|
Packages | Stable | Bug Report | Very Low | High | [vlc] DVB : cache_block stream error: cannot pre fill b ... | Closed | |
Task Description
Current VLC version (3.0.4-3.hyperbola1.backports1) fails to play DVB stream using a RTL2832 usb dongle.
I start the playlist like this :
vlc channels.conf
but it returns the following error :
cache_block stream error: cannot pre fill buffer
Also, it asks the user to be in “video” group to access DVB device, this was not needed before with Hyperbola 0.2.9. User being in “wheel” was enough. Anyway, even after adding my user to video group, it still fails with “cache_block stream error: cannot pre fill buffer”
This is not an issue with my DVB adapter or driver. rtl2832 is correctly loaded. And I can play the channels.conf playlist just fine with “mpv” or “mplayer”. Also, the channels.conf used works just fine with a more recent version of VLC on an other system (Manjaro) so something is broken with the current VLC used.
Maybe a package bump would fix the issue.
|
|
Packages | Stable | Bug Report | Medium | Critical | [virt-manager] Failed to initialize a valid firewall ba ... | Closed | |
Task Description
[virt-manager] Failed to initialize a valid firewall backend
I cannot start any virtual machine with current virt-manager. The error message is the following :
Failed to initialize a valid firewall backend
My username is in “kvm” group.
The only modification to the libvirt config files I made are in /etc/libvirt/qemu.conf
[...]
# Some examples of valid values are:
#
# user = "qemu" # A user named "qemu"
# user = "+0" # Super user (uid=0)
# user = "100" # A user named "100" or a user with uid=100
#
#user = "root"
user = "david"
[...]
The libvirtd service is enabled (and start without error) Also, the optional dependencies are correctly installed :
ebtables: required for default NAT networking [installed]
dnsmasq: required for default NAT/DHCP for guests [installed]
bridge-utils: for bridged networking [installed]
This was working fine previously (with 0.2.9) so I don’t know why this isn’t working anymore. As said previously, my config hasn’t changed.
|
|
Packages | Stable | Bug Report | Medium | Medium | [virt-install] ERROR '_OsVariant' object has no attribu ... | Closed | |
Task Description
Trying to create a VM using virt-install (1.4.1-2.hyperbola2)
virt-install --connect qemu:///system \
--name debian \
--ram 1024 \
--disk path=/home/test/debian.img,size=50 \
--vcpus 2 \
--os-type linux \
--os-variant generic \
--network bridge=virbr0 \
--graphics none \
--console pty,target_type=serial \
--location 'http://ftp.nl.debian.org/debian/dists/stretch/main/installer-amd64/' \
--extra-args 'console=ttyS0,115200n8 serial'
This error shows up : ERROR : ‘_OsVariant’ object has no attribute ‘urldistro’
I can’t create the VM.
PS : Error is not present on Debian Stretch with virt-install 1.4.0-5
Thanks for your help.
|
|
Packages | Stable | Bug Report | High | Critical | [vhba-module-lts] modprobe: ERROR: could not insert 'vh ... | Closed | |
Task Description
filename: /lib/modules/4.9.77-gnu-1-lts/extramodules/vhba.ko
license: GPL
description: Virtual SCSI HBA
version: 20161009
author: Chia-I Wu
srcversion: E5A3E6F70DFD436A6B1C8D6
depends: scsi_mod
vermagic: 4.9.27-gnu-1-lts SMP mod_unload modversions
Can’t insert module vhba
Error :
modprobe: ERROR: could not insert ‘vhba’: Exec format error
|
|
Packages | Stable | Bug Report | Medium | Critical | [v4l-utils] Error in `dvbv5-scan': double free or corru ... | Closed | |
Task Description
With : v4l-utils 1.12.3-1.hyperbola1
dvb5-scan utility currently segfaults with rtl2832
*** Error in `dvbv5-scan': double free or corruption (fasttop): 0x000000000090be90 ***
======= Backtrace: =========
/lib/libc.so.6(+0x727ad)[0x7f4f9a9657ad]
/lib/libc.so.6(+0x78e6f)[0x7f4f9a96be6f]
/lib/libc.so.6(+0x796ce)[0x7f4f9a96c6ce]
/usr/lib/libdvbv5.so.0(free_dvb_dev+0x13)[0x7f4f9acafa53]
/usr/lib/libdvbv5.so.0(dvb_dev_free_devices+0x28)[0x7f4f9acafaf8]
/usr/lib/libdvbv5.so.0(dvb_dev_free+0x4e)[0x7f4f9acafe2e]
dvbv5-scan[0x401729]
/lib/libc.so.6(__libc_start_main+0xf1)[0x7f4f9a9135a1]
dvbv5-scan[0x4019fa]
This seems to have been fixed, see :
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=859008
I don’t know if a patch is available for it though..
|
|
Packages | Stable | Bug Report | Medium | Medium | [udisks2] Impossible to mount ISO or IMG file | Closed | |
Task Description
When I try to mount an ISO file or IMG file (with right-click, “open with disk image mounter” on XFCE4) it fails, the following error message appears :
GDBus.Error.org.freedesktop.UDisks2.Error.Failed: Error opening /dev/loop-control: No such file or directory (udisks-error-quark, 0)
Thanks for your help
|
|
Packages | Stable | Bug Report | Medium | Critical | [torsocks] which: no getcap | Closed | |
Task Description
Current torsocks version is broken. It returns the following error when attempting to torify application :
which: no getcap
|
|
Packages | Any | Bug Report | Very Low | Critical | [system-config-printer] Impossible to print some pdfs ( ... | Closed | |
Task Description
Hello,
I’m unable to print some pdfs on my Hyperbola 3.0 system. Some background :
cups is installed, service enabled and working system-config-printer is installed and my printer has been correctly added.
I can print most pdfs and text files but recently with a pdf, it fails to print it.* And system-config-printer returned the following error (see capture) :
Printer "EPSON XP-620-Series" requires the '/usr/lib/cups/filters/epson-escpr-wrapper' but it is not currently installed.
Currently, “epson-escpr-wrapper” is installed but it is in :
/usr/libexec/cups/filters/epson-escpr-wrapper
Looking at source code of system-config-printer, it expects that wrapper to be installed in “/usr/lib/” so I tried to symlink that “epson-escpr-wrapper” to “/usr/lib/cups/filters” but it doesn’t work..
*With a Debian system and the exact same configuration, the “problematic” pdf prints just fine so it is not an issue with the pdf.
|
|
Packages | Any | Bug Report | Medium | Medium | [sshfs] Can't mount share from desktop (FUSE2 issue) | Closed | |
Task Description
Since 0.3 release, i’m unable to mount my sshfs share from my desktop.
For reference, my fstab entry :
sshfs#anon@server:/srv/nfs/data /mnt/data fuse noauto,user,_netdev,x-gvfs-show,x-gvfs-name=data 0 0
When I double-click on the desktop icon (xfce), it says : “Impossible to mount data”
But, I’m able to mount the share if I enter the command manually in a terminal as user.
sshfs anon@server:/srv/nfs/data /mnt/data
So, it is not a problem of writing rights on mountpoint /mnt/data I suspect an issue with fuse2 since it is a dependency of sshfs and it is in relation with mounting share from desktop.
|
|
Packages | Stable | Bug Report | Very Low | Critical | [smartmontools] update-smart-drivedb fails to update | Closed | |
Task Description
smartmontools 6.5-1.hyperbola1
Error while trying to update smart-drivedb :
anon@test[~] update-smart-drivedb
External Link/usr/bin/update-smart-drivedb: download from branches/RELEASE_6_5_DRIVEDB failed (curl: exit 23)
/usr/bin/update-smart-drivedb: download from trunk failed (curl: exit 23)
|
|
Packages | Stable | Bug Report | High | High | [qemu] add missing libseccomp dependency | Closed | |
Task Description
I cannot start qemu (2.9.0-1) on latest hyperbola stable release.
Error message : qemu-system-x86_64: error while loading shared libraries: libseccomp.so.2
Thanks for your help
|
|
Packages | Stable | Bug Report | Very Low | Critical | [python2-reportlab] python2-pip dependency | Closed | |
Task Description
Since python-pip and python2-pip have been removed, I can’t install python2-reportlab because python2-pip is a dependency of this package. .
|
|
Packages | Stable | Bug Report | High | High | [opencollada][openimageio][openshadinglanguage][ptex] s ... | Closed | |
Task Description
Hello,
I can’t install blender.
Error message :
erreur : opencollada: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid
:: Le fichier /var/cache/pacman/pkg/opencollada-1.6.45-1.hyperbola1-x86_64.pkg.tar.xz est corrompu (paquet invalide ou corrompu (signature PGP)).
Voulez-vous le supprimer ? [O/n] n
erreur : ptex: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid
:: Le fichier /var/cache/pacman/pkg/ptex-2.1.28-1.hyperbola1-x86_64.pkg.tar.xz est corrompu (paquet invalide ou corrompu (signature PGP)).
Voulez-vous le supprimer ? [O/n] n
erreur : openimageio: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid
:: Le fichier /var/cache/pacman/pkg/openimageio-1.6.18-1.hyperbola1-x86_64.pkg.tar.xz est corrompu (paquet invalide ou corrompu (signature PGP)).
Voulez-vous le supprimer ? [O/n] n
erreur : openshadinglanguage: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid
Already tried to refresh hyperbola keyring with :
pacman-key --populate hyperbola
pacman-key --refresh-keys
pacman -Sy hyperbola-keyring
Thanks for your help
|
|
Packages | Stable | Bug Report | Very Low | Low | [octopi][octopi-notifier] "Aborting notifier as 'pacman ... | Closed | |
Task Description
Hello,
octopi-notifier is not starting / running on my system, when I try to run it manually in a terminal, here is the output :
Aborting notifier as 'pacmanhelper' DBus service could not be found! [ "/usr/share/dbus-1/system-services/org.octopi.pacmanhelper.service" ]
I don’t know if this is applicable / related but I found this on aur website : https://aur.archlinux.org/packages/octopi/
kikadf :
Default build octopi-notifier without knotifications support. To enable edit PKGBUILD, uncomment #USE_NOTIFIER='1'
PS : I’m using XFCE4 autostart to start octopi-notifier (See screenshot attached)
|
|
Packages | Stable | Bug Report | Very Low | Medium | [nfs-utils] missing idmapd.conf | Closed | |
Task Description
Hello,
When mounting an NFS share, I get a warning about missing idmpad.conf
rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
4341: * Stopping idmapd ...
Debian includes a default config file for idmap :
[General]
Verbosity = 0
Pipefs-Directory = /run/rpc_pipefs
# set your own domain here, if id differs from FQDN minus hostname
# Domain = localdomain
[Mapping]
Nobody-User = nobody
Nobody-Group = nogroup
|
|
Packages | Stable | Bug Report | Medium | Critical | [mkinitcpio] crc32c_generic module missing with regular ... | Closed | |
Task Description
With latest 0.3 hyperbola, with the (simple) following partitioning :
/ (ext4)
/swap
The standard HOOK in /etc/mkinitcpio.conf
"HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
fails to include crc32c_generic module, resulting in non bootable system.
The generated fallback initramfs include it though.
The issue was not present with 0.2.9, with the exact same partitioning.
|
|
Packages | Stable | Bug Report | Medium | Critical | [lynis] Unable to run audit on remote target because of ... | Closed | |
Task Description
With lynis 2.4.8-1.hyperbola2
sudo lynis audit system remote 192.168.0.100
fails because dmidecode is not installed to /usr/sbin/ :
/usr/share/lynis/include/functions: line 1359: /usr/sbin/dmidecode: No such file or directory
With hyperbola 0.3 :
which dmidecode
/usr/bin/dmidecode
|
|
Packages | Stable | Bug Report | Very Low | High | [lm_sensors] Fail to load it87 module at boot | Closed | |
Task Description
Description:
I ran sensors-detect, it detected two modules :
coretemp it87
Those have been added to /etc/sysconfig/lm_sensors :
# This file is sourced by /etc/init.d/lm_sensors and defines the modules to
# be loaded/unloaded.
#
# The format of this file is a shell script that simply defines variables:
# HWMON_MODULES for hardware monitoring driver modules, and optionally
# BUS_MODULES for any required bus driver module (for example for I2C or SPI).
HWMON_MODULES="coretemp it87"
But only coretemp is loaded at boot.
I can manually load it87 module (modprobe it87) and get all sensors working but for some reason it87 module is not loaded at boot.
|
|
Packages | Stable | Bug Report | Medium | Medium | [linux-libre-lts] [i915] Display freeze : hpd interrupt ... | Closed | |
Task Description
Hello,
I recently acquired a T400 Thinkpad with 1440×900 panel. On this T400, I installed Hyperbola, just like on my x200 Thinkpad with 1280×800 panel.
Both Thinkpad are running the same Hyperbola installation :
Full disk encryption (with Libreboot) so both Thinkpad are using early KMS (MODULES=”i915” in /etc/mkinitcpio.conf) Same kernel : linux-libre-lts (4.9.99 at the moment I’m writing this message) video driver : modesetting DE : xfce4 with xfwm4
On the Thinkpad x200, everything works great, no issue to report.
On the T400 though, the linux-libre-lts kernel, I’m getting random display freezes, when it happens, this message appears in dmesg :
hpd interrupt storm detected on connector hdmi-a-1
And the display (and sound) freezes for 10 seconds (sometimes more !)
As Hyperbola proposes linux-libre-lts kernel only, I installed latest linux-libre-lts (4.14.40) and linux-libre (4.16.8) from Parabola GNU/Linux repo.
Results :
With 4.14.40 : Same issue as with 4.9.99 kernel from Hyperbola repo. With 4.16.8 : Issue is not present ! No more freeze !
I’m not sure how to proceed though. Would you be kind enough helping me to find which commit in i915 driver improved the situation ? If we find it, maybe it could be added as a patch to 4.9.x kernel series. Or maybe it is something else.. I don’t have much experience, I can provide logs if needed.
Thanks for your help
|
|
Packages | Any | Bug Report | High | High | [lightdm] is running under foreground mode and causing ... | Closed | |
Task Description
Since latest update, many of my service do not start automatically. (I can start them manually though) This cause multiple errors at shutdown as well.
udev [ started ]
localmount [ started ]
dbus [ started ]
elogind [ started ]
NetworkManager [ started ]
syslog-ng [ started ]
acpid [ started ]
dhcpcd [ started ]
avahi-daemon [ started ]
netmount [ started ]
lightdm [ starting ]
alsasound [ stopped ]
avahi-dnsconfd [ stopped ]
cronie [ stopped ]
cupsd [ stopped ]
fuse [ stopped ]
ntpd [ stopped ]
libvirtd [ stopped ]
openrc-settingsd [ stopped ]
sshd [ stopped ]
thinkfan [ stopped ]
local [ stopped ]
agetty.tty5 [ stopped ]
agetty.tty3 [ stopped ]
agetty.tty6 [ stopped ]
agetty.tty4 [ stopped ]
agetty.tty2 [ stopped ]
agetty.tty1 [ stopped ]
Dynamic Runlevel: hotplugged
Dynamic Runlevel: needed/wanted
modules-load [ started ]
lvmetad [ started ]
Before dbus update, everything was working fine.
Thanks for your help
|
|
Packages | Stable | Bug Report | Very Low | Low | [lightdm] Wrong locale displayed | Closed | |
Task Description
On a fresh install, the system wide locale is not working with lightdm. According to https://wiki.archlinux.org/index.php/LightDM#Wrong_locale_displayed
One needs to set the LANG variable in /etc/environment to have lightdm in desired language.
Example :
LANG=pt_PT.utf8
Could it be possible to implement a mechanism to automatically add the LANG variable set in /etc/locale.conf to /etc/environement when one install lightdm ?
It is not technically a bug but it could be handy to new users.
|
|
Packages | Stable | Bug Report | Medium | High | [lightdm-gtk-greeter-settings] pam_authenticate failed: ... | Closed | |
Task Description
Hello,
When running lightdm-gtk-greeter-settings-pkexec as user.
lightdm-gtk-greeter-settings-pkexec
==== AUTHENTICATING FOR com.ubuntu.pkexec.lightdm-gtk-greeter-settings ===
Authentication is required to run Settings editor for LightDM GTK+ Greeter
Authenticating as: root
polkit-agent-helper-1: pam_authenticate failed: Permission denied
==== AUTHENTICATION FAILED ===
Error executing command as another user: Not authorized
This incident has been reported.
Am I missing something ? Thanks for your help
groups for my username : sys disk wheel network video audio optical storage libvirt kvm users
|
|
Packages | Testing | Bug Report | Very Low | High | [iceweasel-uxp] recaptcha issue (webchat.freenode.net) | Closed | |
Task Description
recaptcha is not working on webchat.freenode.net (and probably other websites) with iceweasel-uxp (was working fine with iceweasel-esr)
https://framapic.org/ZdvYH2JCM39J/HFDSI7z0hXvS.png
|
|
Packages | Testing | Bug Report | Very Low | Critical | [iceweasel-uxp] missing extensions | Closed | |
Task Description
Hello,
I can’t manually install some extensions I was using successfully with iceweasel-esr (52.9.x) previously. Notably :
https-everywhere https://addons.mozilla.org/en-US/firefox/addon/https-everywhere/ watch-with-mpv https://addons.mozilla.org/en-US/firefox/addon/watch-with-mpv/ tampermonkey https://addons.mozilla.org/en-US/firefox/addon/tampermonkey/ Save URL to Wayback Machine https://addons.mozilla.org/en-US/firefox/addon/save-url-to-wayback-machine
How to install them with iceweasel-uxp ?
|
|
Packages | Stable | Bug Report | Very Low | Low | [iceweasel-uxp] info box not translated | Closed | |
Task Description
Hello,
With iceweasel-uxp, some info boxes are not translated, for now I noticed that when the mouse cursor hovers “add tab” element, the info box showing up is still using english (although I’m using French and the rest is ok), this is very, very minor issue I know.. :o)
See picture attached
|
|
Packages | Stable | Bug Report | Very High | Critical | [iceweasel-uxp] Broken addons with latest update | Closed | |
|
|
Packages | Testing | Bug Report | Medium | Critical | [iceweasel-uxp-ublock-origin] Can't add filters and/or ... | Closed | |
|
|
Packages | Any | Bug Report | Medium | Medium | [iceweasel-uxp-l10n] Impossible to remove saved login | Closed | |
|
|
Packages | Stable | Bug Report | Very Low | Critical | [hypervideo] YouTube's DRM has prevented this software ... | Closed | |
|
|
Packages | Stable | Bug Report | Medium | High | [gparted] gparted_polkit doesn't work | Closed | |
|
|
Packages | Any | Bug Report | High | High | [gnome-disk-utility] error while loading shared librari ... | Closed | |
|
|
Packages | Stable | Bug Report | High | High | [elogind] /usr/lib/udev/rules.d/73-seat-late.rules not ... | Closed | |
|
|
Packages | Stable | Bug Report | Very Low | Medium | [cowsay] perl-text-charwidth dependency missing | Closed | |
|
|
Packages | Stable | Bug Report | High | Critical | [alsa-tools] create missing firmware folder since firmw ... | Closed | |
|
|
Packages | Stable | Bug Report | Low | Medium | Garbled display with xfce4-terminal (terminfo) | Closed | |
|
|
Packages | Stable | Bug Report | Very Low | Medium | [kodi] "The Movie Database" scraper doesn't work | Closed | |
|
|
Packages | Stable | Bug Report | High | Critical | [gufw] FileNotFoundError: [Errno 2] '/usr/sbin/ufw': ' ... | Closed | |
|
|
Packages | Any | Drop Request | Very Low | Medium | [hardening-wrapper] deprecated, not needed anymore | Closed | |
|
|
Packages | Any | Feature Request | Medium | Medium | [iperf] needs OpenRC init script | Closed | |
|
|
Packages | Any | Feature Request | High | High | [icedove-enigmail] add package | Closed | |
|
|
Packages | Any | Feature Request | Medium | Medium | [gammu] needs OpenRC init script | Closed | |
|
|
Packages | Any | Feature Request | Medium | Medium | [create_ap] needs OpenRC init script | Closed | |
|
|
Packages | Any | Implementation Request | Very Low | Low | [xfce4-alsa-plugin] add package | Closed | |
|
|
Packages | Any | Implementation Request | Very Low | Low | [whipper] add package | Closed | |
|
|
Packages | Any | Implementation Request | Very Low | Low | [w_scan] add package | Closed | |
|
|
Packages | Any | Implementation Request | Very Low | Low | [vidcutter] add package | Closed | |
|
|
Packages | Any | Implementation Request | Very Low | Low | [ttf-font-awesome] add ttf-font-awesome font | Closed | |
|
|
Packages | Any | Implementation Request | Very Low | Low | [thinkfan] add package | Closed | |
|
|
Packages | Any | Implementation Request | Very Low | Low | [sayonara] add package | Closed | |
|
|
Packages | Any | Implementation Request | Very Low | Low | [sacd-extract] add package | Closed | |
|