All Projects

Project  descCategoryTask TypePrioritySeveritySummaryStatusProgress
Software DevelopmentIceweasel-UXPImplementation RequestDeferLowSwiftweasel-UXP theme for Iceweasel-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftweasel was a Firefox-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since there are users encouraging us develop a Palemoon-based application , and Swiftweasel contains non-trademarked graphics and logos, we could port Swiftweasel to UXP platform as theme for Iceweasel-UXP.

Software DevelopmentIceweasel-UXPBackport RequestVery LowMediumRequest browser add-on: New Tab ToolsUnconfirmed
0%
Task Description

Name: New Tab Tools
Version: 81 (compatible Firefox version 52)
Source code: Github
Description: Customize Firefox’s. Tabs Page

https://github.com/darktrojan/newtabtools

https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/

Software DevelopmentIceweasel-UXPBackport RequestVery LowVery LowRequest browser add-on: FireGesturesUnconfirmed
0%
Task Description

Name: FireGestures
Version: 1.11.1 (compatible Firefox version 52)
Source code: Github
Description: A customizable mouse gestures extension which enables to execute various commands and user scripts with six types of gestures.

https://github.com/gomita/firegestures/

https://addons.mozilla.org/en-US/firefox/addon/firegestures/

Software DevelopmentIcedove-UXPImplementation RequestDeferLowSwiftdove-UXP theme for Icedove-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftdove was a Thunderbird-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since FossaMail may potentially be revived on UXP in the future [0] and Swiftdove contains non-trademarked graphics and logos, we could port Swiftdove to UXP platform as theme for Icedove-UXP.

Software DevelopmentIcedove-UXPBug ReportVery LowMediumCardBook addon make icedove crash wen adding or editing...Unconfirmed
0%
Task Description

the cardbook version is 30.9 i tried with vcard 4.0 and vcard 3.0 same issue editing or creating a contact makes
icedove-uxp crash!

Software DevelopmentHyperToolsImplementation RequestLowLow[hypertools] create libretools replacement for Hyperbol...Deferred
0%
Task Description

Create hypertools to replace libretools package for HyperbolaBSD and GNU/Linux

It’s long period to develop this package.
For now, a systemd-nspawn wrapper is being developed for “libretools”[0]

[0]:https://issues.hyperbola.info/index.php?do=details&task_id=86

Software DevelopmentHyperBKImplementation RequestVery HighCriticalDevelop a BSD descendant kernel for HyperbolaBSDIn Progress
30%
Task Description

Develop HyperBK (Hyper Berkeley Kernel), a BSD descendant kernel with GPL-compatible licenses preserved, non-compatible ones removed, and new code written under GPL-3 for HyperbolaBSD.

TODO:

  • Download OpenBSD kernel source code from OpenBSD siteDONE
  • Download LibertyBSD scripts to deblob and rebrand kernel from their scripts. → DONE
  • Push source to HyperBK’s project. → DONE
  • Rebrand OpenBSD kernel to HyperbolaBSD with LibertyBSD scripts. → DONE
  • Rebrand entire code (functions, variable, pointers, etc) under HyperbolaBSD → DONE
  • Remove files under non GPL-compatible licenses → DONE
  • Import code from another BSD systems under GPL-compatible licenses → IN PROGRESS
  • Write new code under GPL-3 → IN PROGRESS
  • Package HyperBK for HyperbolaBSD.

PATCHING NOTE

When the check concerns kernel, we obviously want to match with HyperbolaBSD.

Example of triplet check:	hyperbolabsd)
Example of uname -s check:	HyperbolaBSD)
Example of uname -r check:	0.1)
Example of C macro check:	defined(__HyperbolaBSD__)
Software DevelopmentGeneralImplementation RequestVery HighCriticalPOWER (ppc64le) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and the Power9-based Talos II promises to be a great architecture example for workstations and servers environments where Hyperbola is focused since is a fully free long-term support distribution.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the POWER architecture (power64le).

NOTE: POWER porting is focused only for Hyperbola GNU/Linux-libre .

Software DevelopmentGeneralImplementation RequestVery HighCriticalARM (aarch and armv7h) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and ARM A7/A53 promises to be a great architecture example for low-power computers, laptops and embedded systems.

NOTE: ARM porting is focused only for HyperbolaBSD .

Software DevelopmentGeneralImplementation RequestDeferCriticalRISC-V (riscv64) porting + multilib supportDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and RISC-V promises to be a great architecture example for low-power computers, laptops and embedded systems, also as ARM architecture replacement.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the RISC-V architecture (riscv64) with multilib support.

NOTE: RISC-V porting is focused only for Hyperbola GNU/Linux-libre .

ServicesWiki Page IssueImplementation RequestVery LowMediumAdd notification/subscription capabilities when a page ...Unconfirmed
0%
Task Description

After talking to Emulatorman, we think this would be a nice feature to add to our Hyperwiki to be able to subscribe to the original page in English to help tracking changing to the translated pages.
This implies to add the email notifications to the dokuwiki system

ServicesPunBB IssueBug ReportVery LowLowhyperbola forum smtp error and profile updateUnconfirmed
0%
Task Description

here i will report 2 issues and one change to make
issues:
1- there is a failed smtp error with post and reply
2- in the forum profile one cant add website with .xyz domain name

the change:
1- with pgp key one would add a short key link just like what was mentioned in here:
https://forums.hyperbola.info/viewtopic.php?pid=2639#p2639

ServicesPunBB BrandingBug ReportHighHighForum appearance bugsIn Progress
100%
Task Description

Some forum display errors:

  1. preview button with the orange border.
  1. Error message when logging in gray color making it difficult to read
ServicesMail Service IssueFeature RequestVery LowLowSupport RFC 3461: Delivery Status Notifications (DSNs)Unconfirmed
0%
Task Description

The RFC 3461 would allow Hyperbola email accounts to request the destination email providers to point out if an email was successfully delivered.

It might not cover all transport failures, but at least has a chance to know in advance whether the message was delivered, discarding the events that happen afterwards (be it to the main inbox or subject to filtering rules such as moving to other folder, marking as spam or deleted after receipt).

ServicesHyperWiki/DokuWikiImplementation RequestMediumMediumLibreboot hardening grub guideUnconfirmed
0%
Task Description

I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,

https://libreboot.org/docs/gnulinux/grub_hardening.html

I wondered if there is anything different that needs to be done to get this part done:

gpg –homedir keys –detach-sign my.initramfs
gpg –homedir keys –detach-sign my.kernel
gpg –homedir keys –detach-sign libreboot_grub.cfg
gpg –homedir keys –detach-sign my.grubtest.cfg

it gives me a bunch of weird errors

ServicesHyperWiki/DokuWikiImplementation RequestVery LowMediumProvide binaries for the Ice*-UXP applications in their...Unconfirmed
0%
Task Description

This would ease their usage on other distros.

ServicesHyperWeb IssueBug ReportVery LowLowRSS needs fixingUnconfirmed
0%
Task Description

Seems deleted items reappearing in the Hyperbola feeds since it gives its feed items empty ID string.

ServicesHyperWebBug ReportVery LowMediumThe Mailling list don't workUnconfirmed
0%
Task Description

The Mailling list don't work : https://lists.hyperbola.info//mailman/listinfo/

ServicesGeneralFeature RequestVery LowLowhyperbola branding - add guidelines to packagesUnconfirmed
0%
Task Description

I could not find any regarding using arch or other branded themes. Parabola apparently rebrands some stuff in their libre repository, eg. they have their own parabola-themes-slim package for slim based themes.

https://issues.hyperbola.info/index.php?do=details&task_id=1213&opened=24&status[0]=

ServicesGeneralFreedom IssueVery LowLowHow do I resolve Gmail not receiving emails issue on An...Unconfirmed
0%
Task Description

To resolve External LinkGmail not receiving emails issue on Android phone, one has to follow some steps such as:
1. First, update or check the server.
2. Then go to Settings and click on the Filters and Blocked Address option.
3. After that, turn on the auto-sync option.
4. Next, change the data server settings.
By following the above-mentioned steps, Android users can resolve this issue. Although if the issue still exists then contact our support team.

ServicesGeneralFreedom IssueVery LowLowHow do I resolve Gmail not receiving emails issue on An...Unconfirmed
0%
Task Description

To resolve Gmail not receiving emails issue on Android phone, one has to follow some steps such as:
1. First, update or check the server.
2. Then go to Settings and click on the Filters and Blocked Address option.
3. After that, turn on the auto-sync option.
4. Next, change the data server settings.
By following the above-mentioned steps, Android users can resolve this issue. Although if the issue still exists then contact our support team.

ServicesGeneralFreedom IssueVery LowLowWhy is my Epson printer offline?Unconfirmed
0%
Task Description

Do you ask yourself ‘why is my Epson printer offline’ even when it is turned on? If yes then you are in the right place as we are here to provide you a solution that will fix this issue.
If your printer is linked with an Ethernet cable then ensure that the cable is attached to the router and the printer in a proper manner. If you require an IP address then you can print a network configuration page.
If you are using a USB cable then you should check if it is loose or not. If you think that there is a problem with the USB cable then you can also connect it directly as an alternative to using a hub.
If it is a wireless connection then use the network configuration page to get the IP address and ensure that the printer and the system are both connected to one wifi connection.
https://www.printersupportpro.us/epson-printer-offline

ServicesGeneralFreedom IssueVery LowLowIssue with scanner bringing about Apple Pay to Cash App...Unconfirmed
0%
Task Description

An issue with the scanner is quite possibly the most well-known ones and can be settled in the event that you want to eliminate the Apple Pay to Cash App mistake by utilizing the strategies that you can without much of a stretch find in the assistance community or investigate visiting the technical support locales.

ServicesGeneralFreedom IssueVery LowLowWith cash app customer service, get details why I can’t...Unconfirmed
0%
Task Description

Trying to resolve it? Can’t add cash to cash app For this, avail our cash app technical support for making the issues be rectified instantly. The technical specialists are available around the clock for quick guidance of the cash app users. Users can take help from experts at any time.

ServicesFlyspray IssueImplementation RequestVery LowLowSetting avatar picture on flyspry at issues.hyperbola.i...Unconfirmed
0%
Task Description

So avatar uploading is not working well, and picture is getting minimized to nothing.

ServicesFlyspray IssueBug ReportVery LowMedium[Flyspray] long tags break the backendUnconfirmed
0%
Task Description

When I was adding this task, I put some long tags on it (html form allowed that) and got an error concerning too long tags field to fit in an sql datatype (max is 40 chars). Task got added anyway (just without tags). I didn’t know that and created it again.

ServicesFlyspray IssueSecurity IssueVery LowLowAfter account confirmation, crypt: No salt parameter wa...Unconfirmed
0%
Task Description

After confirming the newly created account (typing the confirmation code, the passwoard and its confirmation, and clicking the button to continue), the following error appears:

  Notice: crypt(): No salt parameter was specified. You must use a randomly generated salt and a strong hash function to produce a secure hash. in /srv/http/flyspray/includes/class.flyspray.php on line 656 

The account login seems to work normaly.

ServicesFlyspray BrandingImplementation RequestMediumMediumAdd Hyperbola branding to HyperTaskIn Progress
40%
Task Description

Add Hyperbola branding to HyperTask such as HyperWiki and HyperForum for prolixity reasons.

PackagesTestingImplementation RequestVery LowMedium[yaics] add packageDeferred
0%
Task Description

Yaics is a simple GNU social client written in C++ and Qt and licensed under the GNU GPL 3.0 (or later).

Please implement yaics as an optional package.

https://stigatle.no/yaics/

https://gitlab.com/stigatle/yaics

PackagesTestingImplementation RequestVery LowLow[sirikata] add packageDeferred
0%
Task Description

Sirikata a platform for virtual worlds.

Sirikata is a platform for virtual worlds. We provide a set of libraries and protocols which can be used to deploy a virtual world, as well as fully featured sample implementations of services for hosting and deploying these worlds.

Please implement sirikata as an optional package.

PackagesTestingImplementation RequestLowMedium[spacefm] add new packageIn Progress
0%
Task Description

Add SpaceFM File Manager for Hyperbola

Aur Package: spacefm Debian Package: spacefm

PackagesTestingBug ReportMediumMedium[emacs] crush after swayResearching
0%
Task Description

I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:

1. Run sway
2. Exit sway or killall sway
3. Try running emacs on console, there will be crush
4. log out, log in, and emacs will work on console again

Yet it should not crush.

PackagesTestingImplementation RequestMediumMediumlinux-libre-lts-hypersec: New package with extra securi...Deferred
0%
Task Description

Description: Per a user request and to better secure the kernel, we can embed the cryptsetup and ciphers in the kernel. This would mean rather than exposed modules, they are built-in to the kernel and ready to use even without an intramfs.

To be embedded: ciphers aes, twofish, serpent; sha256, sha512 - and the necessary modules (don’t forget the block modes xts, lvm and cryptsetup ...)

Additionally, we could include USB Guard and any other features that meet our social contract and security outlook.

PackagesTestingReplace RequestVery LowMedium replace request: NetworkManager with wpa_cuteUnconfirmed
0%
Task Description

https://github.com/loh-tar/wpa-cute/releases

I know there are plans to remove NetworkManager. I wondered if we could replace it in 0.4 with Wpa_Cute. seen in the above link.

I haven’t been able to compile it, but it has been updated as recent as 2018 december (stable)

or 2019 january. :)

WPA_GUI doesn’t seem to work well for me, it runs into weird errors when I start it. Long story short, I run into this issue with wpa_supplicant when i do it manually:

https://wiki.archlinux.org/index.php/Wpa_supplicant:

Password-related problems

wpa_supplicant may not work properly if directly passed via stdin particularly long or complex passphrases which include special characters. This may lead to errors such as failed 4-way WPA handshake, PSK may be wrong when launching wpa_supplicant.

In order to solve this try using here strings wpa_passphrase <MYSSID> «< “<passphrase>” or passing a file to the -c flag instead:

# wpa_supplicant -i <interface> -c /etc/wpa_supplicant/example.conf

In some instances it was found that storing the passphrase cleartext in the psk key of the wpa_supplicant.conf network block gave positive results (see [2]). However, this approach is rather insecure. Using wpa_cli to create this file instead of manually writing it gives the best results most of the time and therefore is the recommended way to proceed.
Problems with eduroam and other MSCHAPv2 connections

This is my issue with wpa_supplicant sadly... and I do not know how to workaround that without a GUI.

but Wpa_Supplicant_gui does not fix it either, it doesn’t even load properly on my other laptop.

It says it cannot get the status of wpa_supplicant when I load it.

This could be an issue if you get rid of NetworkManager for some users.

So yeah, please take a look at my request okay? Wait for 0.3 to be released to add this if possible. I know you guys are overworked, etc... and it doesn’t need to be done now anyhow. ;)

PackagesTestingBug ReportVery LowCritical[Hyperbola GNU/Linux-libre 0.4] Installation issue for ...Unconfirmed
0%
Task Description

Description: Problem with execution of “pacstrap /mnt base base-devel syslinux” from 0.3.1-chroot ISO-image with modified pacman.conf and mirrorlist for testing. There are errors for the packages “libxcrypt” and “man-pages” as both have “/usr/share/man/man3/crypt.3.gz” and “/usr”share/man/man3/crypt_r.3.gz” included.

PackagesTestingBug ReportVery LowCritical[Hyperbola GNU/Linux-libre 0.4] Installation for syslin...Unconfirmed
0%
Task Description

Description: Configuration file “syslinux.cfg” under /boot/syslinux/ has to be adjusted. Problem with kernel-images loaded and the concurrent booting device is per default configured to /dev/sda3. Kernel-images are named as “linux-libre” not “linux-libre-lts”.

PackagesStableBug ReportVery LowMedium[kodi-addons-visualization] addons don't workUnconfirmed
0%
Task Description

After installation, none of the addons is present in Kodi!

PackagesStableBug ReportMediumMedium[libusb] error when mounting USB memories on virtual ma...Researching
0%
Task Description

## Bug ##

libusb: error [_get_usbfs_fd] libusb couldn’t open USB device /dev/bus/usb/003/003: permission denied libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.

Reference links: https://askubuntu.com/questions/526962/libusb-couldnt-open-usb-device-dev-bus-usb-002-006-permission-denied-libusb

PackagesStableBug ReportVery LowLowMupen64plus acts buggyUnconfirmed
0%
Task Description

the screen moves back and forth from left to right randomly, no matter what I do, any games any adapters do not work.

I wanted to have some fun with some old games...

Has anyone used mupen64plus successfully on hyperbola 0.2? I cannot get it to work without being completely confusing for the reasons I have mentioned and also, the glaring of the screen. Which only happens with mupen64plus...

PackagesStableBug ReportVery LowMedium[cowsay] perl-text-charwidth dependency missingUnconfirmed
0%
Task Description

cowsay (cowsay-3.03-9.hyperbola1) is missing perl-text-charwidth dependency

Error message :

“Can’t locate Text/CharWidth.pm in @INC (you may need to install the Text::CharWidth module) (@INC contains: /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .) at /usr/bin/cowsay line 14.
BEGIN failed–compilation aborted at /usr/bin/cowsay line 14.”

After installing perl-text-charwidth, it works fine.

PackagesStableUpdate RequestHighHigh[qt5] upgrade Qt project to the 5.6 LTS version, requir...Deferred
0%
Task Description

Cannot mix incompatible Qt library (version 0×50800) with this library (version 0×50904)
Aborted

./Nextcloud-2.3.3-x86_64.AppImage: /usr/lib/libQt5Core.so.5: version `Qt_5.9’ not found (required by /tmp/.mount_NextclpprMnG/usr/bin/../lib/libqt5keychain.so.1

These two packages are directly affected by an older qt5...

Could you update all the qt packages to the LTS version available?

PackagesStableBug ReportMediumMedium[linux-libre-lts] [i915] Display freeze : hpd interrupt...Deferred
0%
Task Description

Hello,

I recently acquired a T400 Thinkpad with 1440×900 panel.
On this T400, I installed Hyperbola, just like on my x200 Thinkpad with 1280×800 panel.

Both Thinkpad are running the same Hyperbola installation :

Full disk encryption (with Libreboot) so both Thinkpad are using early KMS (MODULES=”i915” in /etc/mkinitcpio.conf)
Same kernel : linux-libre-lts (4.9.99 at the moment I’m writing this message)
video driver : modesetting
DE : xfce4 with xfwm4

On the Thinkpad x200, everything works great, no issue to report.

On the T400 though, the linux-libre-lts kernel, I’m getting random display freezes, when it happens, this message appears in dmesg :

hpd interrupt storm detected on connector hdmi-a-1

And the display (and sound) freezes for 10 seconds (sometimes more !)

As Hyperbola proposes linux-libre-lts kernel only, I installed latest linux-libre-lts (4.14.40) and linux-libre (4.16.8) from Parabola GNU/Linux repo.

Results :

With 4.14.40 : Same issue as with 4.9.99 kernel from Hyperbola repo.
With 4.16.8 : Issue is not present ! No more freeze !

I’m not sure how to proceed though. Would you be kind enough helping me to find which commit in i915 driver improved the situation ? If we find it, maybe it could be added as a patch to 4.9.x kernel series.
Or maybe it is something else.. I don’t have much experience, I can provide logs if needed.

Thanks for your help

PackagesStableBug ReportVery LowMedium[nfs-utils] missing idmapd.confUnconfirmed
0%
Task Description

Hello,

When mounting an NFS share, I get a warning about missing idmpad.conf

rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
4341: * Stopping idmapd ...

Debian includes a default config file for idmap :

[General]

Verbosity = 0
Pipefs-Directory = /run/rpc_pipefs
# set your own domain here, if id differs from FQDN minus hostname
# Domain = localdomain

[Mapping]

Nobody-User = nobody
Nobody-Group = nogroup
PackagesStableFeature RequestVery LowLow[digikam]: /usr/bin/cleanup_digikamdb: line 61: kreadco...Unconfirmed
0%
Task Description

Description:

I just guess that this script cleanup_digikamdb depends on kreadconfig which is not there.

Additional info:

extra/digikam 5.5.0-2.hyperbola1 [installed]

  Digital photo management application for KDE

Steps to reproduce:

$ cleanup_digikamdb

/usr/bin/cleanup_digikamdb: line 61: kreadconfig: command not found


                  Cleanup Databases v1.1 (digiKam )                    

————————————————————————-
/usr/bin/cleanup_digikamdb: line 61: kreadconfig: command not found
This program only handles SQLite databases.
[~]

PackagesStableBug ReportMediumMedium[virt-install] ERROR '_OsVariant' object has no attribu...Requires Testing
100%
Task Description

Trying to create a VM using virt-install (1.4.1-2.hyperbola2)

virt-install --connect qemu:///system \
--name debian \
--ram 1024 \
--disk path=/home/test/debian.img,size=50 \
--vcpus 2 \
--os-type linux \
--os-variant generic \
--network bridge=virbr0 \
--graphics none \
--console pty,target_type=serial \
--location 'http://ftp.nl.debian.org/debian/dists/stretch/main/installer-amd64/' \
--extra-args 'console=ttyS0,115200n8 serial'

This error shows up :
ERROR : ‘_OsVariant’ object has no attribute ‘urldistro’

I can’t create the VM.

PS : Error is not present on Debian Stretch with virt-install 1.4.0-5

Thanks for your help.

PackagesStableFeature RequestVery LowLow[iceweasel-uxp] Request browser add-on: Privacy Setting...Unconfirmed
0%
Task Description

Name: Privacy Settings
Version: 0.2.6 (compatible Firefox version 52.* to 56.*)
Author: Jeremy Schomery (j_schomery)
Licence: Mozilla Public Licence (MPL) 2.0
Source code: Github
Description: Alter Firefox’s built-in privacy settings easily with a toolbar panel.

PackagesStableFeature RequestVery LowLow[iceweasel-uxp] Request browser add-on: Classic Theme R...Unconfirmed
0%
Task Description

Name: Classic Theme Restorer
Version: 1.7.7.2 (compatible Firefox version 45.* to 56.*)
Author: Aris (Aris-t2)
Licence: Mozilla Public Licence (MPL) 2.0
Source code: Github
Description: Squared tabs, application menu, add-on bar, small button view and many more ‘old’ features for ‘Firefox 29-56’, not for Firefox 57+!

PackagesStableBug ReportVery LowVery LowGajim "Unable to run gpg - it may not be available" Assigned
0%
Task Description

Description:

Gajim XMPP Client wont start after installing python2-gnupg.

Additional info:
* package version(s)

  community/python2-gnupg 0.4.0-2
  extra/gajim 0.16.8-1.hyperbola2

* config and/or log files etc.

/usr/lib/python2.7/site-packages/gajim/common/gajim.py

Steps to reproduce:

With Gajim working is not possible to assign an OpenPGP key because it needs a wrapper. Therefore python2-gnupgp package is needed. But after installing python2-gnupgp, Gajim doesn’t start. The following output is displayed from the console:


07/21/2018 18:00:41 (E) gajim.c.gnupg Unable to run gpg - it may not be available.
Traceback (most recent call last):

File "/usr/lib/python2.7/site-packages/gnupg.py", line 757, in __init__
  p = self._open_subprocess(["--version"])
File "/usr/lib/python2.7/site-packages/gnupg.py", line 832, in _open_subprocess
  startupinfo=si)
File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
  errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
  raise child_exception

OSError: [Errno 2] No such file or directory
Traceback (most recent call last):

File "gajim.py", line 513, in <module>
  interface.run()
File "/usr/lib/python2.7/site-packages/gajim/gui_interface.py", line 2704, in run
  self.roster = roster_window.RosterWindow()
File "/usr/lib/python2.7/site-packages/gajim/roster_window.py", line 6611, in __init__
  connection_zeroconf.ConnectionZeroconf(gajim.ZEROCONF_ACC_NAME)
File "/usr/lib/python2.7/site-packages/gajim/common/zeroconf/connection_zeroconf.py", line 68, in __init__
  CommonConnection.__init__(self, name)
File "/usr/lib/python2.7/site-packages/gajim/common/connection.py", line 150, in __init__
  self.gpg = gpg.GnuPG()
File "/usr/lib/python2.7/site-packages/gajim/common/gpg.py", line 37, in __init__
  gnupg.GPG.__init__(self, gpgbinary=gajim.GPG_BINARY, use_agent=use_agent)
File "/usr/lib/python2.7/site-packages/gnupg.py", line 761, in __init__
  raise OSError(msg)

OSError: Unable to run gpg - it may not be available.


After doing some search, the issue is that gajim.py is trying to call ‘gpg’ as ‘gpg1’.

# grep -n GPG_BINARY /usr/lib/python2.7/site-packages/gajim/common/gajim.py
162:GPG_BINARY = ‘gpg1’

By replacing ‘gpg’ instead of ‘gpg1’, Gajim will start normally with OpenPGP feature available.

Maybe a newer revision of python2-gnupg is required or maybe a small patch in the current package.

PackagesStableBug ReportVery LowHighjava cacerts file is emptyUnconfirmed
0%
Task Description

/etc/ssl/certs/java/cacerts has 0 entries, resulting in ssl handshake errors in java applications.

Package versions:
* ca-certificates 20170307-1
* ca-certificates-utils 20170307-1

PackagesStableBug ReportVery LowMediumPCManFM display different behaviorUnconfirmed
0%
Task Description

Description:

The problem is pcmanfm is not showing any partitions on the left side. It only show Home Folder, Desktop, Applications, Filesystem and the ext. hdd. If I include dbus-launch pcmanfm -d command, it show the other partitions on the left side of window but not ext. hdd. The drive/partitions are not encrypted.
I do have dbus, gvfs & ntfs-3g installed and active services.

Additional info:
* package version(s)
PCManFM 1.2.5 - using LibFM ver. 1.2.5

Steps to reproduce:
Original install from the livecd with LXDE but I may run Openbox standalone and get the same behavior with either environment. I do not have this issue running other distros.

Showing tasks 1 - 50 of 516 Page 1 of 111 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing