All Projects

The version I desire is this: 1.16.4.6

This already works for it, but I just thought I would request it to be put in.

Name: New Tab Tools
Version: 81 (compatible Firefox version 52)
Source code: Github
Description: Customize Firefox’s. Tabs Page

https://github.com/darktrojan/newtabtools

https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/

Name: FireGestures
Version: 1.11.1 (compatible Firefox version 52)
Source code: Github
Description: A customizable mouse gestures extension which enables to execute various commands and user scripts with six types of gestures.

https://github.com/gomita/firegestures/

https://addons.mozilla.org/en-US/firefox/addon/firegestures/

random_agent_spoofer-0.9.5.8.4-fx.xpi is the version I desire, can you implement it?

greasemonkey-3.31.4 version desired. I would love to see it implemented for Iceape

I would like this to be available for Iceape as well V4.13

1.2.4 version would be nice for Iceape.

Hello,

I recently acquired a T400 Thinkpad with 1440×900 panel.
On this T400, I installed Hyperbola, just like on my x200 Thinkpad with 1280×800 panel.

Both Thinkpad are running the same Hyperbola installation :

Full disk encryption (with Libreboot) so both Thinkpad are using early KMS (MODULES=”i915” in /etc/mkinitcpio.conf)
Same kernel : linux-libre-lts (4.9.99 at the moment I’m writing this message)
video driver : modesetting
DE : xfce4 with xfwm4

On the Thinkpad x200, everything works great, no issue to report.

On the T400 though, the linux-libre-lts kernel, I’m getting random display freezes, when it happens, this message appears in dmesg :

hpd interrupt storm detected on connector hdmi-a-1

And the display (and sound) freezes for 10 seconds (sometimes more !)

As Hyperbola proposes linux-libre-lts kernel only, I installed latest linux-libre-lts (4.14.40) and linux-libre (4.16.8) from Parabola GNU/Linux repo.

Results :

With 4.14.40 : Same issue as with 4.9.99 kernel from Hyperbola repo.
With 4.16.8 : Issue is not present ! No more freeze !

I’m not sure how to proceed though. Would you be kind enough helping me to find which commit in i915 driver improved the situation ? If we find it, maybe it could be added as a patch to 4.9.x kernel series.
Or maybe it is something else.. I don’t have much experience, I can provide logs if needed.

Thanks for your help

I was using GNU Emacs, and tried to export LaTeX file or make a PDF. It seems that texlive package is broken, some fonts are missing.

The group named texlive-most cannot be properly installed.

admin→ pacsearch texlive

extra/texlive-bibtexextra 2016.43765-1 (texlive-most)
    TeX Live - Additional BibTeX styles and bibliography databases
extra/texlive-bin 2016.41290-12.hyperbola1 [installed]
    TeX Live binaries (Hyperbola rebranded)
extra/texlive-core 2016.43757-1.hyperbola2 (texlive-most) [installed]
    TeX Live core distribution, without nonfree add-on packages (Hyperbola rebranded)
extra/texlive-fontsextra 2016.43763-1.hyperbola2 (texlive-most) [installed]
    TeX Live - all sorts of extra fonts, without nonfree add-on packages
extra/texlive-formatsextra 2016.41438-3 (texlive-most) [installed]
    TeX Live - collection of extra TeX 'formats'
extra/texlive-games 2016.43415-1 (texlive-most)
    TeX Live - Setups for typesetting various board games, including chess
extra/texlive-genericextra 2016.43605-1 (texlive-most) [installed]
    TeX Live - mixed bag of generic macro packages and fonts
extra/texlive-htmlxml 2016.43769-1 (texlive-most)
    TeX Live - Packages to convert LaTeX to XML/HTML, and typeset XML/SGML
extra/texlive-humanities 2016.43711-1 (texlive-most)
    TeX Live - LaTeX packages for law, linguistics, social sciences, and humanities
extra/texlive-langchinese 2016.43669-1 (texlive-lang)
    TeX Live - Fonts and macro packages to typeset Chinese texts
extra/texlive-langcjk 2014.0-1
    TeX Live - CJK (Chinese, Japanese, Korean) metapackage
extra/texlive-langcyrillic 2016.43417-1 (texlive-lang)
    TeX Live - Fonts and macro packages to typeset Cyrillic texts
extra/texlive-langextra 2016.43739-1 (texlive-lang)
    TeX Live - Bundle of all extra language support
extra/texlive-langgreek 2016.43222-1 (texlive-lang)
    TeX Live - Fonts and support for typesetting Greek
extra/texlive-langjapanese 2016.43741-1 (texlive-lang)
    TeX Live - Fonts and macro packages to typeset Japanese texts
extra/texlive-langkorean 2016.43130-1 (texlive-lang)
    TeX Live - Fonts and macro packages to typeset Korean texts
extra/texlive-latexextra 2016.43768-1.hyperbola2 (texlive-most) [installed]
    TeX Live - Large collection of add-on packages for LaTeX, without nonfree add-on packages
extra/texlive-music 2016.43375-1 (texlive-most)
    TeX Live - Music typesetting packages
extra/texlive-pictures 2016.43767-1 (texlive-most) [installed]
    TeX Live - Packages for drawings graphics
extra/texlive-plainextra 2016.43137-1 (texlive-most) [installed]
    TeX Live - A collection of add-on packages and macros for plain TeX
extra/texlive-pstricks 2016.43710-1 (texlive-most) [installed]
    TeX Live - Additional PSTricks packages
extra/texlive-publishers 2016.43764-1 (texlive-most)
    TeX Live - LaTeX classes and packages for specific publishers
extra/texlive-science 2016.43747-1 (texlive-most)
    TeX Live - Typesetting for mathematics, natural and computer sciences

[~]
admin→ sudo pacman -S texlive-most

:: There are 15 members in group texlive-most:
:: Repository extra
   1) texlive-bibtexextra  2) texlive-core  3) texlive-fontsextra  4) texlive-formatsextra  5) texlive-games  6) texlive-genericextra
   7) texlive-htmlxml  8) texlive-humanities  9) texlive-latexextra  10) texlive-music  11) texlive-pictures  12) texlive-plainextra
   13) texlive-pstricks  14) texlive-publishers  15) texlive-science

Enter a selection (default=all):
warning: texlive-core-2016.43757-1.hyperbola2 is up to date -- reinstalling
warning: texlive-fontsextra-2016.43763-1.hyperbola2 is up to date -- reinstalling
warning: texlive-formatsextra-2016.41438-3 is up to date -- reinstalling
warning: texlive-genericextra-2016.43605-1 is up to date -- reinstalling
warning: texlive-latexextra-2016.43768-1.hyperbola2 is up to date -- reinstalling
warning: texlive-pictures-2016.43767-1 is up to date -- reinstalling
warning: texlive-plainextra-2016.43137-1 is up to date -- reinstalling
warning: texlive-pstricks-2016.43710-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...

Packages (15) texlive-bibtexextra-2016.43765-1  texlive-core-2016.43757-1.hyperbola2  texlive-fontsextra-2016.43763-1.hyperbola2
              texlive-formatsextra-2016.41438-3  texlive-games-2016.43415-1  texlive-genericextra-2016.43605-1
              texlive-htmlxml-2016.43769-1  texlive-humanities-2016.43711-1  texlive-latexextra-2016.43768-1.hyperbola2
              texlive-music-2016.43375-1  texlive-pictures-2016.43767-1  texlive-plainextra-2016.43137-1  texlive-pstricks-2016.43710-1
              texlive-publishers-2016.43764-1  texlive-science-2016.43747-1

Total Download Size:     27.66 MiB
Total Installed Size:  1300.90 MiB
Net Upgrade Size:       110.88 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 texlive-bibtexextra-2016.43765-1-any                   1541.4 KiB   275K/s 00:06 [###############################################] 100%
 texlive-games-2016.43415-1-any                          416.5 KiB   356K/s 00:01 [###############################################] 100%
 texlive-htmlxml-2016.43769-1-any                       1197.6 KiB   300K/s 00:04 [###############################################] 100%
 texlive-humanities-2016.43711-1-any                     299.0 KiB   664K/s 00:00 [###############################################] 100%
 texlive-music-2016.43375-1-any                           12.2 MiB   398K/s 00:31 [###############################################] 100%
 texlive-publishers-2016.43764-1-any                       9.2 MiB   471K/s 00:20 [###############################################] 100%
 texlive-science-2016.43747-1-any                          2.9 MiB   376K/s 00:08 [###############################################] 100%
(15/15) checking keys in keyring                                                  [###############################################] 100%
(15/15) checking package integrity                                                [###############################################] 100%
(15/15) loading package files                                                     [###############################################] 100%
(15/15) checking for file conflicts                                               [###############################################] 100%
(15/15) checking available disk space                                             [###############################################] 100%
:: Processing package changes...
( 1/15) reinstalling texlive-core                                                 [###############################################] 100%
>>> updmap custom entries should go into /etc/texmf/web2c/updmap-local.cfg
>>> fmtutil custom entries should go into /etc/texmf/web2c/fmtutil-local.cnf
( 2/15) installing texlive-bibtexextra                                            [###############################################] 100%
( 3/15) reinstalling texlive-fontsextra                                           [###############################################] 100%
( 4/15) reinstalling texlive-formatsextra                                         [###############################################] 100%
( 5/15) installing texlive-games                                                  [###############################################] 100%
( 6/15) reinstalling texlive-genericextra                                         [###############################################] 100%
( 7/15) installing texlive-htmlxml                                                [###############################################] 100%
( 8/15) reinstalling texlive-latexextra                                           [###############################################] 100%
( 9/15) installing texlive-humanities                                             [###############################################] 100%
Optional dependencies for texlive-humanities
    texlive-pictures: for package qtree [installed]
(10/15) installing texlive-music                                                  [###############################################] 100%
Optional dependencies for texlive-music
    python2: for scripts from the lilyglyphs packages [installed]
(11/15) reinstalling texlive-pictures                                             [###############################################] 100%
(12/15) reinstalling texlive-plainextra                                           [###############################################] 100%
(13/15) reinstalling texlive-pstricks                                             [###############################################] 100%
(14/15) installing texlive-publishers                                             [###############################################] 100%
(15/15) installing texlive-science                                                [###############################################] 100%
Optional dependencies for texlive-science
    python2-pygments: for pygmentex
:: Running post-transaction hooks...
(1/3) Updating TeXLive filename database...
(2/3) Updating TeXLive format files...

kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf csr10

! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.

kpathsea: Running mktextfm ecrm1000
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf ecrm1000

! I can't find file `ecrm1000'.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000

Please type another input file name
! Emergency stop.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000

Transcript written on mfput.log.
grep: ecrm1000.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000' failed to make ecrm1000.tfm.
kpathsea: Appending font creation commands to missfont.log.

kpathsea: Running mktextfm ecrm1000
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf ecrm1000

! I can't find file `ecrm1000'.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000

Please type another input file name
! Emergency stop.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000

Transcript written on mfput.log.
grep: ecrm1000.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000' failed to make ecrm1000.tfm.
kpathsea: Appending font creation commands to missfont.log.

kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf csr10

! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.

kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf csr10

! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.
fmtutil [ERROR]: running `pdftex -ini   -jobname=utf8mex -progname=utf8mex -enc *utf8mex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [WARNING]: inifile pdfmex.ini for pdfmex/pdftex not found.
fmtutil [ERROR]: running `pdftex -ini   -jobname=csplain -progname=csplain -etex -enc csplain-utf8.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini   -jobname=pdfjadetex -progname=pdfjadetex *pdfjadetex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini   -jobname=jadetex -progname=jadetex *jadetex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [WARNING]: inifile mex.ini for mex/pdftex not found.
fmtutil [ERROR]: running `xetex -ini   -jobname=pdfcsplain -progname=pdfcsplain -etex csplain.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini   -jobname=pdfcsplain -progname=pdfcsplain -etex -enc csplain-utf8.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `luatex -ini   -jobname=pdfcsplain -progname=pdfcsplain -etex csplain.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
error: command failed to execute correctly
(3/3) Updating TeXLive font maps...
[~]
a

admin-> sudo pacman -R texlive-most
checking dependencies...
:: ghostscript optionally requires texlive-core: needed for dvipdf
:: inkscape optionally requires texlive-core: latex formulas

Packages (15) texlive-bibtexextra-2016.43765-1  texlive-core-2016.43757-1.hyperbola2  texlive-fontsextra-2016.43763-1.hyperbola2  texlive-formatsextra-2016.41438-3  texlive-games-2016.43415-1
              texlive-genericextra-2016.43605-1  texlive-htmlxml-2016.43769-1  texlive-humanities-2016.43711-1  texlive-latexextra-2016.43768-1.hyperbola2  texlive-music-2016.43375-1
              texlive-pictures-2016.43767-1  texlive-plainextra-2016.43137-1  texlive-pstricks-2016.43710-1  texlive-publishers-2016.43764-1  texlive-science-2016.43747-1

Total Removed Size:  1300.90 MiB

:: Do you want to remove these packages? [Y/n] y
:: Processing package changes...
( 1/15) removing texlive-science                                                                                     [######################################################################] 100%
( 2/15) removing texlive-publishers                                                                                  [######################################################################] 100%
( 3/15) removing texlive-pstricks                                                                                    [######################################################################] 100%
( 4/15) removing texlive-plainextra                                                                                  [######################################################################] 100%
( 5/15) removing texlive-pictures                                                                                    [######################################################################] 100%
( 6/15) removing texlive-music                                                                                       [######################################################################] 100%
( 7/15) removing texlive-humanities                                                                                  [######################################################################] 100%
( 8/15) removing texlive-latexextra                                                                                  [######################################################################] 100%
( 9/15) removing texlive-htmlxml                                                                                     [######################################################################] 100%
(10/15) removing texlive-genericextra                                                                                [######################################################################] 100%
(11/15) removing texlive-games                                                                                       [######################################################################] 100%
(12/15) removing texlive-formatsextra                                                                                [######################################################################] 100%
(13/15) removing texlive-fontsextra                                                                                  [######################################################################] 100%
(14/15) removing texlive-bibtexextra                                                                                 [######################################################################] 100%
(15/15) removing texlive-core                                                                                        [######################################################################] 100%
warning: /etc/texmf/web2c/fmtutil.cnf saved as /etc/texmf/web2c/fmtutil.cnf.pacsave
:: Running post-transaction hooks...
(1/3) Updating TeXLive filename database...
warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
/usr/share/libalpm/scripts/mktexlsr: line 4: /usr/bin/mtxrun: No such file or directory
(2/3) Updating TeXLive format files...
cp: cannot stat 'usr/share/texmf-dist/web2c/fmtutil-hdr.cnf': No such file or directory
cat: 'var/lib/texmf/arch/installedpkgs/*.fmts': No such file or directory
/usr/share/libalpm/scripts/texlive-fmtutil: line 18: /usr/bin/fmtutil-sys: No such file or directory
error: command failed to execute correctly
(3/3) Updating TeXLive font maps...
cp: cannot stat 'usr/share/texmf-dist/web2c/updmap-hdr.cfg': No such file or directory
cat: 'var/lib/texmf/arch/installedpkgs/*.maps': No such file or directory
/usr/share/libalpm/scripts/texlive-updmap: line 12: /usr/bin/updmap-sys: No such file or directory
error: command failed to execute correctly
[~]

Description:
The /usr/sbin directory in spamassassin has permissions 755
https://git.hyperbola.info:50100/packages/extra.git/tree/spamassassin/PKGBUILD#n88

And ‘filesystem’ sets it to 750
https://git.hyperbola.info:50100/packages/core.git/tree/filesystem/PKGBUILD#n135

So when installing spamassassin, pacman throws a warning

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

Additional info:
* spamassassin 3.4.2-1.hyperbola2

Description:
The /usr/sbin directory in postfix has permissions 755
https://git.hyperbola.info:50100/packages/extra.git/tree/postfix/PKGBUILD#n115

And ‘filesystem’ sets it to 750
https://git.hyperbola.info:50100/packages/core.git/tree/filesystem/PKGBUILD#n135

So when installing postfix, pacman throws a warning

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

Additional info:
* postfix-3.2.2-1.hyperbola6

Some forum display errors:

1. preview button with the orange border.

1. Error message when logging in gray color making it difficult to read

Rebuilt version (using PKGBUILD from Arch) works fine. Same is true for lxmusic-gtk3 (which the PKGBUILD also builds).

https://git.archlinux.org/svntogit/community.git/tree/trunk?h=packages/lxmusic

Description:

lsusb does not resolve device names from /var/lib/usbutils/usb.ids

The same thing as described here: https://unix.stackexchange.com/questions/220759/lsusb-doesnt-list-device-names

Description:

• Fix package name to erlang-headless that is the correct name for packages without graphical user interface support. nox suffix is incorrect because Hyperbola supports Wayland too, not only X.Org.

Additional info:
* package version(s)

• 19.3-3

* config and/or log files etc.

Steps to reproduce:

• None

Description:

• Fix package name to qbittorrent-headless that is the correct name for packages without graphical user interface support. nox suffix is incorrect because Hyperbola supports Wayland too, not only X.Org.

Additional info:
* package version(s)

• 3.3.11-1

* config and/or log files etc.

Steps to reproduce:

• None

Description:

cat msg | /usr/sbin/sendmail – sendmail: No such file or directorycannot create temporary file /var/spool/smtpd/offline/1572544775.XXXXIqNsFX

Additional info:
* package version: 6.4.2p1-1.hyperbola2.backports1

It is same problem as here:
https://github.com/OpenSMTPD/OpenSMTPD/issues/839

I could solve it with:

sudo chmod g+s /usr/sbin/smtpctl
sudo chmod g+s /usr/sbin/smtpctl

and then

sudo rc-service smtpd start

Even though I think I should not need to start it to use only sendmail.

(gst-plugin-scanner:17336): GStreamer-WARNING : Failed to load plugin ‘/usr/lib/gstreamer-1.0/libgstzbar.so’: libzbar.so.0: cannot open shared object file: No such file or directory
(gst-plugin-scanner:17336): GStreamer-WARNING : Failed to load plugin ‘/usr/lib/gstreamer-1.0/libgstfluidsynthmidi.so’: libfluidsynth.so.1: cannot open shared object file: No such file or directory

Repositorio : extra
Nombre : gstreamer
Versión : 1.12.0-1
Descripción : GStreamer open-source multimedia framework core library
Arquitectura : x86_64
URL : https://gstreamer.freedesktop.org/ Licencias : LGPL Grupos : Nada
Provee : Nada
Depende de : libxml2 glib2 libunwind libcap libelf
Dependencias opcionales : Nada
En conflicto con : Nada
Remplaza a : Nada
Tamaño de la descarga : 1897,45 KiB
Tamaño de la instalación : 17241,00 KiB
Encargado : Jan Alexander Steffens (heftig) jan.steffens@gmail.com Fecha de creación : jue 04 may 2017 14:13:05 -05
Validado por : Suma MD5 Suma SHA-256 Firma

Trying to create a VM using virt-install (1.4.1-2.hyperbola2)

virt-install --connect qemu:///system \
--name debian \
--ram 1024 \
--disk path=/home/test/debian.img,size=50 \
--vcpus 2 \
--os-type linux \
--os-variant generic \
--network bridge=virbr0 \
--graphics none \
--console pty,target_type=serial \
--location 'http://ftp.nl.debian.org/debian/dists/stretch/main/installer-amd64/' \
--extra-args 'console=ttyS0,115200n8 serial'

This error shows up :
ERROR : ‘_OsVariant’ object has no attribute ‘urldistro’

I can’t create the VM.

PS : Error is not present on Debian Stretch with virt-install 1.4.0-5

Thanks for your help.

I probably should’ve mentioned this before, but if it is set to suspend when lid is closed, it should automatically lock. if the security option: lock screen with system is set to sleep is tweaked on it doesn’t lock always.

This is word for word what I wrote in the forums, but yeah... it is a problem say if someone wants to use your laptop without your permission and can do so.

But it is also a problem if you set it to lock instead because it is more prone to overheating when your not using it, and it doesn’t suspend quickly enough.

I have tried this many times and the same story can be told, again and again.

I think this issue should be considered high or critical merely because of the privacy risk if someone gets their hands on your laptop while its on. Even if you have been away... :/

I wonder if anyone else has this issue... well you guys will tell me I am sure. if critical doesn’t match what you think I am sure you will change it. ;)

Current torsocks version is broken.
It returns the following error when attempting to torify application :

which: no getcap

Description:

cant open /usr/local/lib/english.hash

Additional info:

Repository      : extra
Name            : ispell
Version         : 3.3.02-7
Description     : An interactive spell-checking program for Unix
Architecture    : x86_64
URL             : http://ficus-www.cs.ucla.edu/geoff/ispell.html
Licenses        : BSD
Groups          : None
Provides        : None
Depends On      : ncurses
Optional Deps   : None
Conflicts With  : None
Replaces        : None
Download Size   : 321.26 KiB
Installed Size  : 1336.00 KiB
Packager        : Evangelos Foutras <evangelos@foutrelis.com>
Build Date      : Sun Sep 6 12:07:06 2015
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

- Install package

If you do a command line rc-status on urxvt terminal, the name of the column of services are hidden. You will only see the status columns. Example:

Runlevel: default
  started  ]
  started  ]
  started  ]
  started  ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
Dynamic Runlevel: hotplugged
Dynamic Runlevel: needed/wanted
  started  ]
  started  ]
  started  ]d
Dynamic Runlevel: manual

## Bug ##

libusb: error [_get_usbfs_fd] libusb couldn’t open USB device /dev/bus/usb/003/003: permission denied libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.

Reference links: https://askubuntu.com/questions/526962/libusb-couldnt-open-usb-device-dev-bus-usb-002-006-permission-denied-libusb

I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:

1. Run sway
2. Exit sway or killall sway
3. Try running emacs on console, there will be crush
4. log out, log in, and emacs will work on console again

Yet it should not crush.

Description:
Something is wrong with the latest version packaged in Hyperbola. zathura-pdf-poppler is unable to process apostrophes displayed in pdf bookmarks.

Steps to reproduce:
Open any pdf file which has a summary included, then hit `Tab` to display the summary. Instead of apostrophes, zathura-pdf-poppler displays html entities while the output of zathura-pdf-mupdf is correct.

Description:

crystal build src/invidious.cr –release

Error in src/invidious.cr:19: while requiring "kemal"

require "kemal"
^

in lib/kemal/src/kemal.cr:4: while requiring "./kemal/*"

require "./kemal/*"
^

in lib/kemal/src/kemal/config.cr:26: expanding macro

    property static_headers : (HTTP::Server::Response, String, File::Info -> Void)?
    ^~~~~~~~

in lib/kemal/src/kemal/config.cr:26: expanding macro

    property static_headers : (HTTP::Server::Response, String, File::Info -> Void)?
    ^

in macro 'property' expanded macro: macro_48177600:567, line 4:

   1.       
   2.         
   3.           
>  4.             @static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil
   5. 
   6.             def static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil
   7.               @static_headers
   8.             end
   9. 
  10.             def static_headers=(@static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil)
  11.             end
  12.           
  13.         
  14.       
  15.     

undefined constant File::Info

Additional info:
* package version(s)

Crystal 0.22.0 (2017-04-22) LLVM 4.0.0

Steps to reproduce:

Description:
notmuch-mutt fails to compile without perl-mail-message which is missing in Hyperbola

Steps to reproduce:
Install notmuch-mutt and try `notmuch-mutt` at the command line. Then install `perl-mail-message` from Arch and try again.

I do not know how to solve this. Some of packages is causing this problem. I do not know which one.

Description:

(4/4) Updating the MIME type database...
Unknown media type in type ‘chemical/x-alchemy’ Unknown media type in type ‘chemical/x-cache’ Unknown media type in type ‘chemical/x-cactvs-ascii’ Unknown media type in type ‘chemical/x-cactvs-binary’ Unknown media type in type ‘chemical/x-cactvs-table’ Unknown media type in type ‘chemical/x-cdx’ Unknown media type in type ‘chemical/x-cdxml’ Unknown media type in type ‘chemical/x-chem3d’ Unknown media type in type ‘chemical/x-cif’ Unknown media type in type ‘chemical/x-cml’ Unknown media type in type ‘chemical/x-daylight-smiles’ Unknown media type in type ‘chemical/x-dmol’ Unknown media type in type ‘chemical/x-gamess-input’ Unknown media type in type ‘chemical/x-gamess-output’ Unknown media type in type ‘chemical/x-gaussian-input’ Unknown media type in type ‘chemical/x-gaussian-log’ Unknown media type in type ‘chemical/x-genbank’ Unknown media type in type ‘chemical/x-gulp’ Unknown media type in type ‘chemical/x-hin’ Unknown media type in type ‘chemical/x-inchi’ Unknown media type in type ‘chemical/x-inchi-xml’ Unknown media type in type ‘chemical/x-jcamp-dx’ Unknown media type in type ‘chemical/x-macromodel-input’ Unknown media type in type ‘chemical/x-mdl-molfile’ Unknown media type in type ‘chemical/x-mdl-rdfile’ Unknown media type in type ‘chemical/x-mdl-rxnfile’ Unknown media type in type ‘chemical/x-mdl-sdfile’ Unknown media type in type ‘chemical/x-mdl-tgf’ Unknown media type in type ‘chemical/x-mmcif’ Unknown media type in type ‘chemical/x-mol2’ Unknown media type in type ‘chemical/x-mopac-graph’ Unknown media type in type ‘chemical/x-mopac-input’ Unknown media type in type ‘chemical/x-mopac-out’ Unknown media type in type ‘chemical/x-msi-car’ Unknown media type in type ‘chemical/x-msi-hessian’ Unknown media type in type ‘chemical/x-msi-mdf’ Unknown media type in type ‘chemical/x-msi-msi’ Unknown media type in type ‘chemical/x-ncbi-asn1’ Unknown media type in type ‘chemical/x-ncbi-asn1-binary’ Unknown media type in type ‘chemical/x-ncbi-asn1-xml’ Unknown media type in type ‘chemical/x-pdb’ Unknown media type in type ‘chemical/x-shelx’ Unknown media type in type ‘chemical/x-vmd’ Unknown media type in type ‘chemical/x-xyz’ Unknown media type in type ‘all/all’ Unknown media type in type ‘all/allfiles’

When dmcrypt service start, the “/” filesystem is remounted, mtab is updated and bootmisc is recording the login users, by waiting time scheduling:

* root: waiting for dmcrypt (50 seconds)
* root: timed out waiting for dmcrypt
* Remounting root filesystem read/write ...
* Remounting filesystems ...
* mtab: waiting for dmcrypt (50 seconds)
* mtab: timed out waiting for dmcrypt
* Updating /etc/mtab ...
* Creating mtab symbolic link
* bootmisc: waiting to dmcrypt (50 seconds)
* bootmisc: timed out waiting for dmcrypt
* Creating user login records ...

These features on dmcrypt service are useless and these lines print above filesystem passphrase order (the printed line), those ones break printed console and print the pressed keyboard digit when I’m setting up password.
Sometimes this breaks services startup, and I need press “enter” consecutively to allow run the services.

dmcrypt service can’t umount luks filesystem on reboot/shutdown, device or resource busy:

* Removing dm-crypt mappings
* foobar-pv
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
Device foobar-pv is still in use                                              [ !! ]

admin→ gimp IMG_20170909_153350828.jpg
GEGL-Message: Module ‘/usr/lib/gegl-0.3/lens-correct.so’ load error: liblensfun.so.1: cannot open shared object file: No such file or directory
GEGL-Message: Module ‘/usr/lib/gegl-0.3/matting-levin.so’ load error: libumfpack.so.5: cannot open shared object file: No such file or directory

(gimp:12519): GLib-GObject-WARNING **: g_object_set_valist: object class ‘GeglConfig’ has no property named ‘cache-size’

Those are errors I get when running Gimp.

Description:

Gajim XMPP Client wont start after installing python2-gnupg.

Additional info:
* package version(s)

  community/python2-gnupg 0.4.0-2
  extra/gajim 0.16.8-1.hyperbola2

* config and/or log files etc.

/usr/lib/python2.7/site-packages/gajim/common/gajim.py

Steps to reproduce:

With Gajim working is not possible to assign an OpenPGP key because it needs a wrapper. Therefore python2-gnupgp package is needed. But after installing python2-gnupgp, Gajim doesn’t start. The following output is displayed from the console:

07/21/2018 18:00:41 (E) gajim.c.gnupg Unable to run gpg - it may not be available.
Traceback (most recent call last):

File "/usr/lib/python2.7/site-packages/gnupg.py", line 757, in __init__
  p = self._open_subprocess(["--version"])
File "/usr/lib/python2.7/site-packages/gnupg.py", line 832, in _open_subprocess
  startupinfo=si)
File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
  errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
  raise child_exception

OSError: [Errno 2] No such file or directory
Traceback (most recent call last):

File "gajim.py", line 513, in <module>
  interface.run()
File "/usr/lib/python2.7/site-packages/gajim/gui_interface.py", line 2704, in run
  self.roster = roster_window.RosterWindow()
File "/usr/lib/python2.7/site-packages/gajim/roster_window.py", line 6611, in __init__
  connection_zeroconf.ConnectionZeroconf(gajim.ZEROCONF_ACC_NAME)
File "/usr/lib/python2.7/site-packages/gajim/common/zeroconf/connection_zeroconf.py", line 68, in __init__
  CommonConnection.__init__(self, name)
File "/usr/lib/python2.7/site-packages/gajim/common/connection.py", line 150, in __init__
  self.gpg = gpg.GnuPG()
File "/usr/lib/python2.7/site-packages/gajim/common/gpg.py", line 37, in __init__
  gnupg.GPG.__init__(self, gpgbinary=gajim.GPG_BINARY, use_agent=use_agent)
File "/usr/lib/python2.7/site-packages/gnupg.py", line 761, in __init__
  raise OSError(msg)

OSError: Unable to run gpg - it may not be available.

After doing some search, the issue is that gajim.py is trying to call ‘gpg’ as ‘gpg1’.

# grep -n GPG_BINARY /usr/lib/python2.7/site-packages/gajim/common/gajim.py
162:GPG_BINARY = ‘gpg1’

By replacing ‘gpg’ instead of ‘gpg1’, Gajim will start normally with OpenPGP feature available.

Maybe a newer revision of python2-gnupg is required or maybe a small patch in the current package.

Description:

Devede fails to convert transcoded videos to iso format with libburn-1.5.0.

Drive current: -outdev 'stdio:/home/heckyel/movie/movie.iso'
Media current: stdio file, overwriteable
Media status : is blank
Media summary: 0 sessions, 0 data blocks, 0 data,  334g free
xorriso : FAILURE : -as genisofs: Unsupported option '-dvd-video'
xorriso : NOTE : -return_with SORRY 32 triggered by problem severity FAI

Additional info:

$ pacman -Si devede
Repositorio               : community
Nombre                    : devede
Versión                   : 4.8.8-1
Descripción               : A program to create VideoDVDs and CDs
Arquitectura              : any
URL                       : http://www.rastersoft.com/programas/devede.html
Licencias                 : GPL3
Grupos                    : Nada
Provee                    : Nada
Depende de                : mencoder  ffmpeg  dvdauthor  vcdimager  cdrkit  ttf-dejavu
                            gtk3  python-cairo  python-gobject  python-setuptools
Dependencias opcionales   : mplayer
                            vlc
                            mpv
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1640,88 KiB
Tamaño de la instalación  : 3331,00 KiB
Encargado                 : Sergej Pupykin <pupykin.s+arch@gmail.com>
Fecha de creación         : vie 10 feb 2017 05:06:37 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

Link’s code:

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/mkisofs.py#L61

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/genisoimage.py#L61

Steps to reproduce:

- Install devede
- Create video DVD disc

Additional info:
* package version

Repositorio               : community
Nombre                    : clamtk
Versión                   : 5.24-1
Descripción               : Easy to use, light-weight, on-demand virus scanner for Linux
                            systems
Arquitectura              : any
URL                       : https://dave-theunsub.github.io/clamtk/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : clamav  perl  gtk2-perl  perl-locale-gettext  perl-libwww
                            perl-http-message  perl-lwp-protocol-https  perl-text-csv
                            perl-json  python  zenity  desktop-file-utils  gnome-icon-theme
                            cron
Dependencias opcionales   : Nada
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 179,90 KiB
Tamaño de la instalación  : 1378,00 KiB
Encargado                 : Levente Polyak <anthraxx@archlinux.org>
Fecha de creación         : sáb 19 nov 2016 20:25:20 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

$ clamtk
Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «clearlooks», at /usr/lib/perl5/vendor_perl/ClamTk/GUI.pm line 35.

Steps to reproduce:

* Install clamtk in all version

It worked fine on the previous version of Hyperbola. The word user/username does not show up. A workaround is to wait 10 seconds and enter the username and click enter - then it will switch correctly to the password screen (otherwise you need to enter the username and password at least twice in order to successfully login).

Hello,

I’m unable to print some pdfs on my Hyperbola 3.0 system.
Some background :

cups is installed, service enabled and working
system-config-printer is installed and my printer has been correctly added.

I can print most pdfs and text files but recently with a pdf, it fails to print it.* And system-config-printer returned the following error (see capture) :

Printer "EPSON XP-620-Series" requires the '/usr/lib/cups/filters/epson-escpr-wrapper' but it is not currently installed.

Currently, “epson-escpr-wrapper” is installed but it is in :

/usr/libexec/cups/filters/epson-escpr-wrapper

Looking at source code of system-config-printer, it expects that wrapper to be installed in “/usr/lib/” so I tried to symlink that “epson-escpr-wrapper” to “/usr/lib/cups/filters” but it doesn’t work..

*With a Debian system and the exact same configuration, the “problematic” pdf prints just fine so it is not an issue with the pdf.

After installation, none of the addons is present in Kodi!

Seems deleted items reappearing in the Hyperbola feeds since it gives its feed items empty ID string.

remmina dev ask to inform package maintainer, here is the discussion:

https://github.com/FreeRDP/Remmina/issues/1513#issuecomment-373128671

Would be nice to update or add a patch if available

the screen moves back and forth from left to right randomly, no matter what I do, any games any adapters do not work.

I wanted to have some fun with some old games...

Has anyone used mupen64plus successfully on hyperbola 0.2? I cannot get it to work without being completely confusing for the reasons I have mentioned and also, the glaring of the screen. Which only happens with mupen64plus...

cowsay (cowsay-3.03-9.hyperbola1) is missing perl-text-charwidth dependency

Error message :

“Can’t locate Text/CharWidth.pm in @INC (you may need to install the Text::CharWidth module) (@INC contains: /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .) at /usr/bin/cowsay line 14.
BEGIN failed–compilation aborted at /usr/bin/cowsay line 14.”

After installing perl-text-charwidth, it works fine.

Hello,

When mounting an NFS share, I get a warning about missing idmpad.conf

rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
4341: * Stopping idmapd ...

Debian includes a default config file for idmap :

[General]

Verbosity = 0
Pipefs-Directory = /run/rpc_pipefs
# set your own domain here, if id differs from FQDN minus hostname
# Domain = localdomain

[Mapping]

Nobody-User = nobody
Nobody-Group = nogroup

Description:

I have tried all combinations, but despite “noauto” specified in /etc/fstab all devices get mounted at boot.

Who can help me, not to mount a device during boot?

/etc/ssl/certs/java/cacerts has 0 entries, resulting in ssl handshake errors in java applications.

Package versions:
* ca-certificates 20170307-1
* ca-certificates-utils 20170307-1

The wiki pages look really too narrow and not readable on even half a screen of the laptop.

Description:

The problem is pcmanfm is not showing any partitions on the left side. It only show Home Folder, Desktop, Applications, Filesystem and the ext. hdd. If I include dbus-launch pcmanfm -d command, it show the other partitions on the left side of window but not ext. hdd. The drive/partitions are not encrypted.
I do have dbus, gvfs & ntfs-3g installed and active services.

Additional info:
* package version(s)
PCManFM 1.2.5 - using LibFM ver. 1.2.5

Steps to reproduce:
Original install from the livecd with LXDE but I may run Openbox standalone and get the same behavior with either environment. I do not have this issue running other distros.

After enabling show-flags via dconf-editor in org.mate.peripherals-keyboard-xkb.indicator the flags don’t show up. The simple workaround is to copy flags you want into ~/.icons/flags (after creating the directory) from here

https://github.com/linuxmint/flags/tree/master/usr/share/iso-flag-png

and then to reboot.

It seems to be this bug:

https://askubuntu.com/questions/1059324/how-to-show-current-keyboard-layout-on-mate-panel-as-country-flag/1059325#1059325