All Projects

Description:

cat msg | /usr/sbin/sendmail – sendmail: No such file or directorycannot create temporary file /var/spool/smtpd/offline/1572544775.XXXXIqNsFX

Additional info:
* package version: 6.4.2p1-1.hyperbola2.backports1

It is same problem as here:
https://github.com/OpenSMTPD/OpenSMTPD/issues/839

I could solve it with:

sudo chmod g+s /usr/sbin/smtpctl
sudo chmod g+s /usr/sbin/smtpctl

and then

sudo rc-service smtpd start

Even though I think I should not need to start it to use only sendmail.

This is same issue as on:
https://bugzilla.redhat.com/show_bug.cgi?id=1151273

The paths changed and trying to mount davfs file system defined in /etc/fstab fails with error: unknown file system davfs

To remedy, I made symlink in /sbin to mount.davfs

The transition of paths had to take that in account as many mounted remote disks failed after upgrade.

Description:

$ marble-qt –latlone=0.5,6.5
Ignoring to load the following file since it doesn’t look like a valid Marble plugin: “/usr/lib/marble/plugins/libWlocatePositionProviderPlugin.so” Reason: “Cannot load library /usr/lib/marble/plugins/libWlocatePositionProviderPlugin.so: (libwlocate.so: cannot open shared object file: No such file or directory)”

When package libwlocate is installed, it is not showing this error.

Shall that package be dependency?

As reported here: https://forums.hyperbola.info/viewtopic.php?id=110

the domain Hyperbola.info is using such SPF record that does not allow the IP address 185.26.126.154 to send emails from bissen.hyperbola.info as seen on: https://mxtoolbox.com/SuperTool.aspx?action=spf%3ahyperbola.info&run=toolpage

Correct the SPF record as to enable deliveries of emails.

This is negatively impacting Hyperbola project in public mail servers which may consider hyperbola.info domain as domain sending spam.

Jun 10 11:12:41 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:14:57 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:16:02 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:16:50 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:17:28 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:18:17 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:19:12 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:21:01 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:21:37 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:22:22 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:22:36 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:22:54 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:23:09 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework

Description:

groff is typesetting system similar to TeX/LaTeX however, it is very small and very usable. It is not built properly with URW fonts, or such are missing, I cannot know all details. Overall groff package is basically somehow broken.

It shall depend on proper fonts, and such fonts should already be built, including their Unicode versions.

Package is only partially built.

Description:

after upgrade there are errors that shall not be there. I cannot know why.

admin-> upgrade-hyperbola
:: Synchronizing package databases...
 core                             186.6 KiB   283K/s 00:01 [###############################] 100%
 extra                           1918.8 KiB   259K/s 00:07 [###############################] 100%
 community                          4.1 MiB   217K/s 00:19 [###############################] 100%
 DEB_Arch_Extra                     4.2 KiB  0.00B/s 00:00 [###############################] 100%
 DEB_Arch_Extra.sig               280.0   B  0.00B/s 00:00 [###############################] 100%
:: Starting full system upgrade...
warning: elinks: local (0.13-18) is newer than community (0.12pre6-1.hyperbola1)
resolving dependencies...
looking for conflicting packages...

Packages (5) filesystem-2017.03-2.hyperbola10.4  icedove-uxp-52.9.20181107-1
             iceweasel-uxp-52.9.20181107-1  licenses-20140629-2.hyperbola3
             pacman-mirrorlist-20181031-1.hyperbola1.1

Total Download Size:    79.91 MiB
Total Installed Size:  226.65 MiB
Net Upgrade Size:        0.26 MiB

:: Proceed with installation? [Y/n]
:: Retrieving packages...
 filesystem-2017.03-2.hyperb...    13.0 KiB  0.00B/s 00:00 [###############################] 100%
 licenses-20140629-2.hyperbo...    68.4 KiB   171K/s 00:00 [###############################] 100%
 pacman-mirrorlist-20181031-...     5.6 KiB  0.00B/s 00:00 [###############################] 100%
 icedove-uxp-52.9.20181107-1...    37.6 MiB   403K/s 00:06 [############################---]  93     icedove-uxp-52.9.20181107-1...    37.9 MiB   41-----------------------------]      iceweasel-uxp-52.9.20181107...     3.8 MiB   867K/s 00:42 [##-----------------------------]       iceweasel-uxp-52.9.20181107...     3.8 MiB   600K/s 01:01 [##-----------------------------      iceweasel-uxp-52.9.20181107...     4.0 MiB   773K/s 00:47 [###----------------------------]    iceweasel-uxp-52.9.20181107...     4.1 MiB   702K/s 00:51 [###----------------------------]   iceweasel-uxp-52.9.20181107...    39.8 MiB   212K/s 03:12 [###############################] 100%
(5/5) checking keys in keyring                             [###############################] 100%
(5/5) checking package integrity                           [###############################] 100%
(5/5) loading package files                                [###############################] 100%
(5/5) checking for file conflicts                          [###############################] 100%
(5/5) checking available disk space                        [###############################] 100%
:: Processing package changes...
(1/5) upgrading filesystem                                 [###############################] 100%
error: extract: not overwriting dir with file /usr/local/share/man
error: problem occurred while upgrading filesystem
error: could not commit transaction
error: failed to commit transaction (transaction aborted)
Errors occurred, no packages were upgraded.

Description:

community/xwax 1.6-1
     Open-source vinyl emulation software for Linux.

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

extra/xorg-xev 1.2.2-1 (xorg-apps xorg)
    Print contents of X events

Description is vague because of the word “content”. Why not say “X events information”. At least description shall be changed which is very public. For man page I am not sure.

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Content

xmind when installed is showing that “this version is not licensed”, so that cannot be right. Even though there is GPL license on Github, that vague information in the software can and is wrongly understood:

Further it is asking for license key to get the “Pro” version.

Thus xmind is pointing to proprietary software.

That means xmind shall be removed from Hyperbola immediately as such as it is now cannot be in the fully free GNU distribution.

Description:

community/wxcam 1.1-9
     Webcam application for linux

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

community/wireshark-qt 2.2.6-1
     a free network protocol analyzer for Unix/Linux and Windows - Qt frontend

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

community/wireshark-gtk 2.2.6-1
     a free network protocol analyzer for Unix/Linux and Windows - GTK frontend

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Please remove references to proprietary software.

Description:

community/wireshark-cli 2.2.6-1
     a free network protocol analyzer for Unix/Linux and Windows - CLI version

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

I would remove Unix and Windows from description as those words steer users towards non-free proprietary software.

Description:

I have tried to upgrade hyperbola.

Critical upgrades cannot be installed when wesnoth is installed, there are conflicting files

Steps to reproduce:

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 arch-keyring-201808...  1605.2 KiB   617K/s 00:03 [#########] 100%
 hyperbola-keyring-2...   215.9 KiB   635K/s 00:00 [#########] 100%
 linux-libre-lts-4.9...    59.6 MiB   749K/s 01:22 [#########] 100%
 openvpn-2.4.6-1.hyp...   402.2 KiB  1149K/s 00:00 [#########] 100%
 iceweasel-uxp-52.9....    39.8 MiB   839K/s 00:49 [#########] 100%
 libgdm-3.24.1-1.hyp...    57.3 KiB  1912K/s 00:00 [#########] 100%
 ntp-4.2.8.p11-2.hyp...  1798.4 KiB   833K/s 00:02 [#########] 100%
 sddm-0.14.0-2.hyper...     3.2 MiB   770K/s 00:04 [#########] 100%
 lxdm-0.5.3-4.hyperb...    98.4 KiB   984K/s 00:00 [#########] 100%
 tp_smapi-lts-0.43-1...    26.6 KiB  2.60M/s 00:00 [#########] 100%
 wesnoth-data-1.14.4...   395.1 MiB   745K/s 09:03 [#########] 100%
 wesnoth-1.14.4-1.hy...     5.5 MiB   616K/s 00:09 [#########] 100%
(12/12) checking keys in keyring                   [#########] 100%
(12/12) checking package integrity                 [#########] 100%
(12/12) loading package files                      [#########] 100%
(12/12) checking for file conflicts                [#########] 100%
error: failed to commit transaction (conflicting files)
/usr/share/icons/hicolor/128x128/apps/wesnoth-icon.png exists in both 'wesnoth-data' and 'wesnoth'
/usr/share/icons/hicolor/16x16/apps/wesnoth-icon.png exists in both 'wesnoth-data' and 'wesnoth'
/usr/share/icons/hicolor/256x256/apps/wesnoth-icon.png exists in both 'wesnoth-data' and 'wesnoth'
/usr/share/icons/hicolor/32x32/apps/wesnoth-icon.png exists in both 'wesnoth-data' and 'wesnoth'
/usr/share/icons/hicolor/512x512/apps/wesnoth-icon.png exists in both 'wesnoth-data' and 'wesnoth'
/usr/share/icons/hicolor/64x64/apps/wesnoth-icon.png exists in both 'wesnoth-data' and 'wesnoth'
/usr/share/metainfo/wesnoth.appdata.xml exists in both 'wesnoth-data' and 'wesnoth'
Errors occurred, no packages were upgraded.

Description:

extra/webkitgtk 2.4.11-6.hyperbola1
    Legacy Web content engine for GTK+ 3, without geoclue2 support

The description is vague. There is not even need to use “content” here. Web engine should be very clear. “Content” alone does not make sense.

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Content

Description:

extra/webkit2gtk 2.16.1-3.hyperbola1 [installed]
    GTK+ Web content engine library, without geoclue2 support

The description is vague as it is using “content” in description. Why not say “elements” or something more descriptive.

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Content

Description:

community/webfs 1.21-13
    Simple and instant http server for mostly static content.

Description is vague because of the word “content”. Why not simply say “files” instead and be more specific.

Even empty files without data inside can be served.

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Content

Description:

The description of the package need to be changed to accommodate:
https://www.gnu.org/philosophy/words-to-avoid.html

To refer to published works as “assets”, or “digital assets”, is even worse than calling them “content” — it presumes they have no value to society except commercial value.

community/warsow-data 2.1.2-1.hyperbola2
    Free online multiplayer competitive FPS based on the Qfusion engine (data files), without nonfree assets

core/util-linux 2.29.2-2.hyperbola2 (base base-devel) [installed]
     Miscellaneous system utilities for Linux, with eudev and libeudev support

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description is referring to operating system, and not to the kernel itself (Linux). It shall be amended.

Description:

community/ussp-push 0.11-6
     OBEX object pusher for Linux

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

community/usb_modeswitch 2.5.0-1
     Activating switchable USB devices on Linux.

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

Tuxcards is seemingly published under some GPL license, on the splash screen I did not see which one.

The splash screen claims it is Donationware, which is bringing confusion.

Picture: https://gnu.support/images/issues/2018-06-17-21:35:41.png

Reference: https://en.wikipedia.org/wiki/Donationware

So either the splash screen shall be removed, as it is donationware, or author contacted, or package removed as it is unclear if it is free software or donationware. Free software can be sold, and if it is sold, then such software shall not ask for donations again in my opinion.

extra/tomboy 1.15.4-1
     Desktop note-taking application for Linux and Unix

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description is referring to operating system, and not to the kernel itself (Linux). It shall be amended.

Description:

community/tinyserial 20090305-2
     Small minicom replacement for accessing serial ports on Linux inspired by FreeBSD 'tip'

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

community/tilda 1.3.3-2
     A Gtk based drop down terminal for Linux and Unix

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux