE-2019-2201

Patch: https://github.com/libjpeg-turbo/libjpeg-turbo/issues/388

(gst-plugin-scanner:17336): GStreamer-WARNING : Failed to load plugin ‘/usr/lib/gstreamer-1.0/libgstzbar.so’: libzbar.so.0: cannot open shared object file: No such file or directory
(gst-plugin-scanner:17336): GStreamer-WARNING : Failed to load plugin ‘/usr/lib/gstreamer-1.0/libgstfluidsynthmidi.so’: libfluidsynth.so.1: cannot open shared object file: No such file or directory

Repositorio : extra
Nombre : gstreamer
Versión : 1.12.0-1
Descripción : GStreamer open-source multimedia framework core library
Arquitectura : x86_64
URL : https://gstreamer.freedesktop.org/ Licencias : LGPL Grupos : Nada
Provee : Nada
Depende de : libxml2 glib2 libunwind libcap libelf
Dependencias opcionales : Nada
En conflicto con : Nada
Remplaza a : Nada
Tamaño de la descarga : 1897,45 KiB
Tamaño de la instalación : 17241,00 KiB
Encargado : Jan Alexander Steffens (heftig) jan.steffens@gmail.com Fecha de creación : jue 04 may 2017 14:13:05 -05
Validado por : Suma MD5 Suma SHA-256 Firma

Description:

From official PHP page, our php 7.1 is out of support and security

Our package :
https://www.hyperbola.info/packages/extra/x86_64/php/

PHP page :
https://www.php.net/supported-versions.php

Cannot mix incompatible Qt library (version 0×50800) with this library (version 0×50904)
Aborted

./Nextcloud-2.3.3-x86_64.AppImage: /usr/lib/libQt5Core.so.5: version `Qt_5.9’ not found (required by /tmp/.mount_NextclpprMnG/usr/bin/../lib/libqt5keychain.so.1

These two packages are directly affected by an older qt5...

Could you update all the qt packages to the LTS version available?

Avahi is a zero-configuration networking implementation that contains critical security issues because mDNS operates under a different trust model than unicast DNS trusting the entire network rather than a designated DNS server, it is vulnerable to spoofing attacks by any system within the multicast IP range. Like SNMP and many other network management protocols, it can also be used by attackers to quickly gain detailed knowledge of the network and its machines. [0]

Since it violates the Hyperbola Social Contract , Avahi should be blacklisted.

Description:

• The Arch version of Sage-notebook from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required. OpenRC init script replacement isn’t possible here because Sage-notebook is using a systemd unit file adapted for users instead of system users.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : sage-notebook
Version         : 0.13-4
Description     : Browser-based notebook interface for SageMath
Architecture    : any
URL             : http://www.sagemath.org
Licenses        : GPL3
Groups          : None
Provides        : None
Depends On      : sagemath  python2-twisted  python2-flask-oldsessions  python2-flask-openid  python2-flask-autoindex  python2-flask-babel  mathjax
Optional Deps   : python2-pyopenssl: to use the notebook in secure mode
Conflicts With  : None
Replaces        : None
Download Size   : 1625.00 KiB
Installed Size  : 9154.00 KiB
Packager        : Antonio Rojas <arojas@archlinux.org>
Build Date      : Thu 04 May 2017 06:12:28 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

/usr/lib/systemd/user/sage.service is owned by sage-notebook 0.13-4

Steps to reproduce:

• Install package.

Description:

• The Arch version of Erlang (headless version) from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : erlang-nox
Version         : 19.3-3
Description     : General-purpose concurrent functional programming language developed by Ericsson (headless version)
Architecture    : x86_64
URL             : http://www.erlang.org/
Licenses        : Apache
Groups          : None
Provides        : None
Depends On      : ncurses  openssl
Optional Deps   : erlang-unixodbc: database support
                  java-environment: for Java support
                  lksctp-tools: for SCTP support
Conflicts With  : erlang
Replaces        : None
Download Size   : 39.01 MiB
Installed Size  : 106.73 MiB
Packager        : Jan de Groot <jgc@archlinux.org>
Build Date      : Fri 28 Apr 2017 08:44:33 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

/usr/lib/systemd/system/epmd.service is owned by erlang-nox 19.3-3
/usr/lib/systemd/system/epmd.socket is owned by erlang-nox 19.3-3

Steps to reproduce:

• Install package.

Description:

• The Arch version of Motion from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : motion
Version         : 4.0.1-2
Description     : A software motion detector which grabs images from video4linux devices and/or from webcams
Architecture    : x86_64
URL             : http://www.lavrsen.dk/foswiki/bin/view/Motion/WebHome
Licenses        : GPL
Groups          : None
Provides        : None
Depends On      : libjpeg  v4l-utils  ffmpeg
Optional Deps   : None
Conflicts With  : None
Replaces        : None
Download Size   : 235.61 KiB
Installed Size  : 923.00 KiB
Packager        : Sergej Pupykin <pupykin.s+arch@gmail.com>
Build Date      : Mon 14 Nov 2016 02:17:55 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

/usr/lib/systemd/system/motion.service is owned by motion 4.0.1-2

Steps to reproduce:

• Install package.

Description:

• The Arch version of tinc from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : tinc
Version         : 1.0.31-2
Description     : VPN (Virtual Private Network) daemon
Architecture    : x86_64
URL             : http://www.tinc-vpn.org/
Licenses        : GPL
Groups          : None
Provides        : None
Depends On      : lzo  openssl  zlib
Optional Deps   : None
Conflicts With  : None
Replaces        : None
Download Size   : 107.42 KiB
Installed Size  : 194.00 KiB
Packager        : Evangelos Foutras <evangelos@foutrelis.com>
Build Date      : Mon 13 Mar 2017 01:06:11 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

/usr/lib/systemd/system/tinc.service is owned by tinc 1.0.31-2
/usr/lib/systemd/system/tinc@.service is owned by tinc 1.0.31-2

Steps to reproduce:

• Install package.

Description:

The Arch version of tinc from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repositorio               : community
Nombre                    : netdata
Versión                   : 1.6.0-3
Descripción               : Real-time performance monitoring, in the greatest possible detail, over the web.
Arquitectura              : x86_64
URL                       : https://github.com/firehol/netdata/wiki
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : libmnl  libnetfilter_acct  zlib
Dependencias opcionales   : nodejs: Webbox plugin
                            lm_sensors: sensors module
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1778,98 KiB
Tamaño de la instalación  : 6515,00 KiB
Encargado                 : Sven-Hendrik Haase <sh@lutzhaase.com>
Fecha de creación         : dom 23 abr 2017 16:24:38 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

community/netdata	/usr/lib/systemd/
community/netdata	/usr/lib/systemd/system/
community/netdata	/usr/lib/systemd/system/netdata.service

Steps to reproduce:

• Install package

Description:

Since Hyperbola follows the Init Freedom Campaign, systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)

community/backuppc 4.1.2-1 [installed]

   Enterprise-grade system for backing up Linux, Windows and MacOS PCs

* config and/or log files etc.

Additional info:

Steps to reproduce: install it

Since Hyperbola follows the Init Freedom Campaign, systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)

extra/gpsd 3.16-3 [installed]

   GPS daemon and library to support USB/serial GPS devices

* config and/or log files etc.

Additional info:

Steps to reproduce: install it

Description:

Hiawatha contains only systemd files.

It shall be removed and openrc shall be provided

Description:

• needs OpenRC init script

Additional info:

• onioncat 0.2.2.r578-1

Steps to reproduce:

• none

Description:

• needs OpenRC init script and contains systemd file

Additional info:

• umurmur 0.2.16_a-6

umurmur /usr/lib/systemd/system/umurmur.service

Steps to reproduce:

• none

Description:

• needs OpenRC init script and contains systemd files

Additional info:

• prosody 1:0.10.r7198+.2fd20f372cb1+-2

prosody /usr/lib/systemd/system/prosody.service
prosody /usr/lib/sysusers.d/prosody.conf
prosody /usr/lib/tmpfiles.d/prosody.conf

Steps to reproduce:

• none

Description:

• needs OpenRC init script and contains systemd files

Additional info:

• unrealircd 4.0.11-2

unrealircd /usr/lib/systemd/system/unrealircd.service
unrealircd /usr/lib/tmpfiles.d/unrealircd.conf

Steps to reproduce:

• none

Description:

• needs OpenRC init script and contains systemd file

Additional info:

• mcelog 1:148-1

mcelog /usr/lib/systemd/system/mcelog.service

Steps to reproduce:

• none

Description:

• needs OpenRC init script (bzr serve), like [git] (git-daemon) and [subversion] (svnserve)

Additional info:

• bzr 2.7.0-2

Note: needs a provide: bazaar

Steps to reproduce:

• none

Description:

• needs OpenRC init scripts (hg serve and chg server), like [git] (git-daemon) and [subversion] (svnserve)

Additional info:

• mercurial 4.2-1

Note: needs a provide: hg

Steps to reproduce:

• none

Description:

• Add new a Murmur package capable of working without a graphical user interface. It’s common on servers and embedded devices that requires only interfaces like network (eg. SSH) or serial port to handle services.

Additional info:

• based on murmur 1.2.19-5

Steps to reproduce:

• none

Description:

• Add an Asterisk package capable of working without a graphical user interface. It’s common on servers and embedded devices that requires only interfaces like network (eg. SSH) or serial port to handle services.

Additional info:

• based on asterisk 14.4.0-1

Steps to reproduce:

• none

Description:

• add new package

Additional info:

• https://github.com/coturn/coturn

Steps to reproduce:

• none

Description:

• add GNU MediaGoblin package

Additional info:

• none

Steps to reproduce:

• none

https://www.debian.org/security/2020-GRUB-UEFI-SecureBoot/

https://9to5linux.com/grub2-boot-failure-issues-fixed-in-debian-and-ubuntu-update-now

Seems deleted items reappearing in the Hyperbola feeds since it gives its feed items empty ID string.

After talking to Emulatorman, we think this would be a nice feature to add to our Hyperwiki to be able to subscribe to the original page in English to help tracking changing to the translated pages.
This implies to add the email notifications to the dokuwiki system

So avatar uploading is not working well, and picture is getting minimized to nothing.

The wiki pages look really too narrow and not readable on even half a screen of the laptop.

I could not find any regarding using arch or other branded themes. Parabola apparently rebrands some stuff in their libre repository, eg. they have their own parabola-themes-slim package for slim based themes.

https://issues.hyperbola.info/index.php?do=details&task_id=1213&opened=24&status[0]=

This would ease their usage on other distros.

When I was adding this task, I put some long tags on it (html form allowed that) and got an error concerning too long tags field to fit in an sql datatype (max is 40 chars). Task got added anyway (just without tags). I didn’t know that and created it again.

The Mailling list don't work : https://lists.hyperbola.info//mailman/listinfo/

Hi,

My email server (riseup.net) fails to deliver emails to hyperbola.info. Here’s the error message coming in the returned email:

Reporting-MTA: dns; mx1.riseup.net
X-Postfix-Queue-ID: 49vvwD4xQnzFf2F
X-Postfix-Sender: rfc822; xxxxx@riseup.net
Arrival-Date: Sun, 28 Jun 2020 08:40:44 -0700 (PDT)

Final-Recipient: rfc822; xxxxx@hyperbola.info
Original-Recipient: rfc822;xxxxx@hyperbola.info
Action: failed
Status: 4.7.5
Diagnostic-Code: X-Postfix; Server certificate not verified

This problem did not occur last time I sent emails to a hyperbola.info account (December 2019).
It does not happen with any other destination email server. My guess is that something isn’t properly configured in your server.
If you conclude that this is a riseup.net problem, let me know and I’ll open a bug report with them.

The requirement for TLS 1.2 in email effectively isolated us from internet, and yelling for change isn’t working even in communications with other free/libre system distributions and mailing lists related to free/libre software (both for software and for discussions related to the movement itself). :)

Many mailing lists at gnu.org, fsf.org, fsfla.org, libreplanet.org, and also in other free/libre system distributions aren’t accessible (e.g.: Trisquel).

After confirming the newly created account (typing the confirmation code, the passwoard and its confirmation, and clicking the button to continue), the following error appears:

  Notice: crypt(): No salt parameter was specified. You must use a randomly generated salt and a strong hash function to produce a secure hash. in /srv/http/flyspray/includes/class.flyspray.php on line 656 

The account login seems to work normaly.

The RFC 3461 would allow Hyperbola email accounts to request the destination email providers to point out if an email was successfully delivered.

It might not cover all transport failures, but at least has a chance to know in advance whether the message was delivered, discarding the events that happen afterwards (be it to the main inbox or subject to filtering rules such as moving to other folder, marking as spam or deleted after receipt).

here i will report 2 issues and one change to make
issues:
1- there is a failed smtp error with post and reply
2- in the forum profile one cant add website with .xyz domain name

the change:
1- with pgp key one would add a short key link just like what was mentioned in here:
https://forums.hyperbola.info/viewtopic.php?pid=2639#p2639

To resolve External LinkGmail not receiving emails issue on Android phone, one has to follow some steps such as:
1. First, update or check the server.
2. Then go to Settings and click on the Filters and Blocked Address option.
3. After that, turn on the auto-sync option.
4. Next, change the data server settings.
By following the above-mentioned steps, Android users can resolve this issue. Although if the issue still exists then contact our support team.

To resolve Gmail not receiving emails issue on Android phone, one has to follow some steps such as:
1. First, update or check the server.
2. Then go to Settings and click on the Filters and Blocked Address option.
3. After that, turn on the auto-sync option.
4. Next, change the data server settings.
By following the above-mentioned steps, Android users can resolve this issue. Although if the issue still exists then contact our support team.

Do you ask yourself ‘why is my Epson printer offline’ even when it is turned on? If yes then you are in the right place as we are here to provide you a solution that will fix this issue.
If your printer is linked with an Ethernet cable then ensure that the cable is attached to the router and the printer in a proper manner. If you require an IP address then you can print a network configuration page.
If you are using a USB cable then you should check if it is loose or not. If you think that there is a problem with the USB cable then you can also connect it directly as an alternative to using a hub.
If it is a wireless connection then use the network configuration page to get the IP address and ensure that the printer and the system are both connected to one wifi connection.
https://www.printersupportpro.us/epson-printer-offline

An issue with the scanner is quite possibly the most well-known ones and can be settled in the event that you want to eliminate the Apple Pay to Cash App mistake by utilizing the strategies that you can without much of a stretch find in the assistance community or investigate visiting the technical support locales.

Trying to resolve it? Can’t add cash to cash app For this, avail our cash app technical support for making the issues be rectified instantly. The technical specialists are available around the clock for quick guidance of the cash app users. Users can take help from experts at any time.

Add Hyperbola branding to HyperTask such as HyperWiki and HyperForum for prolixity reasons.

I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,

https://libreboot.org/docs/gnulinux/grub_hardening.html

I wondered if there is anything different that needs to be done to get this part done:

gpg –homedir keys –detach-sign my.initramfs
gpg –homedir keys –detach-sign my.kernel
gpg –homedir keys –detach-sign libreboot_grub.cfg
gpg –homedir keys –detach-sign my.grubtest.cfg

it gives me a bunch of weird errors