|
Services | Flyspray Branding | Implementation Request | Medium | Medium | Add Hyperbola branding to HyperTask | In Progress | |
Task Description
Add Hyperbola branding to HyperTask such as HyperWiki and HyperForum for prolixity reasons.
|
|
Software Development | HyperBK | Implementation Request | Very High | Critical | Develop a BSD descendant kernel for HyperbolaBSD | In Progress | |
Task Description
Develop HyperBK (Hyper Berkeley Kernel), a BSD descendant kernel with GPL-compatible licenses preserved, non-compatible ones removed, and new code written under GPL-3 for HyperbolaBSD.
TODO:
Download OpenBSD kernel source code from OpenBSD site → DONE
Download LibertyBSD scripts to deblob and rebrand kernel from their scripts. → DONE
Remove files under non GPL-compatible licenses → DONE
Import code from another BSD systems under GPL-compatible licenses → IN PROGRESS
Write new code under GPL-3 → IN PROGRESS
PATCHING NOTE
When the check concerns kernel, we obviously want to match with HyperbolaBSD.
Example of triplet check: hyperbolabsd)
Example of uname -s check: HyperbolaBSD)
Example of uname -r check: 0.1)
Example of C macro check: defined(__HyperbolaBSD__)
|
|
Installation | General | Implementation Request | High | Critical | To make installation instructions and get use of live I... | Unconfirmed | |
Task Description
I have installed multiple times Hyperbola, 4 times on 4 different notebooks.
What I have noticed is that the live ISO is quite huge in relation to the task that should be done. Namely. the live ISO shall at least contain some first packages, so that they do not need to be downloaded online.
Best would be if the live ISO can be copied straight and that system can run from ISO/DVD without having Internet. At least one simple graphical environment shall be included.
Further, I have noticed that there is only network instructions as HTML file.
I would rather call it installation-instructions.html to make it clear for people what it is. Or simply: INSTALL.html so that people understand what it is.
It says just network.html if I remember well.
Then there is absolutely no point or link or reference to the installation instructions.
Each time I got a network I had to go to either duckduckgo search engine or to hyperbola.info website and then I tried with lynx to find installation instructions.
It is not straight, not quite clearly in open, it is in Wiki, but that is quite hard to find.
We have to put ourselves in the shoes of those in need of free software. Millions of people need free software.
Many of us live in a developed western countries.
Yet millions of people in need of this software live in South America, Africa, Asia, Eastern Europe.
There are millions of students that could advance their study, and that could progress faster with free software.
In those countries Internet is often non-existent, universities may be located in poor network areas, Internet is being fetched by using mobile phones.
So if there is a live distribution, such shall at least contain basic software, which really can fit onto any DVD, and that as such can be copied on the computer without using Internet. Upgrades could be fetched by using Internet.
And there shall be clear reference, link or file about installation. There shall be no need to go to Internet to install the software.
|
|
Software Development | General | Implementation Request | Very High | Critical | POWER (ppc64le) porting | Deferred | |
Task Description
The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .
Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.
For the future of free computing, we need support architectures that do not come with such malware pre-installed, and the Power9-based Talos II promises to be a great architecture example for workstations and servers environments where Hyperbola is focused since is a fully free long-term support distribution.
Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the POWER architecture (power64le).
NOTE: POWER porting is focused only for Hyperbola GNU/Linux-libre .
|
|
Software Development | General | Implementation Request | Very High | Critical | ARM (aarch and armv7h) porting | Deferred | |
Task Description
The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .
Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.
For the future of free computing, we need support architectures that do not come with such malware pre-installed, and ARM A7/A53 promises to be a great architecture example for low-power computers, laptops and embedded systems.
NOTE: ARM porting is focused only for HyperbolaBSD .
|
|
Software Development | General | Implementation Request | Defer | Critical | RISC-V (riscv64) porting + multilib support | Deferred | |
Task Description
The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .
Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.
For the future of free computing, we need support architectures that do not come with such malware pre-installed, and RISC-V promises to be a great architecture example for low-power computers, laptops and embedded systems, also as ARM architecture replacement.
Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the RISC-V architecture (riscv64) with multilib support.
NOTE: RISC-V porting is focused only for Hyperbola GNU/Linux-libre .
|
|
Packages | Any | Bug Report | Very Low | Critical | [system-config-printer] Impossible to print some pdfs (... | Assigned | |
Task Description
Hello,
I’m unable to print some pdfs on my Hyperbola 3.0 system. Some background :
cups is installed, service enabled and working system-config-printer is installed and my printer has been correctly added.
I can print most pdfs and text files but recently with a pdf, it fails to print it.* And system-config-printer returned the following error (see capture) :
Printer "EPSON XP-620-Series" requires the '/usr/lib/cups/filters/epson-escpr-wrapper' but it is not currently installed.
Currently, “epson-escpr-wrapper” is installed but it is in :
/usr/libexec/cups/filters/epson-escpr-wrapper
Looking at source code of system-config-printer, it expects that wrapper to be installed in “/usr/lib/” so I tried to symlink that “epson-escpr-wrapper” to “/usr/lib/cups/filters” but it doesn’t work..
*With a Debian system and the exact same configuration, the “problematic” pdf prints just fine so it is not an issue with the pdf.
|
|
Packages | Stable | Security Issue | Very Low | Critical | [lts-kernel][sec] filter /dev/mem access & restrict acc... | Unconfirmed | |
Task Description
These two options could be enabled :
Kernel hacking → [*] Filter access to /dev/mem [*] Filter I/O access to /dev/mem
Security options → [*] Restrict unprivileged access to the kernel syslog
|
|
Packages | Testing | Bug Report | High | Critical | Runit errors, | Unconfirmed | |
Task Description
/sbin/openrc-run: bad interpreter: No such file or directory
I get this error whenever I try to start dhcpcd with sv /etc/runit/
And for sndiod I get this doing the same guide,
warning: sndiod: unable to open supervise/ok: file does not exist
Although rather ironically, If I type sndiod or dhcpcd into root, it works just fine.
Maybe its an FHS issue or possibly, I am screwing up? I am not sure. Feedback is welcome.
This is what I did:
=⇒ Add a service:
ln -s /etc/sv/<service> /var/service
==> Start/stop/restart a service:
sv <start/stop/restart> <service>
more or less, I used this guide.
|
|
Software Development | General | Bug Report | Very High | Critical | [Hyperbola GNU/Linux-libre 0.4] Reworking xenocara and ... | In Progress | |
Task Description
Within the concurrent version of xenocara for version 0.4 there is a problem in vesa, generating the error-message "V_BIOS address 0x0 out of range". It is a known old bug that was fixed when D-Bus arrived by default.
This issue is oriented onto to document the steps to test further solutions and rework the x-server.
|
|
Software Development | General | Bug Report | Medium | Critical | [xenocara] Server is not able to be started via xdm | Unconfirmed | |
Task Description
With the newest package-update the xserver xenocara has missing dependencies towards adobe-fonts and twm.
|
|
Packages | Any | Feature Request | Very High | High | [bzr] needs OpenRC init script (bzr serve) | Assigned | |
Task Description
Description:
Additional info:
Note: needs a provide: bazaar
Steps to reproduce:
|
|
Packages | Any | Feature Request | Very High | High | [mercurial] needs OpenRC init scripts (hg serve and chg... | Assigned | |
Task Description
Description:
Additional info:
Note: needs a provide: hg
Steps to reproduce:
|
|
Packages | Any | Implementation Request | Very High | High | [murmur-headless] add a Murmur package capable of worki... | In Progress | |
Task Description
Description:
Add new a Murmur package capable of working without a graphical user interface. It’s common on servers and embedded devices that requires only interfaces like network (eg. SSH) or serial port to handle services.
Additional info:
Steps to reproduce:
|
|
Packages | Any | Implementation Request | Very High | High | [asterisk-headless] add an Asterisk package capable of ... | In Progress | |
Task Description
Description:
Add an Asterisk package capable of working without a graphical user interface. It’s common on servers and embedded devices that requires only interfaces like network (eg. SSH) or serial port to handle services.
Additional info:
Steps to reproduce:
|
|
Packages | Any | Bug Report | Medium | High | [notmuch-mutt] missing requirement | Researching | |
Task Description
Description: notmuch-mutt fails to compile without perl-mail-message which is missing in Hyperbola
Steps to reproduce: Install notmuch-mutt and try `notmuch-mutt` at the command line. Then install `perl-mail-message` from Arch and try again.
|
|
Packages | Any | Implementation Request | Very Low | High | Add MPTCP (MultiPath TCP) to Hyperbola | Unconfirmed | |
Task Description
https://aur.archlinux.org/packages/linux-mptcp/
Kernel Patch for 4.9 : http://multipath-tcp.org/patches/mptcp-v4.9-c88d1d56809e.patch
Compile : https://multipath-tcp.org/pmwiki.php/Users/DoItYourself
|
|
Packages | Stable | Bug Report | Very Low | High | [vlc] DVB : cache_block stream error: cannot pre fill b... | Unconfirmed | |
Task Description
Current VLC version (3.0.4-3.hyperbola1.backports1) fails to play DVB stream using a RTL2832 usb dongle.
I start the playlist like this :
vlc channels.conf
but it returns the following error :
cache_block stream error: cannot pre fill buffer
Also, it asks the user to be in “video” group to access DVB device, this was not needed before with Hyperbola 0.2.9. User being in “wheel” was enough. Anyway, even after adding my user to video group, it still fails with “cache_block stream error: cannot pre fill buffer”
This is not an issue with my DVB adapter or driver. rtl2832 is correctly loaded. And I can play the channels.conf playlist just fine with “mpv” or “mplayer”. Also, the channels.conf used works just fine with a more recent version of VLC on an other system (Manjaro) so something is broken with the current VLC used.
Maybe a package bump would fix the issue.
|
|
Packages | Any | Bug Report | Medium | Medium | [rxvt-unicode] rc-status command print "bug" table | Researching | |
Task Description
If you do a command line rc-status on urxvt terminal, the name of the column of services are hidden. You will only see the status columns. Example:
Runlevel: default
started ]
started ]
started ]
started ]
started 00:36:20 (0) ]
started 00:36:20 (0) ]
started 00:36:20 (0) ]
started 00:36:20 (0) ]
Dynamic Runlevel: hotplugged
Dynamic Runlevel: needed/wanted
started ]
started ]
started ]d
Dynamic Runlevel: manual
|
|
Services | Wiki Page Issue | Implementation Request | Very Low | Medium | Add notification/subscription capabilities when a page ... | Unconfirmed | |
Task Description
After talking to Emulatorman, we think this would be a nice feature to add to our Hyperwiki to be able to subscribe to the original page in English to help tracking changing to the translated pages. This implies to add the email notifications to the dokuwiki system
|
|
Packages | Any | Bug Report | Low | Medium | [cryptsetup] when dmcrypt start, the "/" filesystem, m... | Assigned | |
Task Description
When dmcrypt service start, the “/” filesystem is remounted, mtab is updated and bootmisc is recording the login users, by waiting time scheduling:
* root: waiting for dmcrypt (50 seconds)
* root: timed out waiting for dmcrypt
* Remounting root filesystem read/write ...
* Remounting filesystems ...
* mtab: waiting for dmcrypt (50 seconds)
* mtab: timed out waiting for dmcrypt
* Updating /etc/mtab ...
* Creating mtab symbolic link
* bootmisc: waiting to dmcrypt (50 seconds)
* bootmisc: timed out waiting for dmcrypt
* Creating user login records ...
These features on dmcrypt service are useless and these lines print above filesystem passphrase order (the printed line), those ones break printed console and print the pressed keyboard digit when I’m setting up password. Sometimes this breaks services startup, and I need press “enter” consecutively to allow run the services.
|
|
Packages | Any | Bug Report | Low | Medium | [cryptsetup] can't umount luks filesystem on reboot/shu... | Assigned | |
Task Description
dmcrypt service can’t umount luks filesystem on reboot/shutdown, device or resource busy:
* Removing dm-crypt mappings
* foobar-pv
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
Device foobar-pv is still in use [ !! ]
|
|
Packages | Any | Feature Request | Medium | Medium | [DCPT500W] possible integration of drivers to cups on P... | Assigned | |
Task Description
Hi guys, I have ever run into a Brother brand printer model DCPT500W[0], and I have seen that the source code for the drivers under GPLv3 license is available.
I also see that there is a file brother_dcpt500w_printer_en.ppd, which is important for cups, which is why it may be necessary to integrate it into the cups, as long as the drivers are Libre.
[0]:https://download.brother.com/welcome/dlf101963/dcpt500w_cupswrapper_GPL_source_3.0.2-0.tar.gz
|
|
Packages | Stable | Bug Report | Very Low | Medium | [nfs-utils] missing idmapd.conf | Unconfirmed | |
Task Description
Hello,
When mounting an NFS share, I get a warning about missing idmpad.conf
rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
4341: * Stopping idmapd ...
Debian includes a default config file for idmap :
[General]
Verbosity = 0
Pipefs-Directory = /run/rpc_pipefs
# set your own domain here, if id differs from FQDN minus hostname
# Domain = localdomain
[Mapping]
Nobody-User = nobody
Nobody-Group = nogroup
|
|
Software Development | Iceweasel-UXP | Backport Request | Very Low | Medium | Request browser add-on: New Tab Tools | Unconfirmed | |
Task Description
Name: New Tab Tools Version: 81 (compatible Firefox version 52) Source code: Github Description: Customize Firefox’s. Tabs Page
https://github.com/darktrojan/newtabtools
https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/
|
|
Packages | Any | Security Issue | Very Low | Medium | [qemu] Multiple CVE | Unconfirmed | |
|
|
Packages | Stable | Bug Report | Very Low | Medium | [fail2ban] uses old /usr/bin/sendmail location when it ... | Unconfirmed | |
|
|
Packages | Any | Implementation Request | Very Low | Medium | [SPF][postfix] implement pypolicyd-spf and postfix-poli... | Unconfirmed | |
|
|
Services | HyperWeb | Bug Report | Very Low | Medium | The Mailling list don't work | Unconfirmed | |
|
|
Software Development | Icedove-UXP | Bug Report | Very Low | Medium | CardBook addon make icedove crash wen adding or editing... | Unconfirmed | |
|
|
Software Development | chroot-nspawn | Bug Report | Medium | Medium | [chroot-nspawn] Create mount points if mountpoint exit ... | Unconfirmed | |
|
|
Packages | Testing | Feature Request | Very Low | Medium | [Hyperbola GNU/Linux-libre 0.4] [xorg-xdm] Replace the ... | Unconfirmed | |
|
|
Software Development | HyperTools | Implementation Request | Low | Low | [hypertools] create libretools replacement for Hyperbol... | Deferred | |
|
|
Packages | Any | Implementation Request | Very Low | Low | [ttf-font-awesome] add ttf-font-awesome font | Unconfirmed | |
|
|
Packages | Any | Implementation Request | Very Low | Low | [awesome-terminal-fonts] add package | Unconfirmed | |
|
|
Services | HyperWeb Issue | Bug Report | Very Low | Low | RSS needs fixing | Unconfirmed | |
|
|
Software Development | Iceweasel-UXP | Implementation Request | Defer | Low | Swiftweasel-UXP theme for Iceweasel-UXP | Unconfirmed | |
|
|
Software Development | Icedove-UXP | Implementation Request | Defer | Low | Swiftdove-UXP theme for Icedove-UXP | Unconfirmed | |
|
|
Services | General | Feature Request | Very Low | Low | hyperbola branding - add guidelines to packages | Unconfirmed | |
|
|
Services | Flyspray Issue | Security Issue | Very Low | Low | After account confirmation, crypt: No salt parameter wa... | Unconfirmed | |
|
|
Services | Mail Service Issue | Feature Request | Very Low | Low | Support RFC 3461: Delivery Status Notifications (DSNs) | Unconfirmed | |
|
|
Software Development | General | Feature Request | Medium | Low | [Website] Rework for the onion-page | Unconfirmed | |
|
|
Services | HyperWiki/DokuWiki | Bug Report | Medium | Low | Wiki search feature is broken, taskrunner has stopped t... | In Progress | |
|
|
Packages | Any | Feature Request | Very Low | Very Low | [ttf-iosevka] add Iosevka font | Deferred | |
|
|
Software Development | Iceweasel-UXP | Backport Request | Very Low | Very Low | Request browser add-on: FireGestures | Unconfirmed | |
|
|
Packages | Stable | Bug Report | Very Low | Very Low | [spamassassin] has different directory permissions than... | Deferred | |
|
|
Packages | Stable | Bug Report | Very Low | Very Low | [postfix] has different directory permissions than 'fil... | Deferred | |
|
|
Packages | Stable | Bug Report | Very Low | Very Low | [fail2ban] update dovecot failregex to support verbose ... | Unconfirmed | |
|