All Projects

http://repository.binaryoutcast.com/artifacts/navigator-builds/

http://binaryoutcast.com/projects/borealis/

unlike Navigator though, it needs two things: compatibility with seamonkey addons, (the ones that effect web browsing, not the mail email parts)

and to be based off of the latest version of seamonkey, only obviously just the navigator part. I understand this might be hard to implement now, so I can wait if need be, Just thought I would show this to you.

PS, if you ever make HyperBK, port it to that too, but until then, just the os that I mentioned.

Also, last thing, any seamonkey addons that I have already asked for seamonkey, again that aren’t email/mail based, implement them for this too. :)

I will put the severity at very low if that’s okay, just until you have actual time/whatever...

Let me know if this is even remotely possible with this build.

/sbin/openrc-run: bad interpreter: No such file or directory

I get this error whenever I try to start dhcpcd with sv /etc/runit/

And for sndiod I get this doing the same guide,

warning: sndiod: unable to open supervise/ok: file does not exist

Although rather ironically, If I type sndiod or dhcpcd into root, it works just fine.

Maybe its an FHS issue or possibly, I am screwing up? I am not sure. Feedback is welcome.

This is what I did:

=⇒ Add a service:

ln -s /etc/sv/<service> /var/service
==> Start/stop/restart a service:
sv <start/stop/restart> <service>

more or less, I used this guide.

Does not need any insane depends, such as dbus, as far as the website says:

https://developers.hp.com/hp-linux-imaging-and-printing/install/manual/distros/other

its optional,

I would like to see it readded in the future...

I need it for printing, only one of my laptops is on 0.3, for this purpose at this time.

https://github.com/loh-tar/wpa-cute/releases

I know there are plans to remove NetworkManager. I wondered if we could replace it in 0.4 with Wpa_Cute. seen in the above link.

I haven’t been able to compile it, but it has been updated as recent as 2018 december (stable)

or 2019 january. :)

WPA_GUI doesn’t seem to work well for me, it runs into weird errors when I start it. Long story short, I run into this issue with wpa_supplicant when i do it manually:

https://wiki.archlinux.org/index.php/Wpa_supplicant:

Password-related problems

wpa_supplicant may not work properly if directly passed via stdin particularly long or complex passphrases which include special characters. This may lead to errors such as failed 4-way WPA handshake, PSK may be wrong when launching wpa_supplicant.

In order to solve this try using here strings wpa_passphrase <MYSSID> «< “<passphrase>” or passing a file to the -c flag instead:

# wpa_supplicant -i <interface> -c /etc/wpa_supplicant/example.conf

In some instances it was found that storing the passphrase cleartext in the psk key of the wpa_supplicant.conf network block gave positive results (see [2]). However, this approach is rather insecure. Using wpa_cli to create this file instead of manually writing it gives the best results most of the time and therefore is the recommended way to proceed.
Problems with eduroam and other MSCHAPv2 connections

This is my issue with wpa_supplicant sadly... and I do not know how to workaround that without a GUI.

but Wpa_Supplicant_gui does not fix it either, it doesn’t even load properly on my other laptop.

It says it cannot get the status of wpa_supplicant when I load it.

This could be an issue if you get rid of NetworkManager for some users.

So yeah, please take a look at my request okay? Wait for 0.3 to be released to add this if possible. I know you guys are overworked, etc... and it doesn’t need to be done now anyhow. ;)

Gufw doesn’t stay on like it usually does when you leave the GUI.

FirewallD doesn’t turn on automatically, and won’t turn on period.

Gufw will not allow me to add any rules.

FirewallD is non-functional in general

That sums up my experiences and thoughts.

Cannot mix incompatible Qt library (version 0×50800) with this library (version 0×50904)
Aborted

./Nextcloud-2.3.3-x86_64.AppImage: /usr/lib/libQt5Core.so.5: version `Qt_5.9’ not found (required by /tmp/.mount_NextclpprMnG/usr/bin/../lib/libqt5keychain.so.1

These two packages are directly affected by an older qt5...

Could you update all the qt packages to the LTS version available?

This package makes virtualization very simple for newbies. It would be nice to have it in the near future.

I would greatly appreciate it as it really increases my computer’s battery life a lot.

This package is in debian, and it allows the use of hardware encrypted flash drives.

We seem to have a very old version of xscreensaver... Could you possibly update it?

this may be a security issue/privacy issue.

It would be awesome to have a kernel like this imported to hyperbola.

https://www.parabola.nu/packages/kernels/x86_64/linux-libre-lts-xtreme/

the screen moves back and forth from left to right randomly, no matter what I do, any games any adapters do not work.

I wanted to have some fun with some old games...

Has anyone used mupen64plus successfully on hyperbola 0.2? I cannot get it to work without being completely confusing for the reasons I have mentioned and also, the glaring of the screen. Which only happens with mupen64plus...

captcha is now impossible for me to get past,

it keeps giving me this bs:

what is the output of, echo $(date -u +%Y) “GNU”|sha384sum

I tried copying and pasting it into the terminal emulator and I got the answer and put it in the captcha......

well it refused to accept the answer. I tried reloading... still nothing.

I tried again and again to get it to work, still nothing.

In essence, I can now no longer post on the forums... ugh.

It’s enough to make me want to tear my hair out.

Captcha sometimes can be so obnoxius I think it may even be evil.

Sorry for the obvious rant, this just really gets on my nerves. I doubt other people don’t feel the same.

Pun bot rejects correct answer and then asks the same question again.

This error is maddening...

I would like it if you could, fork noscript legacy and constantly update it based on the webext one’s changes without of course, using the webext.

What I mean, is be applying the new security fixes they put into the webext one (the ones you need)

and then, apply them into iceweasel-classic’s noscript.

Even if you plan on updating it once a month, this is critical in my opinion for keeping the browser safe.

5.1.85 is the current latest legacy noscript version within noscript.net’s website.

ps, this is doable right?

We don’t want obsolete software after all.

I would like to have this package also added to icedove-uxp.
It would be lovely, given that the latest legacy package of ublock origin supports legacy/thunderbird without webext of course. :)

Add version 5.1.9

Very important for iceape users to keep updated often.

0.9.5.8.4 version would be good to have.

I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,

https://libreboot.org/docs/gnulinux/grub_hardening.html

I wondered if there is anything different that needs to be done to get this part done:

gpg –homedir keys –detach-sign my.initramfs
gpg –homedir keys –detach-sign my.kernel
gpg –homedir keys –detach-sign libreboot_grub.cfg
gpg –homedir keys –detach-sign my.grubtest.cfg

it gives me a bunch of weird errors

I have a picture to prove it, not sure if this only affects me, but it is annoying…

:(

Anywho, if you can fix this would be appreciated, very much!

:)

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and ARM A7/A53 promises to be a great architecture example for low-power computers, laptops and embedded systems.

NOTE: ARM porting is focused only for HyperbolaBSD .

my recommended fix, make it reflect the applications that are actually installed on the system after removing non-free software support.

recommended fix, remove non-free software entries in menu and replace them with applications that actually exist.

In particular, I would like to see the a20 arm processor supported and also, the talos 2 desktop supported. (powerpc)

The a20 is important because it will be supported by this: https://www.crowdsupply.com/eoma68/micro-desktop

I would really love to have buy this and see it supported by Hyperbola. :)

Within a year if you can support that, I would be extremely, extremely pleased.

as for the powerpc one, I don’t really plan on getting it, but I know that some people may, and I think that it would be good for them to be able to move onto hyperbola. The first is more important to me though.

By either December or next January, is when I would probably want it to be supported. :)

Also, ath9k usb wifi cards would need to be supported for this though... just to warn you.

I already am donating to you guys though through liberapay, please make this happen in the future. ;)

No root settings found in /etc/spacefm/ Setting a root editor in Preferences should remove this warning on startup. Otherwise commands run as root may present a security risk.
EXEC(/usr/share/applications/sakura.desktop)=sakura

I am not sure how much of a risk this is, I will set it at high for now, but feel free to change it to low if its not a huge issue.