|
Services | Mail Service Issue | Bug Report | Very High | Critical | hyperbola.info having incorrect SPF records (or usage o ... | Closed | |
Task Description
As reported here: https://forums.hyperbola.info/viewtopic.php?id=110
the domain Hyperbola.info is using such SPF record that does not allow the IP address 185.26.126.154 to send emails from bissen.hyperbola.info as seen on: https://mxtoolbox.com/SuperTool.aspx?action=spf%3ahyperbola.info&run=toolpage
Correct the SPF record as to enable deliveries of emails.
This is negatively impacting Hyperbola project in public mail servers which may consider hyperbola.info domain as domain sending spam.
Jun 10 11:12:41 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:14:57 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:16:02 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:16:50 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:17:28 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:18:17 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:19:12 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:21:01 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:21:37 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:22:22 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:22:36 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:22:54 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:23:09 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
|
|
Packages | Testing | Bug Report | Medium | Medium | [emacs] crush after sway | Closed | |
Task Description
I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:
1. Run sway
2. Exit sway or killall sway
3. Try running emacs on console, there will be crush
4. log out, log in, and emacs will work on console again
Yet it should not crush.
|
|
Packages | Any | Bug Report | Medium | Critical | [wesnoth]: prevents upgrade of Hyperbola, colliding fil ... | Closed | |
Task Description
Description:
I have tried to upgrade hyperbola.
Critical upgrades cannot be installed when wesnoth is installed, there are conflicting files
Steps to reproduce:
:: Proceed with installation? [Y/n] y
:: Retrieving packages...
arch-keyring-201808... 1605.2 KiB 617K/s 00:03 [#########] 100%
hyperbola-keyring-2... 215.9 KiB 635K/s 00:00 [#########] 100%
linux-libre-lts-4.9... 59.6 MiB 749K/s 01:22 [#########] 100%
openvpn-2.4.6-1.hyp... 402.2 KiB 1149K/s 00:00 [#########] 100%
iceweasel-uxp-52.9.... 39.8 MiB 839K/s 00:49 [#########] 100%
libgdm-3.24.1-1.hyp... 57.3 KiB 1912K/s 00:00 [#########] 100%
ntp-4.2.8.p11-2.hyp... 1798.4 KiB 833K/s 00:02 [#########] 100%
sddm-0.14.0-2.hyper... 3.2 MiB 770K/s 00:04 [#########] 100%
lxdm-0.5.3-4.hyperb... 98.4 KiB 984K/s 00:00 [#########] 100%
tp_smapi-lts-0.43-1... 26.6 KiB 2.60M/s 00:00 [#########] 100%
wesnoth-data-1.14.4... 395.1 MiB 745K/s 09:03 [#########] 100%
wesnoth-1.14.4-1.hy... 5.5 MiB 616K/s 00:09 [#########] 100%
(12/12) checking keys in keyring [#########] 100%
(12/12) checking package integrity [#########] 100%
(12/12) loading package files [#########] 100%
(12/12) checking for file conflicts [#########] 100%
error: failed to commit transaction (conflicting files)
/usr/share/icons/hicolor/128x128/apps/wesnoth-icon.png exists in both 'wesnoth-data' and 'wesnoth'
/usr/share/icons/hicolor/16x16/apps/wesnoth-icon.png exists in both 'wesnoth-data' and 'wesnoth'
/usr/share/icons/hicolor/256x256/apps/wesnoth-icon.png exists in both 'wesnoth-data' and 'wesnoth'
/usr/share/icons/hicolor/32x32/apps/wesnoth-icon.png exists in both 'wesnoth-data' and 'wesnoth'
/usr/share/icons/hicolor/512x512/apps/wesnoth-icon.png exists in both 'wesnoth-data' and 'wesnoth'
/usr/share/icons/hicolor/64x64/apps/wesnoth-icon.png exists in both 'wesnoth-data' and 'wesnoth'
/usr/share/metainfo/wesnoth.appdata.xml exists in both 'wesnoth-data' and 'wesnoth'
Errors occurred, no packages were upgraded.
|
|
Packages | Stable | Bug Report | Medium | High | opensmtpd: permission problems | Closed | |
Task Description
Description:
cat msg | /usr/sbin/sendmail – sendmail: No such file or directorycannot create temporary file /var/spool/smtpd/offline/1572544775.XXXXIqNsFX
Additional info:
* package version: 6.4.2p1-1.hyperbola2.backports1
It is same problem as here:
https://github.com/OpenSMTPD/OpenSMTPD/issues/839
I could solve it with:
sudo chmod g+s /usr/sbin/smtpctl
sudo chmod g+s /usr/sbin/smtpctl
and then
sudo rc-service smtpd start
Even though I think I should not need to start it to use only sendmail.
|
|
Packages | Any | Bug Report | Very Low | Low | [gimp] [gegl] Module '/usr/lib/gegl-0.3/lens-correct.so ... | Closed | |
Task Description
admin→ gimp IMG_20170909_153350828.jpg
GEGL-Message: Module ‘/usr/lib/gegl-0.3/lens-correct.so’ load error: liblensfun.so.1: cannot open shared object file: No such file or directory
GEGL-Message: Module ‘/usr/lib/gegl-0.3/matting-levin.so’ load error: libumfpack.so.5: cannot open shared object file: No such file or directory
(gimp:12519): GLib-GObject-WARNING **: g_object_set_valist: object class ‘GeglConfig’ has no property named ‘cache-size’
Those are errors I get when running Gimp.
|
|
Packages | Any | Bug Report | Very Low | Low | [lbreakout2]: Write permission for '/var/games/lbreakou ... | Closed | |
Task Description
Description:
This game cannot start:
admin→ lbreakout2
LBreakout2 2.6.5
Copyright 2001-2011 Michael Speck
Published under GNU GPL — Looking up data in: /usr/share/lbreakout2
Looking up highscores in: /var/games/lbreakout2
Looking up custom levels in: /home/admin/.lgames/lbreakout2-levels
Loading theme ‘AbsoluteB’ Write permission for ‘/var/games/lbreakout2/lbreakout2.hscr’ denied.
Unable to access highscore chart in ‘/var/games/lbreakout2’.
Trying to use config directory ‘/home/admin/.lgames’.
Saving highscore chart in: /home/admin/.lgames
Client finalized
GUI finalized
Audio finalized
STK finalized
SDL finalized
yet nothing is visible (just black screen and mouse)
and permissions are incorrect.
|
|
Packages | Any | Bug Report | Very Low | High | Desite "noauto" specified in /etc/fstab all devices get ... | Closed | |
Task Description
Description:
I have tried all combinations, but despite “noauto” specified in /etc/fstab all devices get mounted at boot.
Who can help me, not to mount a device during boot?
|
|
Services | Wiki Page Issue | Bug Report | Very Low | High | HTML design on Wiki not readable | Closed | |
Task Description
The wiki pages look really too narrow and not readable on even half a screen of the laptop.
|
|
Packages | Any | Bug Report | Very Low | Critical | [apache]: cannot start if NetworkManager is not started | Closed | |
Task Description
Description:
Apache web server shall be running with or without the external network, and without NetworkManager.
rc-service httpd start
will give the message that NetworkManager must be started first, and will not start apache web server. I cannot find in which file is that written.
Steps to reproduce:
1. Disconnect network. Start computer.
2. Try to start apache with above command.
That makes no sense, as Apache can run on local network without NetworkManager and it is not written in the description.
|
|
Packages | Any | Bug Report | Very Low | High | error: extract: not overwriting dir with file /usr/loca ... | Closed | |
Task Description
Description:
after upgrade there are errors that shall not be there. I cannot know why.
admin-> upgrade-hyperbola
:: Synchronizing package databases...
core 186.6 KiB 283K/s 00:01 [###############################] 100%
extra 1918.8 KiB 259K/s 00:07 [###############################] 100%
community 4.1 MiB 217K/s 00:19 [###############################] 100%
DEB_Arch_Extra 4.2 KiB 0.00B/s 00:00 [###############################] 100%
DEB_Arch_Extra.sig 280.0 B 0.00B/s 00:00 [###############################] 100%
:: Starting full system upgrade...
warning: elinks: local (0.13-18) is newer than community (0.12pre6-1.hyperbola1)
resolving dependencies...
looking for conflicting packages...
Packages (5) filesystem-2017.03-2.hyperbola10.4 icedove-uxp-52.9.20181107-1
iceweasel-uxp-52.9.20181107-1 licenses-20140629-2.hyperbola3
pacman-mirrorlist-20181031-1.hyperbola1.1
Total Download Size: 79.91 MiB
Total Installed Size: 226.65 MiB
Net Upgrade Size: 0.26 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages...
filesystem-2017.03-2.hyperb... 13.0 KiB 0.00B/s 00:00 [###############################] 100%
licenses-20140629-2.hyperbo... 68.4 KiB 171K/s 00:00 [###############################] 100%
pacman-mirrorlist-20181031-... 5.6 KiB 0.00B/s 00:00 [###############################] 100%
icedove-uxp-52.9.20181107-1... 37.6 MiB 403K/s 00:06 [############################---] 93 icedove-uxp-52.9.20181107-1... 37.9 MiB 41-----------------------------] iceweasel-uxp-52.9.20181107... 3.8 MiB 867K/s 00:42 [##-----------------------------] iceweasel-uxp-52.9.20181107... 3.8 MiB 600K/s 01:01 [##----------------------------- iceweasel-uxp-52.9.20181107... 4.0 MiB 773K/s 00:47 [###----------------------------] iceweasel-uxp-52.9.20181107... 4.1 MiB 702K/s 00:51 [###----------------------------] iceweasel-uxp-52.9.20181107... 39.8 MiB 212K/s 03:12 [###############################] 100%
(5/5) checking keys in keyring [###############################] 100%
(5/5) checking package integrity [###############################] 100%
(5/5) loading package files [###############################] 100%
(5/5) checking for file conflicts [###############################] 100%
(5/5) checking available disk space [###############################] 100%
:: Processing package changes...
(1/5) upgrading filesystem [###############################] 100%
error: extract: not overwriting dir with file /usr/local/share/man
error: problem occurred while upgrading filesystem
error: could not commit transaction
error: failed to commit transaction (transaction aborted)
Errors occurred, no packages were upgraded.
|
|
Packages | Any | Bug Report | Very Low | Low | marble-qt: doesn't look like a valid Marble plugin: "/ ... | Closed | |
Task Description
Description:
$ marble-qt –latlone=0.5,6.5
Ignoring to load the following file since it doesn’t look like a valid Marble plugin: “/usr/lib/marble/plugins/libWlocatePositionProviderPlugin.so” Reason: “Cannot load library /usr/lib/marble/plugins/libWlocatePositionProviderPlugin.so: (libwlocate.so: cannot open shared object file: No such file or directory)”
When package libwlocate is installed, it is not showing this error.
Shall that package be dependency?
|
|
Packages | Any | Bug Report | Very Low | High | groff: package not built with URW fonts properly or suc ... | Closed | |
Task Description
Description:
groff is typesetting system similar to TeX/LaTeX however, it is very small and very usable. It is not built properly with URW fonts, or such are missing, I cannot know all details. Overall groff package is basically somehow broken.
It shall depend on proper fonts, and such fonts should already be built, including their Unicode versions.
Package is only partially built.
|
|
Packages | Stable | Bug Report | Very Low | Low | Chemical uknown media types | Closed | |
Task Description
I do not know how to solve this. Some of packages is causing this problem. I do not know which one.
Description:
(4/4) Updating the MIME type database...
Unknown media type in type ‘chemical/x-alchemy’ Unknown media type in type ‘chemical/x-cache’ Unknown media type in type ‘chemical/x-cactvs-ascii’ Unknown media type in type ‘chemical/x-cactvs-binary’ Unknown media type in type ‘chemical/x-cactvs-table’ Unknown media type in type ‘chemical/x-cdx’ Unknown media type in type ‘chemical/x-cdxml’ Unknown media type in type ‘chemical/x-chem3d’ Unknown media type in type ‘chemical/x-cif’ Unknown media type in type ‘chemical/x-cml’ Unknown media type in type ‘chemical/x-daylight-smiles’ Unknown media type in type ‘chemical/x-dmol’ Unknown media type in type ‘chemical/x-gamess-input’ Unknown media type in type ‘chemical/x-gamess-output’ Unknown media type in type ‘chemical/x-gaussian-input’ Unknown media type in type ‘chemical/x-gaussian-log’ Unknown media type in type ‘chemical/x-genbank’ Unknown media type in type ‘chemical/x-gulp’ Unknown media type in type ‘chemical/x-hin’ Unknown media type in type ‘chemical/x-inchi’ Unknown media type in type ‘chemical/x-inchi-xml’ Unknown media type in type ‘chemical/x-jcamp-dx’ Unknown media type in type ‘chemical/x-macromodel-input’ Unknown media type in type ‘chemical/x-mdl-molfile’ Unknown media type in type ‘chemical/x-mdl-rdfile’ Unknown media type in type ‘chemical/x-mdl-rxnfile’ Unknown media type in type ‘chemical/x-mdl-sdfile’ Unknown media type in type ‘chemical/x-mdl-tgf’ Unknown media type in type ‘chemical/x-mmcif’ Unknown media type in type ‘chemical/x-mol2’ Unknown media type in type ‘chemical/x-mopac-graph’ Unknown media type in type ‘chemical/x-mopac-input’ Unknown media type in type ‘chemical/x-mopac-out’ Unknown media type in type ‘chemical/x-msi-car’ Unknown media type in type ‘chemical/x-msi-hessian’ Unknown media type in type ‘chemical/x-msi-mdf’ Unknown media type in type ‘chemical/x-msi-msi’ Unknown media type in type ‘chemical/x-ncbi-asn1’ Unknown media type in type ‘chemical/x-ncbi-asn1-binary’ Unknown media type in type ‘chemical/x-ncbi-asn1-xml’ Unknown media type in type ‘chemical/x-pdb’ Unknown media type in type ‘chemical/x-shelx’ Unknown media type in type ‘chemical/x-vmd’ Unknown media type in type ‘chemical/x-xyz’ Unknown media type in type ‘all/all’ Unknown media type in type ‘all/allfiles’
|
|
Packages | Stable | Bug Report | Very Low | Low | [autofs]: default configuration is /etc/auto.master ins ... | Closed | |
Task Description
Description:
default configuration is /etc/auto.master instead of /etc/autofs/auto.master
admin→ sudo /usr/bin/automount -v -f -p /run/autofs.pid
Starting automounter version 5.1.2, master map /etc/auto.master
using kernel protocol version 5.02
lookup(file): file map /etc/auto.master missing or not readable
no mounts in table
|
|
Packages | Any | Bug Report | Defer | High | [texlive-most] cannot export LaTeX - input csr10' fail ... | Closed | |
Task Description
I was using GNU Emacs, and tried to export LaTeX file or make a PDF. It seems that texlive package is broken, some fonts are missing.
The group named texlive-most cannot be properly installed.
admin→ pacsearch texlive
extra/texlive-bibtexextra 2016.43765-1 (texlive-most)
TeX Live - Additional BibTeX styles and bibliography databases
extra/texlive-bin 2016.41290-12.hyperbola1 [installed]
TeX Live binaries (Hyperbola rebranded)
extra/texlive-core 2016.43757-1.hyperbola2 (texlive-most) [installed]
TeX Live core distribution, without nonfree add-on packages (Hyperbola rebranded)
extra/texlive-fontsextra 2016.43763-1.hyperbola2 (texlive-most) [installed]
TeX Live - all sorts of extra fonts, without nonfree add-on packages
extra/texlive-formatsextra 2016.41438-3 (texlive-most) [installed]
TeX Live - collection of extra TeX 'formats'
extra/texlive-games 2016.43415-1 (texlive-most)
TeX Live - Setups for typesetting various board games, including chess
extra/texlive-genericextra 2016.43605-1 (texlive-most) [installed]
TeX Live - mixed bag of generic macro packages and fonts
extra/texlive-htmlxml 2016.43769-1 (texlive-most)
TeX Live - Packages to convert LaTeX to XML/HTML, and typeset XML/SGML
extra/texlive-humanities 2016.43711-1 (texlive-most)
TeX Live - LaTeX packages for law, linguistics, social sciences, and humanities
extra/texlive-langchinese 2016.43669-1 (texlive-lang)
TeX Live - Fonts and macro packages to typeset Chinese texts
extra/texlive-langcjk 2014.0-1
TeX Live - CJK (Chinese, Japanese, Korean) metapackage
extra/texlive-langcyrillic 2016.43417-1 (texlive-lang)
TeX Live - Fonts and macro packages to typeset Cyrillic texts
extra/texlive-langextra 2016.43739-1 (texlive-lang)
TeX Live - Bundle of all extra language support
extra/texlive-langgreek 2016.43222-1 (texlive-lang)
TeX Live - Fonts and support for typesetting Greek
extra/texlive-langjapanese 2016.43741-1 (texlive-lang)
TeX Live - Fonts and macro packages to typeset Japanese texts
extra/texlive-langkorean 2016.43130-1 (texlive-lang)
TeX Live - Fonts and macro packages to typeset Korean texts
extra/texlive-latexextra 2016.43768-1.hyperbola2 (texlive-most) [installed]
TeX Live - Large collection of add-on packages for LaTeX, without nonfree add-on packages
extra/texlive-music 2016.43375-1 (texlive-most)
TeX Live - Music typesetting packages
extra/texlive-pictures 2016.43767-1 (texlive-most) [installed]
TeX Live - Packages for drawings graphics
extra/texlive-plainextra 2016.43137-1 (texlive-most) [installed]
TeX Live - A collection of add-on packages and macros for plain TeX
extra/texlive-pstricks 2016.43710-1 (texlive-most) [installed]
TeX Live - Additional PSTricks packages
extra/texlive-publishers 2016.43764-1 (texlive-most)
TeX Live - LaTeX classes and packages for specific publishers
extra/texlive-science 2016.43747-1 (texlive-most)
TeX Live - Typesetting for mathematics, natural and computer sciences
[~]
admin→ sudo pacman -S texlive-most
:: There are 15 members in group texlive-most:
:: Repository extra
1) texlive-bibtexextra 2) texlive-core 3) texlive-fontsextra 4) texlive-formatsextra 5) texlive-games 6) texlive-genericextra
7) texlive-htmlxml 8) texlive-humanities 9) texlive-latexextra 10) texlive-music 11) texlive-pictures 12) texlive-plainextra
13) texlive-pstricks 14) texlive-publishers 15) texlive-science
Enter a selection (default=all):
warning: texlive-core-2016.43757-1.hyperbola2 is up to date -- reinstalling
warning: texlive-fontsextra-2016.43763-1.hyperbola2 is up to date -- reinstalling
warning: texlive-formatsextra-2016.41438-3 is up to date -- reinstalling
warning: texlive-genericextra-2016.43605-1 is up to date -- reinstalling
warning: texlive-latexextra-2016.43768-1.hyperbola2 is up to date -- reinstalling
warning: texlive-pictures-2016.43767-1 is up to date -- reinstalling
warning: texlive-plainextra-2016.43137-1 is up to date -- reinstalling
warning: texlive-pstricks-2016.43710-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Packages (15) texlive-bibtexextra-2016.43765-1 texlive-core-2016.43757-1.hyperbola2 texlive-fontsextra-2016.43763-1.hyperbola2
texlive-formatsextra-2016.41438-3 texlive-games-2016.43415-1 texlive-genericextra-2016.43605-1
texlive-htmlxml-2016.43769-1 texlive-humanities-2016.43711-1 texlive-latexextra-2016.43768-1.hyperbola2
texlive-music-2016.43375-1 texlive-pictures-2016.43767-1 texlive-plainextra-2016.43137-1 texlive-pstricks-2016.43710-1
texlive-publishers-2016.43764-1 texlive-science-2016.43747-1
Total Download Size: 27.66 MiB
Total Installed Size: 1300.90 MiB
Net Upgrade Size: 110.88 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages...
texlive-bibtexextra-2016.43765-1-any 1541.4 KiB 275K/s 00:06 [###############################################] 100%
texlive-games-2016.43415-1-any 416.5 KiB 356K/s 00:01 [###############################################] 100%
texlive-htmlxml-2016.43769-1-any 1197.6 KiB 300K/s 00:04 [###############################################] 100%
texlive-humanities-2016.43711-1-any 299.0 KiB 664K/s 00:00 [###############################################] 100%
texlive-music-2016.43375-1-any 12.2 MiB 398K/s 00:31 [###############################################] 100%
texlive-publishers-2016.43764-1-any 9.2 MiB 471K/s 00:20 [###############################################] 100%
texlive-science-2016.43747-1-any 2.9 MiB 376K/s 00:08 [###############################################] 100%
(15/15) checking keys in keyring [###############################################] 100%
(15/15) checking package integrity [###############################################] 100%
(15/15) loading package files [###############################################] 100%
(15/15) checking for file conflicts [###############################################] 100%
(15/15) checking available disk space [###############################################] 100%
:: Processing package changes...
( 1/15) reinstalling texlive-core [###############################################] 100%
>>> updmap custom entries should go into /etc/texmf/web2c/updmap-local.cfg
>>> fmtutil custom entries should go into /etc/texmf/web2c/fmtutil-local.cnf
( 2/15) installing texlive-bibtexextra [###############################################] 100%
( 3/15) reinstalling texlive-fontsextra [###############################################] 100%
( 4/15) reinstalling texlive-formatsextra [###############################################] 100%
( 5/15) installing texlive-games [###############################################] 100%
( 6/15) reinstalling texlive-genericextra [###############################################] 100%
( 7/15) installing texlive-htmlxml [###############################################] 100%
( 8/15) reinstalling texlive-latexextra [###############################################] 100%
( 9/15) installing texlive-humanities [###############################################] 100%
Optional dependencies for texlive-humanities
texlive-pictures: for package qtree [installed]
(10/15) installing texlive-music [###############################################] 100%
Optional dependencies for texlive-music
python2: for scripts from the lilyglyphs packages [installed]
(11/15) reinstalling texlive-pictures [###############################################] 100%
(12/15) reinstalling texlive-plainextra [###############################################] 100%
(13/15) reinstalling texlive-pstricks [###############################################] 100%
(14/15) installing texlive-publishers [###############################################] 100%
(15/15) installing texlive-science [###############################################] 100%
Optional dependencies for texlive-science
python2-pygments: for pygmentex
:: Running post-transaction hooks...
(1/3) Updating TeXLive filename database...
(2/3) Updating TeXLive format files...
kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)
kpathsea: Running mktexmf csr10
! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.
kpathsea: Running mktextfm ecrm1000
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)
kpathsea: Running mktexmf ecrm1000
! I can't find file `ecrm1000'.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000
Please type another input file name
! Emergency stop.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000
Transcript written on mfput.log.
grep: ecrm1000.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000' failed to make ecrm1000.tfm.
kpathsea: Appending font creation commands to missfont.log.
kpathsea: Running mktextfm ecrm1000
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)
kpathsea: Running mktexmf ecrm1000
! I can't find file `ecrm1000'.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000
Please type another input file name
! Emergency stop.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000
Transcript written on mfput.log.
grep: ecrm1000.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000' failed to make ecrm1000.tfm.
kpathsea: Appending font creation commands to missfont.log.
kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)
kpathsea: Running mktexmf csr10
! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.
kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)
kpathsea: Running mktexmf csr10
! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.
fmtutil [ERROR]: running `pdftex -ini -jobname=utf8mex -progname=utf8mex -enc *utf8mex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [WARNING]: inifile pdfmex.ini for pdfmex/pdftex not found.
fmtutil [ERROR]: running `pdftex -ini -jobname=csplain -progname=csplain -etex -enc csplain-utf8.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini -jobname=pdfjadetex -progname=pdfjadetex *pdfjadetex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini -jobname=jadetex -progname=jadetex *jadetex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [WARNING]: inifile mex.ini for mex/pdftex not found.
fmtutil [ERROR]: running `xetex -ini -jobname=pdfcsplain -progname=pdfcsplain -etex csplain.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini -jobname=pdfcsplain -progname=pdfcsplain -etex -enc csplain-utf8.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `luatex -ini -jobname=pdfcsplain -progname=pdfcsplain -etex csplain.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
error: command failed to execute correctly
(3/3) Updating TeXLive font maps...
[~]
a
|
|
Packages | Any | Bug Report | Defer | Low | [texlive-most] Cannot remove from system | Closed | |
Task Description
admin-> sudo pacman -R texlive-most
checking dependencies...
:: ghostscript optionally requires texlive-core: needed for dvipdf
:: inkscape optionally requires texlive-core: latex formulas
Packages (15) texlive-bibtexextra-2016.43765-1 texlive-core-2016.43757-1.hyperbola2 texlive-fontsextra-2016.43763-1.hyperbola2 texlive-formatsextra-2016.41438-3 texlive-games-2016.43415-1
texlive-genericextra-2016.43605-1 texlive-htmlxml-2016.43769-1 texlive-humanities-2016.43711-1 texlive-latexextra-2016.43768-1.hyperbola2 texlive-music-2016.43375-1
texlive-pictures-2016.43767-1 texlive-plainextra-2016.43137-1 texlive-pstricks-2016.43710-1 texlive-publishers-2016.43764-1 texlive-science-2016.43747-1
Total Removed Size: 1300.90 MiB
:: Do you want to remove these packages? [Y/n] y
:: Processing package changes...
( 1/15) removing texlive-science [######################################################################] 100%
( 2/15) removing texlive-publishers [######################################################################] 100%
( 3/15) removing texlive-pstricks [######################################################################] 100%
( 4/15) removing texlive-plainextra [######################################################################] 100%
( 5/15) removing texlive-pictures [######################################################################] 100%
( 6/15) removing texlive-music [######################################################################] 100%
( 7/15) removing texlive-humanities [######################################################################] 100%
( 8/15) removing texlive-latexextra [######################################################################] 100%
( 9/15) removing texlive-htmlxml [######################################################################] 100%
(10/15) removing texlive-genericextra [######################################################################] 100%
(11/15) removing texlive-games [######################################################################] 100%
(12/15) removing texlive-formatsextra [######################################################################] 100%
(13/15) removing texlive-fontsextra [######################################################################] 100%
(14/15) removing texlive-bibtexextra [######################################################################] 100%
(15/15) removing texlive-core [######################################################################] 100%
warning: /etc/texmf/web2c/fmtutil.cnf saved as /etc/texmf/web2c/fmtutil.cnf.pacsave
:: Running post-transaction hooks...
(1/3) Updating TeXLive filename database...
warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
/usr/share/libalpm/scripts/mktexlsr: line 4: /usr/bin/mtxrun: No such file or directory
(2/3) Updating TeXLive format files...
cp: cannot stat 'usr/share/texmf-dist/web2c/fmtutil-hdr.cnf': No such file or directory
cat: 'var/lib/texmf/arch/installedpkgs/*.fmts': No such file or directory
/usr/share/libalpm/scripts/texlive-fmtutil: line 18: /usr/bin/fmtutil-sys: No such file or directory
error: command failed to execute correctly
(3/3) Updating TeXLive font maps...
cp: cannot stat 'usr/share/texmf-dist/web2c/updmap-hdr.cfg': No such file or directory
cat: 'var/lib/texmf/arch/installedpkgs/*.maps': No such file or directory
/usr/share/libalpm/scripts/texlive-updmap: line 12: /usr/bin/updmap-sys: No such file or directory
error: command failed to execute correctly
[~]
|
|
Packages | Any | Feature Request | Very High | High | [backuppc]: contains systemd files | Closed | |
Task Description
Description:
Since Hyperbola follows the Init Freedom Campaign, systemd unit files removal is required or add OpenRC init scripts to replace it.
Additional info:
* package version(s)
community/backuppc 4.1.2-1 [installed]
Enterprise-grade system for backing up Linux, Windows and MacOS PCs
* config and/or log files etc.
Additional info:
Steps to reproduce: install it
|
|
Packages | Any | Feature Request | Very High | High | [gpsd]: contains systemd files | Closed | |
Task Description
Since Hyperbola follows the Init Freedom Campaign, systemd unit files removal is required or add OpenRC init scripts to replace it.
Additional info:
* package version(s)
extra/gpsd 3.16-3 [installed]
GPS daemon and library to support USB/serial GPS devices
* config and/or log files etc.
Additional info:
Steps to reproduce: install it
|
|
Packages | Stable | Feature Request | Very High | High | [hiawatha]: remove systemd files, provide openrc | Closed | |
Task Description
Description:
Hiawatha contains only systemd files.
It shall be removed and openrc shall be provided
|
|
Packages | Stable | Feature Request | Very Low | Low | [digikam]: /usr/bin/cleanup_digikamdb: line 61: kreadco ... | Closed | |
Task Description
Description:
I just guess that this script cleanup_digikamdb depends on kreadconfig which is not there.
Additional info:
extra/digikam 5.5.0-2.hyperbola1 [installed]
Digital photo management application for KDE
Steps to reproduce:
$ cleanup_digikamdb
/usr/bin/cleanup_digikamdb: line 61: kreadconfig: command not found
Cleanup Databases v1.1 (digiKam )
————————————————————————-
/usr/bin/cleanup_digikamdb: line 61: kreadconfig: command not found
This program only handles SQLite databases.
[~]
|
|
Packages | Any | Freedom Issue | Very High | Critical | [pacman] uses "Linux" term instead of "GNU/Linux" in it ... | Closed | |
Task Description
The man page of pacman says:
DESCRIPTION
Pacman is a package management utility that tracks installed packages on a Linux
system
And I propose to change “Linux system” to “GNU/Linux system”.
|
|
Packages | Any | Freedom Issue | Very High | Critical | [xmind] is probably directing users to proprietary soft ... | Closed | |
Task Description
xmind when installed is showing that “this version is not licensed”, so that cannot be right. Even though there is GPL license on Github, that vague information in the software can and is wrongly understood:
Further it is asking for license key to get the “Pro” version.
Thus xmind is pointing to proprietary software.
That means xmind shall be removed from Hyperbola immediately as such as it is now cannot be in the fully free GNU distribution.
|
|
Packages | Any | Freedom Issue | Medium | Low | [ext3grep]: vague terminology "Content" in description ... | Closed | |
Task Description
Description:
community/ext3grep 0.10.2-4
A tool to investigate an ext3 file system for deleted content and possibly recover it
Description is vague because of the word “content”. Why not say instead “data”?
See:
https://www.gnu.org/philosophy/words-to-avoid.html#Content
|
|
Packages | Any | Freedom Issue | Medium | Low | [webfs]: vague terminology "Content" in description of ... | Closed | |
Task Description
Description:
community/webfs 1.21-13
Simple and instant http server for mostly static content.
Description is vague because of the word “content”. Why not simply say “files” instead and be more specific.
Even empty files without data inside can be served.
See:
https://www.gnu.org/philosophy/words-to-avoid.html#Content
|
|
Packages | Any | Freedom Issue | Medium | Low | [openstreetmap-map-icons-svn]: using vague "public doma ... | Closed | |
Task Description
Description:
community/openstreetmap-map-icons-svn 31588-1 [installed]
A set of public domain licensed map icons for general OSM use
It is questionable if it is “Licensed” or dedicated.
See the file:
/usr/share/licenses/openstreetmap-map-icons/svg-twotone/LICENSE.txt
it does not matter if the file is named “LICENSE”, it could be also named anyhow else.
There must be reason why the organization Creative Commons is not using the word “License” in that text, and that is why I propose to simply say in description:
A set of public domain map icons for general OSM use
|
|
Packages | Any | Freedom Issue | Medium | Low | [autoconf-archive]: using vague "freely" term in descr ... | Closed | |
|
|
Packages | Any | Freedom Issue | Medium | Low | [python-biopython]: using vague "freely" term in descri ... | Closed | |
|
|
Packages | Any | Freedom Issue | Medium | Low | [python2-biopython]: using vague "freely available" ter ... | Closed | |
|
|
Packages | Any | Freedom Issue | Medium | Low | [linux-atm]: using term "under Linux" in vague sense | Closed | |
|
|
Packages | Any | Freedom Issue | Medium | Low | [man-pages]: using term "Linux" | Closed | |
|
|
Packages | Any | Freedom Issue | Medium | Low | [net-tools]: using word "Linux" in vague manner | Closed | |
|
|
Packages | Any | Freedom Issue | Medium | Low | [man-pages-de]: using kernel name without operating sys ... | Closed | |
|
|
Packages | Any | Freedom Issue | Medium | Low | [man-pages-ru]: using kernel name without operating sys ... | Closed | |
|
|
Packages | Any | Freedom Issue | Medium | Low | [man-pages-zh_cn]: using kernel name without operating ... | Closed | |
|
|
Packages | Any | Freedom Issue | Medium | Low | [man-pages-zh_tw]: using kernel name without operating ... | Closed | |
|
|
Packages | Any | Freedom Issue | Very Low | Low | Vague terminology "open source" in description of packa ... | Closed | |
|
|
Packages | Any | Freedom Issue | Very Low | Low | [texmacs] ERROR: Unbound variable: eval-when, and not s ... | Closed | |
|
|
Packages | Any | Freedom Issue | Very Low | Low | [freecad] Steering users towards non-free software | Closed | |
|
|
Packages | Any | Freedom Issue | Very Low | Low | [libspnav] extra/libspnav 0.2.3-1, mentions "alternativ ... | Closed | |
|
|
Packages | Any | Freedom Issue | Very Low | Low | [classpath] meantioning "replacement to proprietary cod ... | Closed | |
|
|
Packages | Any | Freedom Issue | Very Low | Low | [mp3wrap] mentioning in description to be "alternative" ... | Closed | |
|
|
Packages | Any | Freedom Issue | Very Low | Low | [pinta] mentioning proprietary software Paint.NET | Closed | |
|
|
Packages | Any | Freedom Issue | Very Low | Low | [breeze]: referring to assets in description | Closed | |
|
|
Packages | Any | Freedom Issue | Very Low | Low | [knewstuff]: referring to assets in description | Closed | |
|
|
Packages | Any | Freedom Issue | Very Low | Low | [kpackage]: referring to assets in description | Closed | |
|
|
Packages | Any | Freedom Issue | Very Low | Low | [openmw]: referring to assets in description | Closed | |
|
|
Packages | Any | Freedom Issue | Very Low | Low | [retroarch-assets-xmb]: referring to assets in descript ... | Closed | |
|
|
Packages | Any | Freedom Issue | Very Low | Low | [warsow-data]: referring to assets in description | Closed | |
|
|
Packages | Any | Freedom Issue | Very Low | Low | [libsmf]: referring to "BSD-licensed" in description | Closed | |
|
|
Packages | Any | Freedom Issue | Very Low | Low | [gfbgraph]: using exclusively proprietary network | Closed | |
|
