All Projects

https://github.com/loh-tar/wpa-cute/releases

I know there are plans to remove NetworkManager. I wondered if we could replace it in 0.4 with Wpa_Cute. seen in the above link.

I haven’t been able to compile it, but it has been updated as recent as 2018 december (stable)

or 2019 january. :)

WPA_GUI doesn’t seem to work well for me, it runs into weird errors when I start it. Long story short, I run into this issue with wpa_supplicant when i do it manually:

https://wiki.archlinux.org/index.php/Wpa_supplicant:

Password-related problems

wpa_supplicant may not work properly if directly passed via stdin particularly long or complex passphrases which include special characters. This may lead to errors such as failed 4-way WPA handshake, PSK may be wrong when launching wpa_supplicant.

In order to solve this try using here strings wpa_passphrase <MYSSID> «< “<passphrase>” or passing a file to the -c flag instead:

# wpa_supplicant -i <interface> -c /etc/wpa_supplicant/example.conf

In some instances it was found that storing the passphrase cleartext in the psk key of the wpa_supplicant.conf network block gave positive results (see [2]). However, this approach is rather insecure. Using wpa_cli to create this file instead of manually writing it gives the best results most of the time and therefore is the recommended way to proceed.
Problems with eduroam and other MSCHAPv2 connections

This is my issue with wpa_supplicant sadly... and I do not know how to workaround that without a GUI.

but Wpa_Supplicant_gui does not fix it either, it doesn’t even load properly on my other laptop.

It says it cannot get the status of wpa_supplicant when I load it.

This could be an issue if you get rid of NetworkManager for some users.

So yeah, please take a look at my request okay? Wait for 0.3 to be released to add this if possible. I know you guys are overworked, etc... and it doesn’t need to be done now anyhow. ;)

I have a picture to prove it, not sure if this only affects me, but it is annoying…

:(

Anywho, if you can fix this would be appreciated, very much!

:)

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and ARM A7/A53 promises to be a great architecture example for low-power computers, laptops and embedded systems.

NOTE: ARM porting is focused only for HyperbolaBSD .

In particular, I would like to see the a20 arm processor supported and also, the talos 2 desktop supported. (powerpc)

The a20 is important because it will be supported by this: https://www.crowdsupply.com/eoma68/micro-desktop

I would really love to have buy this and see it supported by Hyperbola. :)

Within a year if you can support that, I would be extremely, extremely pleased.

as for the powerpc one, I don’t really plan on getting it, but I know that some people may, and I think that it would be good for them to be able to move onto hyperbola. The first is more important to me though.

By either December or next January, is when I would probably want it to be supported. :)

Also, ath9k usb wifi cards would need to be supported for this though... just to warn you.

I already am donating to you guys though through liberapay, please make this happen in the future. ;)

https://github.com/rodlie/draco

its like Lumina Desktop, but its more lightweight and better for Gnu/Linux

:)

Matter of fact, I hope its okay, but the latest stable build, of Draco is vastly better than Lumina. And for this reason I wanted to know if you could put higher priority on this than the Lumina Desktop request.

A Desktop Enivronment mostly focused on BSD, but also one that is very lightweight and easily customized. Would love to see this desktop on Hyperbola and later whenever Emulatorman makes it, Hyperbola/GNU/HyperBK

https://github.com/lumina-desktop/lumina/releases

Version is the latest one in above link of stable.

I would like this, because, it looks even better than xfce4. It does use an older qt3 though, BUT, they are maintaining QT3 and improving it themselves.

Plus, its more lightweight than xfce4 and maybe even lxqt too without looking like crap like lxqt and yet still is better than a WM.

I know you don’t like stuff that is abandonware in any sense, but given its being maintained, I hope you will add it.

But let me know.

captcha is now impossible for me to get past,

it keeps giving me this bs:

what is the output of, echo $(date -u +%Y) “GNU”|sha384sum

I tried copying and pasting it into the terminal emulator and I got the answer and put it in the captcha......

well it refused to accept the answer. I tried reloading... still nothing.

I tried again and again to get it to work, still nothing.

In essence, I can now no longer post on the forums... ugh.

It’s enough to make me want to tear my hair out.

Captcha sometimes can be so obnoxius I think it may even be evil.

Sorry for the obvious rant, this just really gets on my nerves. I doubt other people don’t feel the same.

this package is under gpl3. It is the most reasonable chess game because it can be easy or hard depending on your preference.

this would be appreciated greatly, although I am in no hurry.

recommended fix, remove non-free software entries in menu and replace them with applications that actually exist.

greasemonkey-3.31.4 version desired. I would love to see it implemented for Iceape

Does not need any insane depends, such as dbus, as far as the website says:

https://developers.hp.com/hp-linux-imaging-and-printing/install/manual/distros/other

its optional,

I would like to see it readded in the future...

I need it for printing, only one of my laptops is on 0.3, for this purpose at this time.

This already works for it, but I just thought I would request it to be put in.

from the, forums I have heard you plan to base your new iceweasel version from basilisk when firefox switches to web extensions completely. I am concerned about this because noscript and many other addons will no longer support legacy after this point...

I really think you are doing a disservice if you do this. I think we should personally fix the leaks that mozilla makes, the way trisquel 8 does it. I have heard they know how to fix those leaks. Or, another way forward would be to find a way that involves forking firefox esr 60 and correcting the bugs with the help of tcpdump.

Its madness to fork from basilisk because without noscript webextensions and other such addons, any benefits you get will be very small compared to what you have lost in the process.

I doubt you want to have two different versions of iceweasel esr, one that is with webext and one without. But please don’t try to use basilisk as the base for iceweasel.

I really think its a bad idea long term. Do I dislike mozilla’s new plan? Yes... of course. But do I think using basilisk will solve it? Not unless mozilla angers enough people to make their addons for basilisk instead... Which I really, really doubt very highly.

Please hear this request and don’t just close it. Rather, instead discuss it for a long time. Without noscript, firefox is immensely insecure. And Firefox’s legacy noscript version will die in the future. In the NEAR FUTURE I MIGHT ADD

Of course, there are other firefox addons I want that are webext. So yeah... Nano Adblocker, Privacy Settings, Privacy Possum/Privacy Badger, Viewtube, Decentraleyes to name a few.

I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,

https://libreboot.org/docs/gnulinux/grub_hardening.html

I wondered if there is anything different that needs to be done to get this part done:

gpg –homedir keys –detach-sign my.initramfs
gpg –homedir keys –detach-sign my.kernel
gpg –homedir keys –detach-sign libreboot_grub.cfg
gpg –homedir keys –detach-sign my.grubtest.cfg

it gives me a bunch of weird errors

the screen moves back and forth from left to right randomly, no matter what I do, any games any adapters do not work.

I wanted to have some fun with some old games...

Has anyone used mupen64plus successfully on hyperbola 0.2? I cannot get it to work without being completely confusing for the reasons I have mentioned and also, the glaring of the screen. Which only happens with mupen64plus...

1.2.4 version would be nice for Iceape.

I would like it if you could, fork noscript legacy and constantly update it based on the webext one’s changes without of course, using the webext.

What I mean, is be applying the new security fixes they put into the webext one (the ones you need)

and then, apply them into iceweasel-classic’s noscript.

Even if you plan on updating it once a month, this is critical in my opinion for keeping the browser safe.

5.1.85 is the current latest legacy noscript version within noscript.net’s website.

ps, this is doable right?

We don’t want obsolete software after all.

This addon works for any firefox based browser but not seamonkey based or this.

I wondered if you could implement the iceweasel one for Iceape.

I just wanted to do some testing through qemu to report bugs if I can...

Can you make a beginners guide to installing hyperbola through qemu?

This would really be appreicated.

1:2.8 or later, qemu-kvm

This would make qemu so much easier and faster, please support this package.

random_agent_spoofer-0.9.5.8.4-fx.xpi is the version I desire, can you implement it?

0.9.5.8.4 version would be good to have.

/sbin/openrc-run: bad interpreter: No such file or directory

I get this error whenever I try to start dhcpcd with sv /etc/runit/

And for sndiod I get this doing the same guide,

warning: sndiod: unable to open supervise/ok: file does not exist

Although rather ironically, If I type sndiod or dhcpcd into root, it works just fine.

Maybe its an FHS issue or possibly, I am screwing up? I am not sure. Feedback is welcome.

This is what I did:

=⇒ Add a service:

ln -s /etc/sv/<service> /var/service
==> Start/stop/restart a service:
sv <start/stop/restart> <service>

more or less, I used this guide.