All Projects

Description:
Historically, Swiftweasel was a Firefox-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since there are users encouraging us develop a Palemoon-based application , and Swiftweasel contains non-trademarked graphics and logos, we could port Swiftweasel to UXP platform as theme for Iceweasel-UXP.

Description:
Historically, Swiftdove was a Thunderbird-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since FossaMail may potentially be revived on UXP in the future [0] and Swiftdove contains non-trademarked graphics and logos, we could port Swiftdove to UXP platform as theme for Icedove-UXP.

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and RISC-V promises to be a great architecture example for low-power computers, laptops and embedded systems, also as ARM architecture replacement.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the RISC-V architecture (riscv64) with multilib support.

NOTE: RISC-V porting is focused only for Hyperbola GNU/Linux-libre .

Name: New Tab Tools
Version: 81 (compatible Firefox version 52)
Source code: Github
Description: Customize Firefox’s. Tabs Page

https://github.com/darktrojan/newtabtools

https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/

Name: FireGestures
Version: 1.11.1 (compatible Firefox version 52)
Source code: Github
Description: A customizable mouse gestures extension which enables to execute various commands and user scripts with six types of gestures.

https://github.com/gomita/firegestures/

https://addons.mozilla.org/en-US/firefox/addon/firegestures/

the cardbook version is 30.9 i tried with vcard 4.0 and vcard 3.0 same issue editing or creating a contact makes
icedove-uxp crash!

Create hypertools to replace libretools package for HyperbolaBSD and GNU/Linux

It’s long period to develop this package.
For now, a systemd-nspawn wrapper is being developed for “libretools”[0]

[0]:https://issues.hyperbola.info/index.php?do=details&task_id=86

Develop HyperBK (Hyper Berkeley Kernel), a BSD descendant kernel with GPL-compatible licenses preserved, non-compatible ones removed, and new code written under GPL-3 for HyperbolaBSD.

TODO:

• Download OpenBSD kernel source code from OpenBSD site → DONE

• Download LibertyBSD scripts to deblob and rebrand kernel from their scripts. → DONE

• Create a new project in Hyperbola Git called hyperbk. → DONE

• Push source to HyperBK’s project. → DONE

• Rebrand OpenBSD kernel to HyperbolaBSD with LibertyBSD scripts. → DONE

• Rebrand entire code (functions, variable, pointers, etc) under HyperbolaBSD → DONE

• Remove files under non GPL-compatible licenses → DONE

• Import code from another BSD systems under GPL-compatible licenses → IN PROGRESS

• Remove remaining nonfree files don't found from LibertyBSD scripts → IN PROGRESS

• Write new code under GPL-3 → IN PROGRESS

• Package HyperBK for HyperbolaBSD.

PATCHING NOTE

When the check concerns kernel, we obviously want to match with HyperbolaBSD.

Example of triplet check:	hyperbolabsd)
Example of uname -s check:	HyperbolaBSD)
Example of uname -r check:	0.1)
Example of C macro check:	defined(__HyperbolaBSD__)

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and the Power9-based Talos II promises to be a great architecture example for workstations and servers environments where Hyperbola is focused since is a fully free long-term support distribution.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the POWER architecture (power64le).

NOTE: POWER porting is focused only for Hyperbola GNU/Linux-libre .

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and ARM A7/A53 promises to be a great architecture example for low-power computers, laptops and embedded systems.

NOTE: ARM porting is focused only for HyperbolaBSD .

Seems deleted items reappearing in the Hyperbola feeds since it gives its feed items empty ID string.

After talking to Emulatorman, we think this would be a nice feature to add to our Hyperwiki to be able to subscribe to the original page in English to help tracking changing to the translated pages.
This implies to add the email notifications to the dokuwiki system

So avatar uploading is not working well, and picture is getting minimized to nothing.

The wiki pages look really too narrow and not readable on even half a screen of the laptop.

I could not find any regarding using arch or other branded themes. Parabola apparently rebrands some stuff in their libre repository, eg. they have their own parabola-themes-slim package for slim based themes.

https://issues.hyperbola.info/index.php?do=details&task_id=1213&opened=24&status[0]=

This would ease their usage on other distros.

When I was adding this task, I put some long tags on it (html form allowed that) and got an error concerning too long tags field to fit in an sql datatype (max is 40 chars). Task got added anyway (just without tags). I didn’t know that and created it again.

The Mailling list don't work : https://lists.hyperbola.info//mailman/listinfo/

Hi,

My email server (riseup.net) fails to deliver emails to hyperbola.info. Here’s the error message coming in the returned email:

Reporting-MTA: dns; mx1.riseup.net
X-Postfix-Queue-ID: 49vvwD4xQnzFf2F
X-Postfix-Sender: rfc822; xxxxx@riseup.net
Arrival-Date: Sun, 28 Jun 2020 08:40:44 -0700 (PDT)

Final-Recipient: rfc822; xxxxx@hyperbola.info
Original-Recipient: rfc822;xxxxx@hyperbola.info
Action: failed
Status: 4.7.5
Diagnostic-Code: X-Postfix; Server certificate not verified

This problem did not occur last time I sent emails to a hyperbola.info account (December 2019).
It does not happen with any other destination email server. My guess is that something isn’t properly configured in your server.
If you conclude that this is a riseup.net problem, let me know and I’ll open a bug report with them.

The requirement for TLS 1.2 in email effectively isolated us from internet, and yelling for change isn’t working even in communications with other free/libre system distributions and mailing lists related to free/libre software (both for software and for discussions related to the movement itself). :)

Many mailing lists at gnu.org, fsf.org, fsfla.org, libreplanet.org, and also in other free/libre system distributions aren’t accessible (e.g.: Trisquel).

After confirming the newly created account (typing the confirmation code, the passwoard and its confirmation, and clicking the button to continue), the following error appears:

  Notice: crypt(): No salt parameter was specified. You must use a randomly generated salt and a strong hash function to produce a secure hash. in /srv/http/flyspray/includes/class.flyspray.php on line 656 

The account login seems to work normaly.

The RFC 3461 would allow Hyperbola email accounts to request the destination email providers to point out if an email was successfully delivered.

It might not cover all transport failures, but at least has a chance to know in advance whether the message was delivered, discarding the events that happen afterwards (be it to the main inbox or subject to filtering rules such as moving to other folder, marking as spam or deleted after receipt).

here i will report 2 issues and one change to make
issues:
1- there is a failed smtp error with post and reply
2- in the forum profile one cant add website with .xyz domain name

the change:
1- with pgp key one would add a short key link just like what was mentioned in here:
https://forums.hyperbola.info/viewtopic.php?pid=2639#p2639

Add Hyperbola branding to HyperTask such as HyperWiki and HyperForum for prolixity reasons.

I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,

https://libreboot.org/docs/gnulinux/grub_hardening.html

I wondered if there is anything different that needs to be done to get this part done:

gpg –homedir keys –detach-sign my.initramfs
gpg –homedir keys –detach-sign my.kernel
gpg –homedir keys –detach-sign libreboot_grub.cfg
gpg –homedir keys –detach-sign my.grubtest.cfg

it gives me a bunch of weird errors

Some forum display errors:

1. preview button with the orange border.

1. Error message when logging in gray color making it difficult to read

I was using GNU Emacs, and tried to export LaTeX file or make a PDF. It seems that texlive package is broken, some fonts are missing.

The group named texlive-most cannot be properly installed.

admin→ pacsearch texlive

extra/texlive-bibtexextra 2016.43765-1 (texlive-most)
    TeX Live - Additional BibTeX styles and bibliography databases
extra/texlive-bin 2016.41290-12.hyperbola1 [installed]
    TeX Live binaries (Hyperbola rebranded)
extra/texlive-core 2016.43757-1.hyperbola2 (texlive-most) [installed]
    TeX Live core distribution, without nonfree add-on packages (Hyperbola rebranded)
extra/texlive-fontsextra 2016.43763-1.hyperbola2 (texlive-most) [installed]
    TeX Live - all sorts of extra fonts, without nonfree add-on packages
extra/texlive-formatsextra 2016.41438-3 (texlive-most) [installed]
    TeX Live - collection of extra TeX 'formats'
extra/texlive-games 2016.43415-1 (texlive-most)
    TeX Live - Setups for typesetting various board games, including chess
extra/texlive-genericextra 2016.43605-1 (texlive-most) [installed]
    TeX Live - mixed bag of generic macro packages and fonts
extra/texlive-htmlxml 2016.43769-1 (texlive-most)
    TeX Live - Packages to convert LaTeX to XML/HTML, and typeset XML/SGML
extra/texlive-humanities 2016.43711-1 (texlive-most)
    TeX Live - LaTeX packages for law, linguistics, social sciences, and humanities
extra/texlive-langchinese 2016.43669-1 (texlive-lang)
    TeX Live - Fonts and macro packages to typeset Chinese texts
extra/texlive-langcjk 2014.0-1
    TeX Live - CJK (Chinese, Japanese, Korean) metapackage
extra/texlive-langcyrillic 2016.43417-1 (texlive-lang)
    TeX Live - Fonts and macro packages to typeset Cyrillic texts
extra/texlive-langextra 2016.43739-1 (texlive-lang)
    TeX Live - Bundle of all extra language support
extra/texlive-langgreek 2016.43222-1 (texlive-lang)
    TeX Live - Fonts and support for typesetting Greek
extra/texlive-langjapanese 2016.43741-1 (texlive-lang)
    TeX Live - Fonts and macro packages to typeset Japanese texts
extra/texlive-langkorean 2016.43130-1 (texlive-lang)
    TeX Live - Fonts and macro packages to typeset Korean texts
extra/texlive-latexextra 2016.43768-1.hyperbola2 (texlive-most) [installed]
    TeX Live - Large collection of add-on packages for LaTeX, without nonfree add-on packages
extra/texlive-music 2016.43375-1 (texlive-most)
    TeX Live - Music typesetting packages
extra/texlive-pictures 2016.43767-1 (texlive-most) [installed]
    TeX Live - Packages for drawings graphics
extra/texlive-plainextra 2016.43137-1 (texlive-most) [installed]
    TeX Live - A collection of add-on packages and macros for plain TeX
extra/texlive-pstricks 2016.43710-1 (texlive-most) [installed]
    TeX Live - Additional PSTricks packages
extra/texlive-publishers 2016.43764-1 (texlive-most)
    TeX Live - LaTeX classes and packages for specific publishers
extra/texlive-science 2016.43747-1 (texlive-most)
    TeX Live - Typesetting for mathematics, natural and computer sciences

[~]
admin→ sudo pacman -S texlive-most

:: There are 15 members in group texlive-most:
:: Repository extra
   1) texlive-bibtexextra  2) texlive-core  3) texlive-fontsextra  4) texlive-formatsextra  5) texlive-games  6) texlive-genericextra
   7) texlive-htmlxml  8) texlive-humanities  9) texlive-latexextra  10) texlive-music  11) texlive-pictures  12) texlive-plainextra
   13) texlive-pstricks  14) texlive-publishers  15) texlive-science

Enter a selection (default=all):
warning: texlive-core-2016.43757-1.hyperbola2 is up to date -- reinstalling
warning: texlive-fontsextra-2016.43763-1.hyperbola2 is up to date -- reinstalling
warning: texlive-formatsextra-2016.41438-3 is up to date -- reinstalling
warning: texlive-genericextra-2016.43605-1 is up to date -- reinstalling
warning: texlive-latexextra-2016.43768-1.hyperbola2 is up to date -- reinstalling
warning: texlive-pictures-2016.43767-1 is up to date -- reinstalling
warning: texlive-plainextra-2016.43137-1 is up to date -- reinstalling
warning: texlive-pstricks-2016.43710-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...

Packages (15) texlive-bibtexextra-2016.43765-1  texlive-core-2016.43757-1.hyperbola2  texlive-fontsextra-2016.43763-1.hyperbola2
              texlive-formatsextra-2016.41438-3  texlive-games-2016.43415-1  texlive-genericextra-2016.43605-1
              texlive-htmlxml-2016.43769-1  texlive-humanities-2016.43711-1  texlive-latexextra-2016.43768-1.hyperbola2
              texlive-music-2016.43375-1  texlive-pictures-2016.43767-1  texlive-plainextra-2016.43137-1  texlive-pstricks-2016.43710-1
              texlive-publishers-2016.43764-1  texlive-science-2016.43747-1

Total Download Size:     27.66 MiB
Total Installed Size:  1300.90 MiB
Net Upgrade Size:       110.88 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 texlive-bibtexextra-2016.43765-1-any                   1541.4 KiB   275K/s 00:06 [###############################################] 100%
 texlive-games-2016.43415-1-any                          416.5 KiB   356K/s 00:01 [###############################################] 100%
 texlive-htmlxml-2016.43769-1-any                       1197.6 KiB   300K/s 00:04 [###############################################] 100%
 texlive-humanities-2016.43711-1-any                     299.0 KiB   664K/s 00:00 [###############################################] 100%
 texlive-music-2016.43375-1-any                           12.2 MiB   398K/s 00:31 [###############################################] 100%
 texlive-publishers-2016.43764-1-any                       9.2 MiB   471K/s 00:20 [###############################################] 100%
 texlive-science-2016.43747-1-any                          2.9 MiB   376K/s 00:08 [###############################################] 100%
(15/15) checking keys in keyring                                                  [###############################################] 100%
(15/15) checking package integrity                                                [###############################################] 100%
(15/15) loading package files                                                     [###############################################] 100%
(15/15) checking for file conflicts                                               [###############################################] 100%
(15/15) checking available disk space                                             [###############################################] 100%
:: Processing package changes...
( 1/15) reinstalling texlive-core                                                 [###############################################] 100%
>>> updmap custom entries should go into /etc/texmf/web2c/updmap-local.cfg
>>> fmtutil custom entries should go into /etc/texmf/web2c/fmtutil-local.cnf
( 2/15) installing texlive-bibtexextra                                            [###############################################] 100%
( 3/15) reinstalling texlive-fontsextra                                           [###############################################] 100%
( 4/15) reinstalling texlive-formatsextra                                         [###############################################] 100%
( 5/15) installing texlive-games                                                  [###############################################] 100%
( 6/15) reinstalling texlive-genericextra                                         [###############################################] 100%
( 7/15) installing texlive-htmlxml                                                [###############################################] 100%
( 8/15) reinstalling texlive-latexextra                                           [###############################################] 100%
( 9/15) installing texlive-humanities                                             [###############################################] 100%
Optional dependencies for texlive-humanities
    texlive-pictures: for package qtree [installed]
(10/15) installing texlive-music                                                  [###############################################] 100%
Optional dependencies for texlive-music
    python2: for scripts from the lilyglyphs packages [installed]
(11/15) reinstalling texlive-pictures                                             [###############################################] 100%
(12/15) reinstalling texlive-plainextra                                           [###############################################] 100%
(13/15) reinstalling texlive-pstricks                                             [###############################################] 100%
(14/15) installing texlive-publishers                                             [###############################################] 100%
(15/15) installing texlive-science                                                [###############################################] 100%
Optional dependencies for texlive-science
    python2-pygments: for pygmentex
:: Running post-transaction hooks...
(1/3) Updating TeXLive filename database...
(2/3) Updating TeXLive format files...

kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf csr10

! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.

kpathsea: Running mktextfm ecrm1000
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf ecrm1000

! I can't find file `ecrm1000'.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000

Please type another input file name
! Emergency stop.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000

Transcript written on mfput.log.
grep: ecrm1000.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000' failed to make ecrm1000.tfm.
kpathsea: Appending font creation commands to missfont.log.

kpathsea: Running mktextfm ecrm1000
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf ecrm1000

! I can't find file `ecrm1000'.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000

Please type another input file name
! Emergency stop.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000

Transcript written on mfput.log.
grep: ecrm1000.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000' failed to make ecrm1000.tfm.
kpathsea: Appending font creation commands to missfont.log.

kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf csr10

! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.

kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf csr10

! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.
fmtutil [ERROR]: running `pdftex -ini   -jobname=utf8mex -progname=utf8mex -enc *utf8mex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [WARNING]: inifile pdfmex.ini for pdfmex/pdftex not found.
fmtutil [ERROR]: running `pdftex -ini   -jobname=csplain -progname=csplain -etex -enc csplain-utf8.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini   -jobname=pdfjadetex -progname=pdfjadetex *pdfjadetex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini   -jobname=jadetex -progname=jadetex *jadetex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [WARNING]: inifile mex.ini for mex/pdftex not found.
fmtutil [ERROR]: running `xetex -ini   -jobname=pdfcsplain -progname=pdfcsplain -etex csplain.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini   -jobname=pdfcsplain -progname=pdfcsplain -etex -enc csplain-utf8.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `luatex -ini   -jobname=pdfcsplain -progname=pdfcsplain -etex csplain.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
error: command failed to execute correctly
(3/3) Updating TeXLive font maps...
[~]
a

admin-> sudo pacman -R texlive-most
checking dependencies...
:: ghostscript optionally requires texlive-core: needed for dvipdf
:: inkscape optionally requires texlive-core: latex formulas

Packages (15) texlive-bibtexextra-2016.43765-1  texlive-core-2016.43757-1.hyperbola2  texlive-fontsextra-2016.43763-1.hyperbola2  texlive-formatsextra-2016.41438-3  texlive-games-2016.43415-1
              texlive-genericextra-2016.43605-1  texlive-htmlxml-2016.43769-1  texlive-humanities-2016.43711-1  texlive-latexextra-2016.43768-1.hyperbola2  texlive-music-2016.43375-1
              texlive-pictures-2016.43767-1  texlive-plainextra-2016.43137-1  texlive-pstricks-2016.43710-1  texlive-publishers-2016.43764-1  texlive-science-2016.43747-1

Total Removed Size:  1300.90 MiB

:: Do you want to remove these packages? [Y/n] y
:: Processing package changes...
( 1/15) removing texlive-science                                                                                     [######################################################################] 100%
( 2/15) removing texlive-publishers                                                                                  [######################################################################] 100%
( 3/15) removing texlive-pstricks                                                                                    [######################################################################] 100%
( 4/15) removing texlive-plainextra                                                                                  [######################################################################] 100%
( 5/15) removing texlive-pictures                                                                                    [######################################################################] 100%
( 6/15) removing texlive-music                                                                                       [######################################################################] 100%
( 7/15) removing texlive-humanities                                                                                  [######################################################################] 100%
( 8/15) removing texlive-latexextra                                                                                  [######################################################################] 100%
( 9/15) removing texlive-htmlxml                                                                                     [######################################################################] 100%
(10/15) removing texlive-genericextra                                                                                [######################################################################] 100%
(11/15) removing texlive-games                                                                                       [######################################################################] 100%
(12/15) removing texlive-formatsextra                                                                                [######################################################################] 100%
(13/15) removing texlive-fontsextra                                                                                  [######################################################################] 100%
(14/15) removing texlive-bibtexextra                                                                                 [######################################################################] 100%
(15/15) removing texlive-core                                                                                        [######################################################################] 100%
warning: /etc/texmf/web2c/fmtutil.cnf saved as /etc/texmf/web2c/fmtutil.cnf.pacsave
:: Running post-transaction hooks...
(1/3) Updating TeXLive filename database...
warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
/usr/share/libalpm/scripts/mktexlsr: line 4: /usr/bin/mtxrun: No such file or directory
(2/3) Updating TeXLive format files...
cp: cannot stat 'usr/share/texmf-dist/web2c/fmtutil-hdr.cnf': No such file or directory
cat: 'var/lib/texmf/arch/installedpkgs/*.fmts': No such file or directory
/usr/share/libalpm/scripts/texlive-fmtutil: line 18: /usr/bin/fmtutil-sys: No such file or directory
error: command failed to execute correctly
(3/3) Updating TeXLive font maps...
cp: cannot stat 'usr/share/texmf-dist/web2c/updmap-hdr.cfg': No such file or directory
cat: 'var/lib/texmf/arch/installedpkgs/*.maps': No such file or directory
/usr/share/libalpm/scripts/texlive-updmap: line 12: /usr/bin/updmap-sys: No such file or directory
error: command failed to execute correctly
[~]

Description:

• replace deprecated GNU Bazaar to Brezy for Canis Major

Additional info:

• bzr 2.7.0-2
• GNU Bazaar will be unmaintained (for now, there are only bug fixes)
• GNU Bazaar only supports Python 2.
• Python 2.7 is the end of the Python 2 line of development. [0]
• There never will be an official Python 2.8 release.
• Or use Tauthon (fork of Python 2.7) as dependency.

Note: It needs a provide: bazaar and brezy

Steps to reproduce:

• broken package

aqemu only lists GNU/Linux and GNU/Hurd. Since LibertyBSD is also free it should also be added.

php-imagick is an optdepends for many PHP webapps like Nextcloud and Wordpress, would be good to have itin Hyperbola, Arch added it last year

Add “3proxy”[0] package

Useful for tor on ftp proxy[1]

[0]:https://github.com/z3APA3A/3proxy [1]:https://trac.torproject.org/projects/tor/wiki/doc/TorifyHOWTO/FTP

We already have i3lock, this version is an enhanced version available in Arch AUR:
https://aur.archlinux.org/packages/i3lock-color https://aur.archlinux.org/packages/i3lock-color-git/

Iosevka wins a poll about most beautiful fonts on reddit (/r/linux). This font is very similar than Droid Sans (Official Google Font) with many advantages:

1 - Has 5 types modes (lightest, light, normal, bold, super bold)
2 - Condensed and big sizes (perfect for visual impairments users)
3 - Very Legible on i3-wm, Sway, Conky bar
4 - OTF license (Freedom license)

Iosevka is already on AUR, but create a official package prevent bug or proprietary third parties apps (Yaourt, etc) be installed by beginners Hyperbola users.

Official Site:
https://github.com/be5invis/Iosevka

On AUR:
https://aur.archlinux.org/packages/ttf-iosevka

Plymouth is an application that runs very early in the boot process (even before the root filesystem is mounted!) that provides a graphical boot animation while the boot process happens in the background.

Please implement plymouth as an optional package.

Yaics is a simple GNU social client written in C++ and Qt and licensed under the GNU GPL 3.0 (or later).

Please implement yaics as an optional package.

https://stigatle.no/yaics/

https://gitlab.com/stigatle/yaics

Sirikata a platform for virtual worlds.

Sirikata is a platform for virtual worlds. We provide a set of libraries and protocols which can be used to deploy a virtual world, as well as fully featured sample implementations of services for hosting and deploying these worlds.

Please implement sirikata as an optional package.

Hello,

Could it be possible to add this package :

multipath-tools

“Multipath tools for Linux (including kpartx)”

License : GPL2

to the repo ?

Thank you

Could it be possible to add this package :

thinkfan

“A minimalist fan control program. Supports the sysfs hwmon interface and thinkpad_acpi”

License : GPL

to the repo ?

Thanks

Could it be possible to add :

fsearch

https://github.com/cboxdoerfer/fsearch

License : GPL

Could it be possible to add :

flowblade

https://www.parabola.nu/packages/pcr/any/flowblade/

“a multitrack non-linear video editor for GNU/Linux”

License : GPL3

Thanks

Could it be possible to add :

whipper

“A Unix CD ripper aiming for accuracy over speed – forked from morituri”

https://www.parabola.nu/packages/community/any/whipper/ https://github.com/JoeLametta/whipper

License : GPL3

Thanks

Could it be possible to add :

sacd-extract

“Extract DSD files from an SACD image”

https://www.parabola.nu/packages/pcr/x86_64/sacd-extract/ https://sourceforge.net/p/sacd-ripper/

License : GPL2

Thanks

Hello,

Could it be possible to add :

radiotray

“An online radio streaming player that runs on a Linux system tray.”

https://aur.archlinux.org/packages/radiotray/

License : GPL

Thanks

I use Nextcloud for syncing, although, I would normally not ask for this, due to Nextcloud’s appimage being available, but for some reason the latest version doesn’t work on hyperbola. So... yeah.

Usually Nextcloud’s appimage works regardless of what packages you have, so I guess in essence... add Nextcloud-client package to this system is my request.

After installation, none of the addons is present in Kodi!

Could it be possible to add :

ttf-font-awesome

to the repo ?

https://www.parabola.nu/packages/community/any/ttf-font-awesome/ http://fontawesome.io/

Thanks

Could it be possible to add :

awesome-terminal-fonts

to the repo please ?

https://www.parabola.nu/packages/community/any/awesome-terminal-fonts/ https://github.com/gabrielelana/awesome-terminal-fonts

Thanks

Hello,

Could it be possible to add this package :

w_scan

“Universal ATSC and DVB blind scanner”

https://aur.archlinux.org/packages/w_scan/

License : GPL

Thanks

Hello,

Could it be possible to add this package :

qpdfview

“A tabbed PDF viewer using the poppler library.”

https://www.parabola.nu/packages/community/x86_64/qpdfview/

License : GPL2

Thanks