All Projects

dmesg was showing errors about this
Apparently it is not needed and can be deleted. (No errors on my side after deletion (and reboot) and no more errors message)

See this thread : https://forum.manjaro.org/t/openrc-and-73-seat-late-rules-why-deleting-it-was-a-good-thing/24599

I cannot start qemu (2.9.0-1) on latest hyperbola stable release.

Error message : qemu-system-x86_64: error while loading shared libraries: libseccomp.so.2

Thanks for your help

Hello,

When running lightdm-gtk-greeter-settings-pkexec as user.

lightdm-gtk-greeter-settings-pkexec 
==== AUTHENTICATING FOR com.ubuntu.pkexec.lightdm-gtk-greeter-settings ===
Authentication is required to run Settings editor for LightDM GTK+ Greeter
Authenticating as: root
polkit-agent-helper-1: pam_authenticate failed: Permission denied
==== AUTHENTICATION FAILED ===
Error executing command as another user: Not authorized

This incident has been reported.

Am I missing something ? Thanks for your help

groups for my username : sys disk wheel network video audio optical storage libvirt kvm users

gnome-disks doesn’t start, error :

gnome-disks: error while loading shared libraries: libsystemd.so.0: cannot open shared object file: No such file or directory

Thanks for your help

Hello,

gparted_polkit doesn’t work, error message (polkit is installed on my system)

Error executing command as another user: No authentication agent found.

If using :

sudo gparted

or

gksu gparted

It works. By default with xfce, the gparted launcher uses gparted_polkit though.

Thanks for your help

Hello,

I can’t install blender.

Error message :

erreur : opencollada: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid
:: Le fichier /var/cache/pacman/pkg/opencollada-1.6.45-1.hyperbola1-x86_64.pkg.tar.xz est corrompu (paquet invalide ou corrompu (signature PGP)).
Voulez-vous le supprimer ? [O/n] n
erreur : ptex: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid
:: Le fichier /var/cache/pacman/pkg/ptex-2.1.28-1.hyperbola1-x86_64.pkg.tar.xz est corrompu (paquet invalide ou corrompu (signature PGP)).
Voulez-vous le supprimer ? [O/n] n
erreur : openimageio: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid
:: Le fichier /var/cache/pacman/pkg/openimageio-1.6.18-1.hyperbola1-x86_64.pkg.tar.xz est corrompu (paquet invalide ou corrompu (signature PGP)).
Voulez-vous le supprimer ? [O/n] n
erreur : openshadinglanguage: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid

Already tried to refresh hyperbola keyring with :

pacman-key --populate hyperbola
pacman-key --refresh-keys
pacman -Sy hyperbola-keyring

Thanks for your help

filename:       /lib/modules/4.9.77-gnu-1-lts/extramodules/vhba.ko
license:        GPL
description:    Virtual SCSI HBA
version:        20161009
author:         Chia-I Wu
srcversion:     E5A3E6F70DFD436A6B1C8D6
depends:        scsi_mod
vermagic:       4.9.27-gnu-1-lts SMP mod_unload modversions

Can’t insert module vhba

Error :

modprobe: ERROR: could not insert ‘vhba’: Exec format error

Since latest update, many of my service do not start automatically. (I can start them manually though)
This cause multiple errors at shutdown as well.

 udev                                                                                          [  started  ]
 localmount                                                                                    [  started  ]
 dbus                                                                                          [  started  ]
 elogind                                                                                       [  started  ]
 NetworkManager                                                                                [  started  ]
 syslog-ng                                                                                     [  started  ]
 acpid                                                                                         [  started  ]
 dhcpcd                                                                                        [  started  ]
 avahi-daemon                                                                                  [  started  ]
 netmount                                                                                      [  started  ]
 lightdm                                                                                       [ starting  ]
 alsasound                                                                                     [  stopped  ]
 avahi-dnsconfd                                                                                [  stopped  ]
 cronie                                                                                        [  stopped  ]
 cupsd                                                                                         [  stopped  ]
 fuse                                                                                          [  stopped  ]
 ntpd                                                                                          [  stopped  ]
 libvirtd                                                                                      [  stopped  ]
 openrc-settingsd                                                                              [  stopped  ]
 sshd                                                                                          [  stopped  ]
 thinkfan                                                                                      [  stopped  ]
 local                                                                                         [  stopped  ]
 agetty.tty5                                                                                   [  stopped  ]
 agetty.tty3                                                                                   [  stopped  ]
 agetty.tty6                                                                                   [  stopped  ]
 agetty.tty4                                                                                   [  stopped  ]
 agetty.tty2                                                                                   [  stopped  ]
 agetty.tty1                                                                                   [  stopped  ]
Dynamic Runlevel: hotplugged
Dynamic Runlevel: needed/wanted
 modules-load                                                                                  [  started  ]
 lvmetad                                                                                       [  started  ]

Before dbus update, everything was working fine.

Thanks for your help

On a fresh install, the system wide locale is not working with lightdm.
According to https://wiki.archlinux.org/index.php/LightDM#Wrong_locale_displayed

One needs to set the LANG variable in /etc/environment to have lightdm in desired language.

Example :

LANG=pt_PT.utf8

Could it be possible to implement a mechanism to automatically add the LANG variable set in /etc/locale.conf to /etc/environement when one install lightdm ?

It is not technically a bug but it could be handy to new users.

cowsay (cowsay-3.03-9.hyperbola1) is missing perl-text-charwidth dependency

Error message :

“Can’t locate Text/CharWidth.pm in @INC (you may need to install the Text::CharWidth module) (@INC contains: /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .) at /usr/bin/cowsay line 14.
BEGIN failed–compilation aborted at /usr/bin/cowsay line 14.”

After installing perl-text-charwidth, it works fine.

### Some context ###

I use hdajackretask on my G41M-ES2L motherboard (Libreboot)

Alsamixer doesn’t offer automute feature so every time I plug my headphones, the sound is playing by my speakers.
So to work around this, I use hdajackretask from alsa-tools package.

It allows to install a boot override to solve the issue.

Yesterday, I reinstalled Hyperbola on my system and the boot override because of missing /lib/firmware directory. (Although it was present before, something changed ?)

The error message was (I translate)

/mv: can't move '/tmp/hda-jack-retask-VH3KIZ/hda-jack-retask.fw' to /lib/firmware/hda-jack-retask.fw' No file or folder of this type

So I created a folder “firmware” in /lib/
and copied hda-jack-retask.fw in it.

Then I rebooted, 100% working.

I don’t know if the fix should apply to the PKGBUILD of alsa-tools (to create a /lib/firmware directory) or something else ?

Hello,

I recently acquired a T400 Thinkpad with 1440×900 panel.
On this T400, I installed Hyperbola, just like on my x200 Thinkpad with 1280×800 panel.

Both Thinkpad are running the same Hyperbola installation :

Full disk encryption (with Libreboot) so both Thinkpad are using early KMS (MODULES=”i915” in /etc/mkinitcpio.conf)
Same kernel : linux-libre-lts (4.9.99 at the moment I’m writing this message)
video driver : modesetting
DE : xfce4 with xfwm4

On the Thinkpad x200, everything works great, no issue to report.

On the T400 though, the linux-libre-lts kernel, I’m getting random display freezes, when it happens, this message appears in dmesg :

hpd interrupt storm detected on connector hdmi-a-1

And the display (and sound) freezes for 10 seconds (sometimes more !)

As Hyperbola proposes linux-libre-lts kernel only, I installed latest linux-libre-lts (4.14.40) and linux-libre (4.16.8) from Parabola GNU/Linux repo.

Results :

With 4.14.40 : Same issue as with 4.9.99 kernel from Hyperbola repo.
With 4.16.8 : Issue is not present ! No more freeze !

I’m not sure how to proceed though. Would you be kind enough helping me to find which commit in i915 driver improved the situation ? If we find it, maybe it could be added as a patch to 4.9.x kernel series.
Or maybe it is something else.. I don’t have much experience, I can provide logs if needed.

Thanks for your help

Hello,

When mounting an NFS share, I get a warning about missing idmpad.conf

rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
4341: * Stopping idmapd ...

Debian includes a default config file for idmap :

[General]

Verbosity = 0
Pipefs-Directory = /run/rpc_pipefs
# set your own domain here, if id differs from FQDN minus hostname
# Domain = localdomain

[Mapping]

Nobody-User = nobody
Nobody-Group = nogroup

I can’t update filters or update with iceweasel-uxp-ublock-origin.
When I toggle the additional filters list, it is empty.

recaptcha is not working on webchat.freenode.net (and probably other websites) with iceweasel-uxp (was working fine with iceweasel-esr)

https://framapic.org/ZdvYH2JCM39J/HFDSI7z0hXvS.png

Hello,

I can’t manually install some extensions I was using successfully with iceweasel-esr (52.9.x) previously.
Notably :

https-everywhere https://addons.mozilla.org/en-US/firefox/addon/https-everywhere/ watch-with-mpv https://addons.mozilla.org/en-US/firefox/addon/watch-with-mpv/ tampermonkey https://addons.mozilla.org/en-US/firefox/addon/tampermonkey/ Save URL to Wayback Machine https://addons.mozilla.org/en-US/firefox/addon/save-url-to-wayback-machine

How to install them with iceweasel-uxp ?

Trying to create a VM using virt-install (1.4.1-2.hyperbola2)

virt-install --connect qemu:///system \
--name debian \
--ram 1024 \
--disk path=/home/test/debian.img,size=50 \
--vcpus 2 \
--os-type linux \
--os-variant generic \
--network bridge=virbr0 \
--graphics none \
--console pty,target_type=serial \
--location 'http://ftp.nl.debian.org/debian/dists/stretch/main/installer-amd64/' \
--extra-args 'console=ttyS0,115200n8 serial'

This error shows up :
ERROR : ‘_OsVariant’ object has no attribute ‘urldistro’

I can’t create the VM.

PS : Error is not present on Debian Stretch with virt-install 1.4.0-5

Thanks for your help.

Description:

I ran sensors-detect, it detected two modules :

coretemp
it87

Those have been added to /etc/sysconfig/lm_sensors :

# This file is sourced by /etc/init.d/lm_sensors and defines the modules to
# be loaded/unloaded.
#
# The format of this file is a shell script that simply defines variables:
# HWMON_MODULES for hardware monitoring driver modules, and optionally
# BUS_MODULES for any required bus driver module (for example for I2C or SPI).

HWMON_MODULES="coretemp it87"

But only coretemp is loaded at boot.

I can manually load it87 module (modprobe it87) and get all sensors working but for some reason it87 module is not loaded at boot.

Hello,

With iceweasel-uxp, some info boxes are not translated, for now I noticed that when the mouse cursor hovers “add tab” element, the info box showing up is still using english (although I’m using French and the rest is ok), this is very, very minor issue I know.. :o)

See picture attached

Previously (with iceweasel), when I was saving a login for a website, I was able to remove it in :

Preferences → Security > Logins > Saved logins

With iceweasel-uxp, when I click on “saved logins”, it opens a box but it is empty, I can’t remove saved login. (They are saved because iceweasel-uxp suggests me to use the saved login for concerned website)

When I try to mount an ISO file or IMG file (with right-click, “open with disk image mounter” on XFCE4) it fails, the following error message appears :

GDBus.Error.org.freedesktop.UDisks2.Error.Failed: Error opening /dev/loop-control: No such file or directory (udisks-error-quark, 0)

Thanks for your help

Hello,

octopi-notifier is not starting / running on my system, when I try to run it manually in a terminal, here is the output :

Aborting notifier as 'pacmanhelper' DBus service could not be found! [ "/usr/share/dbus-1/system-services/org.octopi.pacmanhelper.service" ]

I don’t know if this is applicable / related but I found this on aur website : https://aur.archlinux.org/packages/octopi/

kikadf :

Default build octopi-notifier without knotifications support. To enable edit PKGBUILD, uncomment #USE_NOTIFIER='1'

PS : I’m using XFCE4 autostart to start octopi-notifier (See screenshot attached)

A very nasty bug I wasn’t able to find an answer to.
I compiled stuff (buildroot) using menuconfig, the menu display was fine in xfce4-terminal (See screenshot #1)
I restarted the config a few days later with the same command :

$ make menuconfig

and this time the display was messed up (See screenshot #2)

After investigation, I noticed a directory (filled with stuff) have been created in my home folder :

.terminfo

I don’t know why. But anyway, if I delete it, then the display is ok again.
I noticed that if I use good old xterm terminal, then the display is fine even if the .terminfo directory is present. (it uses “xterm” instead of xterm-256color)

But, with xfce4-terminal (and others, I tried with gnome-terminal, sakura..), the display is messed up if the .terminfo directory is present in my home folder.

I also noticed that if I run the command in a screen session, the issue is not present.

(I open xfce4-terminal)

$ screen
$ printenv TERM
screen.xterm-256color
$ make menuconfig (or htop, or other program using ncurses)

= display ok

but with default :

(I open xfce4-terminal)

$ printenv TERM
xterm-256color
make menuconfig (or htop, or other program using ncurses)

= display messed up if .terminfo directory is present

So I have no idea why this .terminfo directory is generated. What could trigger its generation ? Is that an issue with ncurses or something else ?

Thanks for your help

With the recent update to hypervideo, my workflow is broken as I can’t archive several youtube channels with hypervideo, the error is always the following :

WARNING: unable to extract html5 player; please report this issue on https://issues.hyperbola.info/ . Make sure you are using the latest version; type 'pacman -Sy hypervideo' as root. Be sure to call hypervideo with the --verbose flag and include its complete output.
[youtube] {22} signature length 44.40, html5 player None
ERROR: Signature extraction failed: Traceback (most recent call last):
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1194, in _decrypt_signature
    video_id, player_url, s
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1127, in _extract_signature_function
    raise ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL", expected=True)
hypervideo.utils.ExtractorError: YouTube's DRM has prevented this software from obtaining the video URL
 (caused by ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL",)); please report this issue on https://issues.hyperbola.info/ . Make sure you are using the latest version; type 'pacman -Sy hypervideo' as root. Be sure to call hypervideo with the --verbose flag and include its complete output.
Traceback (most recent call last):
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1194, in _decrypt_signature
    video_id, player_url, s
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1127, in _extract_signature_function
    raise ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL", expected=True)
hypervideo.utils.ExtractorError: YouTube's DRM has prevented this software from obtaining the video URL
Traceback (most recent call last):
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1194, in _decrypt_signature
    video_id, player_url, s
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1127, in _extract_signature_function
    raise ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL", expected=True)
hypervideo.utils.ExtractorError: YouTube's DRM has prevented this software from obtaining the video URL

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3.6/site-packages/hypervideo/YoutubeDL.py", line 792, in extract_info
    ie_result = ie.extract(url)
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/common.py", line 508, in extract
    ie_result = self._real_extract(url)
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1806, in _real_extract
    encrypted_sig, video_id, player_url, age_gate)
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1204, in _decrypt_signature
    'Signature extraction failed: ' + tb, cause=e)
hypervideo.utils.ExtractorError: Signature extraction failed: Traceback (most recent call last):
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1194, in _decrypt_signature
    video_id, player_url, s
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1127, in _extract_signature_function
    raise ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL", expected=True)
hypervideo.utils.ExtractorError: YouTube's DRM has prevented this software from obtaining the video URL
 (caused by ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL",)); please report this issue on https://issues.hyperbola.info/ . Make sure you are using the latest version; type 'pacman -Sy hypervideo' as root. Be sure to call hypervideo with the --verbose flag and include its complete output.

Since python-pip and python2-pip have been removed, I can’t install python2-reportlab because python2-pip is a dependency of this package.
.