All Projects

Project  ascCategoryTask TypePrioritySeveritySummaryStatusProgress
PackagesStableImplementation RequestVery LowLow[codelite] Adding new packageUnconfirmed
0%
Task Description

The IDE codelite is an excellent development environment, continuously updated, has a clear vision and active support.
Would be nice to have this one within the repositories in upcoming releases, perhaps 0.5?

PackagesStableBug ReportVery LowMediumlinphonec error (cli version)Unconfirmed
0%
Task Description

Description:
linphonec is unusable because a error produce a continuous log

Additional info:
linphone 3.11.1-1.hyperbola1

Steps to reproduce:
linphonec

Log:
linphonec> 2019-12-15 19:25:58:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:03:012 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:08:018 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:13:013 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:18:016 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:23:014 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:28:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:33:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:38:012 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:43:015 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:48:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:53:010 ortp-error-Error in connect: Network is unreachable

PackagesStableUpdate RequestVery LowLow[icewm] Upgrade package versionUnconfirmed
0%
Task Description

The current version of the package icewm within the Hyperbola-repositories is 1.3.8. The latest version is 1.6.3!
An update would be helpful as this window-manager follows absolutely the principles of the distribution Hyperbola itself, being simple and fast.

PackagesStableBug ReportVery LowCritical[smartmontools] update-smart-drivedb fails to updateRequires Testing
100%
Task Description

smartmontools 6.5-1.hyperbola1

Error while trying to update smart-drivedb :

anon@test[~] update-smart-drivedb

External Link/usr/bin/update-smart-drivedb: download from branches/RELEASE_6_5_DRIVEDB failed (curl: exit 23) /usr/bin/update-smart-drivedb: download from trunk failed (curl: exit 23)

PackagesStableSecurity IssueVery LowCritical[lts-kernel][sec] filter /dev/mem access & restrict acc...Unconfirmed
0%
Task Description

These two options could be enabled :

Kernel hacking → [*] Filter access to /dev/mem
[*] Filter I/O access to /dev/mem

Security options → [*] Restrict unprivileged access to the kernel syslog

PackagesStableBug ReportVery LowLow[dhcpcd-ui] Adding icons from "Network-Manager Applet"Unconfirmed
0%
Task Description

When using the package for wireless connections no further icon is displayed without having the package [b]network-manager-applet[/b] installed.

PackagesStableBug ReportVery LowHigh[ispell] require FHSRequires Testing
100%
Task Description

Description:

cant open /usr/local/lib/english.hash

Additional info:

Repository      : extra
Name            : ispell
Version         : 3.3.02-7
Description     : An interactive spell-checking program for Unix
Architecture    : x86_64
URL             : http://ficus-www.cs.ucla.edu/geoff/ispell.html
Licenses        : BSD
Groups          : None
Provides        : None
Depends On      : ncurses
Optional Deps   : None
Conflicts With  : None
Replaces        : None
Download Size   : 321.26 KiB
Installed Size  : 1336.00 KiB
Packager        : Evangelos Foutras <evangelos@foutrelis.com>
Build Date      : Sun Sep 6 12:07:06 2015
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

- Install package

PackagesStableSecurity IssueVery LowMedium[git] Multiple CVEsUnconfirmed
0%
Task Description

CVE-2020-5260 has been fixed very recently in Debian, so I thought I would apply this patch. However, I found out that security patches have not been applied for quite a while (I could account for at least 6 CVEs).

Considering that the version in Debian stretch (2.11.0) is the nearest version with security patches released by Debian and that git project oldest supported version is 2.17, I have used patches from Debian stretch to apply on 2.12.2 currently in Milky Way.

But I have the following error on check():

 |  *** prove ***
 |
 |  Test Summary Report
 |  -------------------
 |  t5570-git-daemon.sh                              (Wstat: 256 Tests: 20 Failed: 10)
 |    Failed tests:  3-7, 15-19
 |    Non-zero exit status: 1
 |  t5811-proto-disable-git.sh                       (Wstat: 256 Tests: 26 Failed: 16)
 |    Failed tests:  2-6, 9-11, 15-19, 21-23
 |    Non-zero exit status: 1
 |  Files=769, Tests=14137, 1101 wallclock secs ( 8.08 usr  1.12 sys + 144.48 cusr 63.42 csys = 217.10 CPU)
 |  Result: FAIL
 |  make[1]: *** [Makefile:45: prove] Error 1
 |  make[1]: Leaving directory '/build/git/src/git-2.12.2/t'
 |  make: *** [Makefile:2291: test] Error 2
 |  ==> ERROR: A failure occurred in check().
 |      Aborting...

This does not seem to be related to my change as the current version in Milky Way produces the same error (IOW the package currently in Milky Way is not rebuidable).

PackagesStableBug ReportVery LowCritical[gtk-2] Severe problems with GTK2-applicationsUnconfirmed
0%
Task Description

Description: Since the migration to xenocara there seems to be a bug with applications using GTK-2. From time to time there are crashes with assertion `!xcb_xlib_threads_sequence_lost’.

Looking into this a little bit more deep there are also other distributions affected and this is an upstream-bug. But the concrete situation is not that easy, while it could be also part of the library libX11 itself. Looking therefore here: https://bugs.launchpad.net/ubuntu/+source/pcmanfm/+bug/1782984

Affected are for example LXDE in general, icedove, iceweasel and many more!

PackagesStableBug ReportVery LowMediumUntrsuted gpg keyUnconfirmed
0%
Task Description

Description:
There is an issue with Christian Rebischke key, i’ve tried to delete /etc/pacman.d/gnupg/ and repopulate it but it doesn’t fix the issue.

error: ascii: signature from “Christian Rebischke (Arch Linux Security Team-Member) Chris.Rebischke@archlinux.org” is unknown trust
File /var/cache/pacman/pkg/ascii-3.15-2-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).

Steps to reproduce:

sudo pacman -S ascii

PackagesStableUpdate RequestVery LowMedium[varnish] Missing init scriptUnconfirmed
0%
Task Description

Description:

Init script is missing for this package.

I think has some systemd dependecies.

/tmp/alpm_sYmHUS/.INSTALL: line 7: systemd-sysusers: command not found
error: command failed to execute correctly

package version: varnish-5.1.2-1

PackagesStableBug ReportVery LowMediumnouveau_drv.so: undefined symbol: exaDriverAllocUnconfirmed
0%
Task Description

Any attempt to load Nouveau in X server results in the following error:

nouveau_drv.so: undefined symbol: exaDriverAlloc

Additional info

Steps to reproduce

  1. Stop the X server.
  2. Add a section such as the following to “/etc/X11/xorg.conf”:
    Section "Device"
      Identifier "Video card"
      Driver "nouveau"
      Option "Backlight" "nv_backlight"
    EndSection
  3. Start the X server.
PackagesTestingImplementation RequestVery LowMedium[yaics] add packageDeferred
0%
Task Description

Yaics is a simple GNU social client written in C++ and Qt and licensed under the GNU GPL 3.0 (or later).

Please implement yaics as an optional package.

https://stigatle.no/yaics/

https://gitlab.com/stigatle/yaics

PackagesTestingImplementation RequestVery LowLow[sirikata] add packageDeferred
0%
Task Description

Sirikata a platform for virtual worlds.

Sirikata is a platform for virtual worlds. We provide a set of libraries and protocols which can be used to deploy a virtual world, as well as fully featured sample implementations of services for hosting and deploying these worlds.

Please implement sirikata as an optional package.

PackagesTestingImplementation RequestLowMedium[spacefm] add new packageIn Progress
0%
Task Description

Add SpaceFM File Manager for Hyperbola

Aur Package: spacefm Debian Package: spacefm

PackagesTestingBug ReportMediumMedium[emacs] crush after swayResearching
0%
Task Description

I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:

1. Run sway
2. Exit sway or killall sway
3. Try running emacs on console, there will be crush
4. log out, log in, and emacs will work on console again

Yet it should not crush.

PackagesTestingImplementation RequestMediumMediumlinux-libre-lts-hypersec: New package with extra securi...Deferred
0%
Task Description

Description: Per a user request and to better secure the kernel, we can embed the cryptsetup and ciphers in the kernel. This would mean rather than exposed modules, they are built-in to the kernel and ready to use even without an intramfs.

To be embedded: ciphers aes, twofish, serpent; sha256, sha512 - and the necessary modules (don’t forget the block modes xts, lvm and cryptsetup ...)

Additionally, we could include USB Guard and any other features that meet our social contract and security outlook.

PackagesTestingReplace RequestVery LowMedium replace request: NetworkManager with wpa_cuteUnconfirmed
0%
Task Description

https://github.com/loh-tar/wpa-cute/releases

I know there are plans to remove NetworkManager. I wondered if we could replace it in 0.4 with Wpa_Cute. seen in the above link.

I haven’t been able to compile it, but it has been updated as recent as 2018 december (stable)

or 2019 january. :)

WPA_GUI doesn’t seem to work well for me, it runs into weird errors when I start it. Long story short, I run into this issue with wpa_supplicant when i do it manually:

https://wiki.archlinux.org/index.php/Wpa_supplicant:

Password-related problems

wpa_supplicant may not work properly if directly passed via stdin particularly long or complex passphrases which include special characters. This may lead to errors such as failed 4-way WPA handshake, PSK may be wrong when launching wpa_supplicant.

In order to solve this try using here strings wpa_passphrase <MYSSID> «< “<passphrase>” or passing a file to the -c flag instead:

# wpa_supplicant -i <interface> -c /etc/wpa_supplicant/example.conf

In some instances it was found that storing the passphrase cleartext in the psk key of the wpa_supplicant.conf network block gave positive results (see [2]). However, this approach is rather insecure. Using wpa_cli to create this file instead of manually writing it gives the best results most of the time and therefore is the recommended way to proceed.
Problems with eduroam and other MSCHAPv2 connections

This is my issue with wpa_supplicant sadly... and I do not know how to workaround that without a GUI.

but Wpa_Supplicant_gui does not fix it either, it doesn’t even load properly on my other laptop.

It says it cannot get the status of wpa_supplicant when I load it.

This could be an issue if you get rid of NetworkManager for some users.

So yeah, please take a look at my request okay? Wait for 0.3 to be released to add this if possible. I know you guys are overworked, etc... and it doesn’t need to be done now anyhow. ;)

PackagesTestingBug ReportVery LowCritical[Hyperbola GNU/Linux-libre 0.4] Installation issue for ...Unconfirmed
0%
Task Description

Description: Problem with execution of “pacstrap /mnt base base-devel syslinux” from 0.3.1-chroot ISO-image with modified pacman.conf and mirrorlist for testing. There are errors for the packages “libxcrypt” and “man-pages” as both have “/usr/share/man/man3/crypt.3.gz” and “/usr”share/man/man3/crypt_r.3.gz” included.

PackagesTestingBug ReportVery LowCritical[Hyperbola GNU/Linux-libre 0.4] Installation for syslin...Unconfirmed
0%
Task Description

Description: Configuration file “syslinux.cfg” under /boot/syslinux/ has to be adjusted. Problem with kernel-images loaded and the concurrent booting device is per default configured to /dev/sda3. Kernel-images are named as “linux-libre” not “linux-libre-lts”.

PackagesTestingBug ReportHighCritical[Hyperbola GNU/Linux-libre 0.4] Problems with sndio fai...Requires Testing
90%
Task Description

There are issues with the current sndio-package as it seems not possible to get this to work with ALSA.

PackagesTestingFeature RequestVery LowMedium[Hyperbola GNU/Linux-Libre 0.4] [lumina-core] Replace t...Unconfirmed
0%
Task Description

Also known as “Replace the distributor logo as the startup dialogue, and app menu and start button icons from generic” in the long title because of character limitation.

If the distributor logo icon isn’t present, simply insert it and link few others into the appropriate paths that I made and attached below there.

Here is the list of the paths you do:

/usr/share/icons/material-design-{dark,light}/scalable/places/:

  • distributor-logo.svg
  • distributor-logo-hyperbola.svg (symlink of * distributor-logo.svg)
  • start-here{,-hyperbola,-lumina}.svg (symlink of distributor-logo.svg)
PackagesTestingImplementation RequestVery LowLow[Hyperbola GNU/Linux-libre 0.4] [polygen{,-data}] Add p...Unconfirmed
0%
Task Description

Is that package worth using to generate every sentence of any kind?

Polygen:

PackagesTestingBug ReportVery LowHigh[xenocara-xkbcomp] Could not resolve keysym XF86FullScr...Unconfirmed
0%
Task Description

While the X session is still running, did anyone happen key bindings being unresponsive? A few lines of errors appeared from xkbcomp because of a missing keyboard symbol on the single TTY. It reads:

The XKEYBOARD keymap compiler (xkbcomp) reports:
> error:   Could not resolve keysym XF86FullScreen
Errors from xkbcomp are not fatal to the X server

See also related issues affected on other existing distros, were eventually resolved:

PackagesTestingBug ReportMediumMedium[Hyperbola GNU/Linux 0.4] Problems with touch- / trackp...Assigned
0%
Task Description

Description: Not finally tested, only getting the logs from chat within here for better analysis later on. User reported that touchpad is not working for now with Hyperbola GNU/Linux 0.4. dmesg-messagelog:

[anonymous@anonymous ~]$ dmesg | grep pad
[ 4.766853] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[ 4.823723] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0×840300/0x2e800/0×0, board id: 3127, fw id: 8526786

PackagesTestingBug ReportMediumMedium[Hyperbola GNU/Linux 0.4] Problems with ALSA and sndio ...Unconfirmed
0%
Task Description

Description: User reporting problems with sndio. A further check with ALSA showed no active device being used. User has HDMI-sound in usage.

PackagesTestingBug ReportVery LowVery Low[Hyperbola GNU/Linux-libre 0.4] [wine-stable] doesn't r...Unconfirmed
0%
Task Description

The title says that above if without having required library dependencies for most of them under 32-bit.

PackagesTestingBug ReportMediumMedium[Hyperbola GNU/Linux-libre 0.4] - Package [android-file...Researching
0%
Task Description

Application is not starting and needs therefore a rework.

PackagesTestingBug ReportVery LowHigh[Hyperbola GNU/Linux-libre 0.4] Video driver issues wit...Unconfirmed
0%
Task Description

After setting up and testing our 32-bit QEMU instance, we often tried to initialize the X11, but it refused to do because of video driver issues.

As well as changing to other video drivers on our instance is still the exact issue.

Here is a log from X11 below we attached.

ServicesFlyspray BrandingImplementation RequestMediumMediumAdd Hyperbola branding to HyperTaskIn Progress
40%
Task Description

Add Hyperbola branding to HyperTask such as HyperWiki and HyperForum for prolixity reasons.

ServicesFlyspray IssueImplementation RequestVery LowLowSetting avatar picture on flyspry at issues.hyperbola.i...Unconfirmed
0%
Task Description

So avatar uploading is not working well, and picture is getting minimized to nothing.

ServicesFlyspray IssueBug ReportVery LowMedium[Flyspray] long tags break the backendUnconfirmed
0%
Task Description

When I was adding this task, I put some long tags on it (html form allowed that) and got an error concerning too long tags field to fit in an sql datatype (max is 40 chars). Task got added anyway (just without tags). I didn’t know that and created it again.

ServicesFlyspray IssueSecurity IssueVery LowLowAfter account confirmation, crypt: No salt parameter wa...Unconfirmed
0%
Task Description

After confirming the newly created account (typing the confirmation code, the passwoard and its confirmation, and clicking the button to continue), the following error appears:

  Notice: crypt(): No salt parameter was specified. You must use a randomly generated salt and a strong hash function to produce a secure hash. in /srv/http/flyspray/includes/class.flyspray.php on line 656 

The account login seems to work normaly.

ServicesGeneralFeature RequestVery LowLowhyperbola branding - add guidelines to packagesUnconfirmed
0%
Task Description

I could not find any regarding using arch or other branded themes. Parabola apparently rebrands some stuff in their libre repository, eg. they have their own parabola-themes-slim package for slim based themes.

https://issues.hyperbola.info/index.php?do=details&task_id=1213&opened=24&status[0]=

ServicesGeneralFreedom IssueVery LowLowHow do I resolve Gmail not receiving emails issue on An...Unconfirmed
0%
Task Description

To resolve External LinkGmail not receiving emails issue on Android phone, one has to follow some steps such as:
1. First, update or check the server.
2. Then go to Settings and click on the Filters and Blocked Address option.
3. After that, turn on the auto-sync option.
4. Next, change the data server settings.
By following the above-mentioned steps, Android users can resolve this issue. Although if the issue still exists then contact our support team.

ServicesGeneralFreedom IssueVery LowLowHow do I resolve Gmail not receiving emails issue on An...Unconfirmed
0%
Task Description

To resolve Gmail not receiving emails issue on Android phone, one has to follow some steps such as:
1. First, update or check the server.
2. Then go to Settings and click on the Filters and Blocked Address option.
3. After that, turn on the auto-sync option.
4. Next, change the data server settings.
By following the above-mentioned steps, Android users can resolve this issue. Although if the issue still exists then contact our support team.

ServicesGeneralFreedom IssueVery LowLowWhy is my Epson printer offline?Unconfirmed
0%
Task Description

Do you ask yourself ‘why is my Epson printer offline’ even when it is turned on? If yes then you are in the right place as we are here to provide you a solution that will fix this issue.
If your printer is linked with an Ethernet cable then ensure that the cable is attached to the router and the printer in a proper manner. If you require an IP address then you can print a network configuration page.
If you are using a USB cable then you should check if it is loose or not. If you think that there is a problem with the USB cable then you can also connect it directly as an alternative to using a hub.
If it is a wireless connection then use the network configuration page to get the IP address and ensure that the printer and the system are both connected to one wifi connection.
https://www.printersupportpro.us/epson-printer-offline

ServicesGeneralFreedom IssueVery LowLowIssue with scanner bringing about Apple Pay to Cash App...Unconfirmed
0%
Task Description

An issue with the scanner is quite possibly the most well-known ones and can be settled in the event that you want to eliminate the Apple Pay to Cash App mistake by utilizing the strategies that you can without much of a stretch find in the assistance community or investigate visiting the technical support locales.

ServicesGeneralFreedom IssueVery LowLowWith cash app customer service, get details why I can’t...Unconfirmed
0%
Task Description

Trying to resolve it? Can’t add cash to cash app For this, avail our cash app technical support for making the issues be rectified instantly. The technical specialists are available around the clock for quick guidance of the cash app users. Users can take help from experts at any time.

ServicesHyperWebBug ReportVery LowMediumThe Mailling list don't workUnconfirmed
0%
Task Description

The Mailling list don't work : https://lists.hyperbola.info//mailman/listinfo/

ServicesHyperWeb IssueBug ReportVery LowLowRSS needs fixingUnconfirmed
0%
Task Description

Seems deleted items reappearing in the Hyperbola feeds since it gives its feed items empty ID string.

ServicesHyperWiki/DokuWikiImplementation RequestMediumMediumLibreboot hardening grub guideUnconfirmed
0%
Task Description

I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,

https://libreboot.org/docs/gnulinux/grub_hardening.html

I wondered if there is anything different that needs to be done to get this part done:

gpg –homedir keys –detach-sign my.initramfs
gpg –homedir keys –detach-sign my.kernel
gpg –homedir keys –detach-sign libreboot_grub.cfg
gpg –homedir keys –detach-sign my.grubtest.cfg

it gives me a bunch of weird errors

ServicesHyperWiki/DokuWikiImplementation RequestVery LowMediumProvide binaries for the Ice*-UXP applications in their...Unconfirmed
0%
Task Description

This would ease their usage on other distros.

ServicesMail Service IssueFeature RequestVery LowLowSupport RFC 3461: Delivery Status Notifications (DSNs)Unconfirmed
0%
Task Description

The RFC 3461 would allow Hyperbola email accounts to request the destination email providers to point out if an email was successfully delivered.

It might not cover all transport failures, but at least has a chance to know in advance whether the message was delivered, discarding the events that happen afterwards (be it to the main inbox or subject to filtering rules such as moving to other folder, marking as spam or deleted after receipt).

ServicesPunBB BrandingBug ReportHighHighForum appearance bugsIn Progress
100%
Task Description

Some forum display errors:

  1. preview button with the orange border.
  1. Error message when logging in gray color making it difficult to read
ServicesPunBB IssueBug ReportVery LowLowhyperbola forum smtp error and profile updateUnconfirmed
0%
Task Description

here i will report 2 issues and one change to make
issues:
1- there is a failed smtp error with post and reply
2- in the forum profile one cant add website with .xyz domain name

the change:
1- with pgp key one would add a short key link just like what was mentioned in here:
https://forums.hyperbola.info/viewtopic.php?pid=2639#p2639

ServicesWiki Page IssueImplementation RequestVery LowMediumAdd notification/subscription capabilities when a page ...Unconfirmed
0%
Task Description

After talking to Emulatorman, we think this would be a nice feature to add to our Hyperwiki to be able to subscribe to the original page in English to help tracking changing to the translated pages.
This implies to add the email notifications to the dokuwiki system

Software DevelopmentGeneralImplementation RequestVery HighCriticalPOWER (ppc64le) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and the Power9-based Talos II promises to be a great architecture example for workstations and servers environments where Hyperbola is focused since is a fully free long-term support distribution.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the POWER architecture (power64le).

NOTE: POWER porting is focused only for Hyperbola GNU/Linux-libre .

Software DevelopmentGeneralImplementation RequestVery HighCriticalARM (aarch and armv7h) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and ARM A7/A53 promises to be a great architecture example for low-power computers, laptops and embedded systems.

NOTE: ARM porting is focused only for HyperbolaBSD .

Software DevelopmentGeneralImplementation RequestDeferCriticalRISC-V (riscv64) porting + multilib supportDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and RISC-V promises to be a great architecture example for low-power computers, laptops and embedded systems, also as ARM architecture replacement.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the RISC-V architecture (riscv64) with multilib support.

NOTE: RISC-V porting is focused only for Hyperbola GNU/Linux-libre .

Showing tasks 451 - 500 of 511 Page 10 of 11<<First - 7 - 8 - 9 - 10 - 11 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing