|
Software Development | General | Implementation Request | Very High | Critical | ARM (aarch and armv7h) porting | Closed | |
Task Description
The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .
Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.
For the future of free computing, we need support architectures that do not come with such malware pre-installed, and ARM A7/A53 promises to be a great architecture example for low-power computers, laptops and embedded systems.
NOTE: ARM porting is focused only for HyperbolaBSD .
|
|
Packages | Stable | Update Request | High | Medium | [xscreensaver] needs an update, since there is a bugfix ... | Closed | |
Task Description
We seem to have a very old version of xscreensaver... Could you possibly update it?
this may be a security issue/privacy issue.
|
|
Packages | Stable | Update Request | High | High | [qt5] upgrade Qt project to the 5.6 LTS version, requir ... | Closed | |
Task Description
Cannot mix incompatible Qt library (version 0×50800) with this library (version 0×50904) Aborted
./Nextcloud-2.3.3-x86_64.AppImage: /usr/lib/libQt5Core.so.5: version `Qt_5.9’ not found (required by /tmp/.mount_NextclpprMnG/usr/bin/../lib/libqt5keychain.so.1
These two packages are directly affected by an older qt5...
Could you update all the qt packages to the LTS version available?
|
|
Packages | Stable | Implementation Request | High | Medium | [nitrokey-app] add package | Closed | |
Task Description
This package is in debian, and it allows the use of hardware encrypted flash drives.
|
|
Packages | Any | Bug Report | High | High | [firetools] doesn't show up as being sandboxed in sandb ... | Closed | |
Task Description
Firetools sandbox list shows nothing whenever I use icedove-hardened or iceweasel-uxp-hardened. or vlc, or anything at this point.
Firejail still works, but the sandbox list on the applet, shows nothing.
I don’t really know why though. may need to updated.
dunno. I can wait on this one if need be, but it is kind of annoying.
|
|
Packages | Any | Bug Report | High | High | [firetools] doesn't show up as being sandboxed in sandb ... | Closed | |
Task Description
Neither iceweasel-uxp, nor icedove nor hexchat, nor vlc show up as being sandboxed in sandbox list.
I also check and see that firejail isn’t running also.
I think it might be wise to upgrade firetools. and also to make sure hardened packages such as icedove-hardened/iceweasel-uxp-hardened work properly.
This should be considered a high level priority due to firetools being a security application. Wouldn’t you say?
|
|
Packages | Testing | Bug Report | High | Critical | Runit errors, | Closed | |
Task Description
/sbin/openrc-run: bad interpreter: No such file or directory
I get this error whenever I try to start dhcpcd with sv /etc/runit/
And for sndiod I get this doing the same guide,
warning: sndiod: unable to open supervise/ok: file does not exist
Although rather ironically, If I type sndiod or dhcpcd into root, it works just fine.
Maybe its an FHS issue or possibly, I am screwing up? I am not sure. Feedback is welcome.
This is what I did:
=⇒ Add a service:
ln -s /etc/sv/<service> /var/service
==> Start/stop/restart a service:
sv <start/stop/restart> <service>
more or less, I used this guide.
|
|
Services | PunBB Issue | Bug Report | High | Critical | Cannot reply to any thread on the forums. | Closed | |
Task Description
captcha is now impossible for me to get past,
it keeps giving me this bs:
what is the output of, echo $(date -u +%Y) “GNU”|sha384sum
I tried copying and pasting it into the terminal emulator and I got the answer and put it in the captcha......
well it refused to accept the answer. I tried reloading... still nothing.
I tried again and again to get it to work, still nothing.
In essence, I can now no longer post on the forums... ugh.
It’s enough to make me want to tear my hair out.
Captcha sometimes can be so obnoxius I think it may even be evil.
Sorry for the obvious rant, this just really gets on my nerves. I doubt other people don’t feel the same.
|
|
Services | PunBB Issue | Bug Report | Medium | Medium | pun bot bugs | Closed | |
Task Description
Pun bot rejects correct answer and then asks the same question again.
This error is maddening...
|
|
Packages | Any | Bug Report | Medium | Medium | [wine] doesn't allow sound. + all wine versions =2.7 | Closed | |
Task Description
I wondered if anyone else has experienced this, I cannot use sound on one of my games which has no drm on it. It’s not exactly, free as in freedom, (the game I want to play) but it has no drm. I could get it working on trisquel, debian, devuan, fedora... but not hyperbola for some reason.
The other problem though is that I know there are some errors with the packaging, because wine-staging and wine both say 2.7 version. Which absolutely cannot be right because wine stable hasn’t even released ver 2.1! yet... xD
Anyways though, This would be nice if you could fix it. sound won’t initalize and the versions are wrong at the moment...
|
|
Packages | Stable | Feature Request | Medium | Medium | [laptop-mode-tools] add package | Closed | |
Task Description
I would greatly appreciate it as it really increases my computer’s battery life a lot.
|
|
Packages | Stable | Bug Report | Medium | High | [gufw][firewalld] have errors | Closed | |
Task Description
Gufw doesn’t stay on like it usually does when you leave the GUI.
FirewallD doesn’t turn on automatically, and won’t turn on period.
Gufw will not allow me to add any rules.
FirewallD is non-functional in general
That sums up my experiences and thoughts.
|
|
Packages | Stable | Feature Request | Medium | Medium | [aqemu] add package | Closed | |
Task Description
This package makes virtualization very simple for newbies. It would be nice to have it in the near future.
|
|
Services | HyperWiki/DokuWiki | Implementation Request | Medium | Medium | Libreboot hardening grub guide | Closed | |
Task Description
I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,
https://libreboot.org/docs/gnulinux/grub_hardening.html
I wondered if there is anything different that needs to be done to get this part done:
gpg –homedir keys –detach-sign my.initramfs gpg –homedir keys –detach-sign my.kernel gpg –homedir keys –detach-sign libreboot_grub.cfg gpg –homedir keys –detach-sign my.grubtest.cfg
it gives me a bunch of weird errors
|
|
Packages | Any | Bug Report | Low | High | [xfce4-power-manager] locking session issue | Closed | |
Task Description
I probably should’ve mentioned this before, but if it is set to suspend when lid is closed, it should automatically lock. if the security option: lock screen with system is set to sleep is tweaked on it doesn’t lock always.
This is word for word what I wrote in the forums, but yeah... it is a problem say if someone wants to use your laptop without your permission and can do so.
But it is also a problem if you set it to lock instead because it is more prone to overheating when your not using it, and it doesn’t suspend quickly enough.
I have tried this many times and the same story can be told, again and again.
I think this issue should be considered high or critical merely because of the privacy risk if someone gets their hands on your laptop while its on. Even if you have been away... :/
I wonder if anyone else has this issue... well you guys will tell me I am sure. if critical doesn’t match what you think I am sure you will change it. ;)
|
|
Packages | Any | Update Request | Very Low | High | ufw update/ufw bug | Closed | |
Task Description
There appears to be a bug with the current version of ufw, 0.35-2
Dunno if updating it would fix it, but it is kind of annoying and possibly security issue.
it says ufw is inactive when I reboot despite it being installed in the runlevel.
|
|
Software Development | General | Security Issue | Very Low | Medium | spacefm possible security error | Closed | |
Task Description
No root settings found in /etc/spacefm/ Setting a root editor in Preferences should remove this warning on startup. Otherwise commands run as root may present a security risk. EXEC(/usr/share/applications/sakura.desktop)=sakura
I am not sure how much of a risk this is, I will set it at high for now, but feel free to change it to low if its not a huge issue.
|
|
Packages | Any | Bug Report | Very Low | Medium | sndio doesn't autostart on all my comps... | Closed | |
Task Description
doesn’t work automatically, not sure why, but then again, I just reset it using openrc, like this...
doas rc-service sndiod restart
Then it works again, although this bug doesn’t happen on all my Hyperbola 0.4 laptops, which is odd...
For most of my laptops it works automatically, but one of them it doesn’t, might be misconfigured maybe? Idk...
Anywho, I am curious if anyone else has the same problem.
|
|
Software Development | Iceape-UXP | Update Request | Very Low | Medium | noscript for Iceape request | Closed | |
Task Description
Add version 5.1.9
Very important for iceape users to keep updated often.
|
|
Packages | Any | Bug Report | Very Low | Low | lightdm/lxdm bug | Closed | |
Task Description
It appears when I plug in my libreboot laptop x200 in, it appears to dim the screen and when its unplugged, the screen is bright again. Something peculiar is at work, I wondered if this could be fixed.
My assumption is it is related to lxdm or lightdm. Any thoughts?
I am currently using 0.4, so I don’t expect this to be a fast process, just when you get a chance okay?
|
|
Installation | General | Bug Report | Very Low | Low | installation successful, but buggy | Closed | |
Task Description
https://forums.hyperbola.info/viewtopic.php?pid=745#p745
This was the guide I followed, but there was one small issue:
The issue is attached within a picture. You will notice that a bunch of unneeded shortcuts are on my desktop right? well... I wondered how I can remove them. multiple filesystem root(s) and home(s) and boot(s)
but yeah, its extremely weird and messed up. a bit funny but troublesome and annoying.
Should I email the user who made that guide or leave it here? That’s what I am wondering.
|
|
Packages | Any | Freedom Issue | Very Low | Low | flatpak doesn't work/Docker doesn't work | Closed | |
Task Description
without, flathub. But flathub requires qt5, version 5.9
And the part of docker that works, is also gone. This may be easier to fix.
I need one of those two to work. That’s all.
|
|
Packages | Any | Bug Report | Very Low | Medium | addons compatible with seamonkey don't work with iceape ... | Closed | |
Task Description
Noscript, No Resource url leak, Random Agent Spoofer, Ublock Origin
Interestingly enough, HTTPS Always works with iceape-uxp and privacy settings and greasemonkey don’t work with either...
But I would like all of the above to work with iceape-uxp
|
|
Packages | Any | Implementation Request | Very Low | Low | addon request | Closed | |
Task Description
sslsleuth
|
|
Packages | Any | Feature Request | Very Low | Low | add package powerkit | Closed | |
Task Description
https://github.com/rodlie/powerkit/releases
Version 1.0 requested
When you add Lumina desktop, add this package for sure. Although it is compatible with other desktops too. So it would be good to add it regardless.
|
|
Software Development | UXP applications | Implementation Request | Very Low | Very Low | a libre version of Navigator, | Closed | |
|
|
Installation | General | Freedom Issue | Very Low | High | [openbox] provides nonfree software support in the menu | Closed | |
|
|
Packages | Any | Security Issue | Very Low | High | [octopi] requires su | Closed | |
|
|
Packages | Any | Feature Request | Very Low | Low | [nextcloud-client] add package | Closed | |
|
|
Packages | Stable | Feature Request | Very Low | Low | [linux-libre-lts-xtreme] add package | Closed | |
|
|
Installation | General | Freedom Issue | Very Low | Low | [jwm] provides nonfree software support in the menu | Closed | |
|
|
Packages | Any | Backport Request | Very Low | Medium | [iceweasel-uxp] Privacy Possum continuous support for I ... | Closed | |
|
|
Packages | Any | Backport Request | Very Low | Medium | [iceowl] package request | Closed | |
|
|
Installation | General | Feature Request | Very Low | Low | [calamares] add graphical installer with FDE support | Closed | |
|
|
Packages | Any | Bug Report | Very Low | Medium | [abiword] flickers | Closed | |
|
|
Packages | Any | Bug Report | Very Low | Low | Xenocara xbacklight bug | Closed | |
|
|
Packages | Any | Update Request | Very Low | Medium | Update addon random agent spoofer | Closed | |
|
|
Software Development | Icedove-UXP | Backport Request | Very Low | Medium | Ublock origin for Icedove-UXP | Closed | |
|
|
Packages | Any | Freedom Issue | Very Low | Low | Ublock origin continous support | Closed | |
|
|
Packages | Any | Backport Request | Very Low | Low | Ublock Origin for Iceape | Closed | |
|
|
Packages | Any | Freedom Issue | Very Low | Low | Ssleuth for Iceape | Closed | |
|
|
Packages | Any | Backport Request | Very Low | Low | Self Destructing Cookies for Iceape | Closed | |
|
|
Software Development | Iceape-UXP | Implementation Request | Very Low | Medium | Random agent spoofer for Iceape | Closed | |
|
|
Packages | Any | Backport Request | Very Low | Medium | Random Agent Spoofer for Iceape | Closed | |
|
|
Packages | Any | Feature Request | Very Low | Medium | Qemu-kvm package request | Closed | |
|
|
Packages | Any | Implementation Request | Very Low | Medium | Qemu Documentation Request | Closed | |
|
|
Packages | Any | Implementation Request | Very Low | Medium | Privacy Settings for Iceape | Closed | |
|
|
Software Development | Iceweasel-UXP | Security Issue | Very Low | High | Noscript continual update request, | Closed | |
|
|
Packages | Any | Backport Request | Very Low | Medium | No Resource Url Leak for Iceape | Closed | |
|
|
Packages | Stable | Bug Report | Very Low | Low | Mupen64plus acts buggy | Closed | |
|