All Projects

ProjectCategoryTask TypePrioritySeveritySummaryStatus  descProgress
Software DevelopmentGeneralImplementation RequestVery HighCriticalPOWER (ppc64le) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and the Power9-based Talos II promises to be a great architecture example for workstations and servers environments where Hyperbola is focused since is a fully free long-term support distribution.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the POWER architecture (power64le).

NOTE: POWER porting is focused only for Hyperbola GNU/Linux-libre .

Software DevelopmentGeneralImplementation RequestVery HighCriticalARM (aarch and armv7h) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and ARM A7/A53 promises to be a great architecture example for low-power computers, laptops and embedded systems.

NOTE: ARM porting is focused only for HyperbolaBSD .

Software DevelopmentGeneralImplementation RequestDeferCriticalRISC-V (riscv64) porting + multilib supportDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and RISC-V promises to be a great architecture example for low-power computers, laptops and embedded systems, also as ARM architecture replacement.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the RISC-V architecture (riscv64) with multilib support.

NOTE: RISC-V porting is focused only for Hyperbola GNU/Linux-libre .

PackagesStableUpdate RequestHighHigh[qt5] upgrade Qt project to the 5.6 LTS version, requir...Deferred
0%
Task Description

Cannot mix incompatible Qt library (version 0×50800) with this library (version 0×50904)
Aborted

./Nextcloud-2.3.3-x86_64.AppImage: /usr/lib/libQt5Core.so.5: version `Qt_5.9’ not found (required by /tmp/.mount_NextclpprMnG/usr/bin/../lib/libqt5keychain.so.1

These two packages are directly affected by an older qt5...

Could you update all the qt packages to the LTS version available?

PackagesAnyBug ReportDeferHigh[texlive-most] cannot export LaTeX - input csr10' fail...Deferred
50%
Task Description

I was using GNU Emacs, and tried to export LaTeX file or make a PDF. It seems that texlive package is broken, some fonts are missing.

The group named texlive-most cannot be properly installed.

admin→ pacsearch texlive

extra/texlive-bibtexextra 2016.43765-1 (texlive-most)
    TeX Live - Additional BibTeX styles and bibliography databases
extra/texlive-bin 2016.41290-12.hyperbola1 [installed]
    TeX Live binaries (Hyperbola rebranded)
extra/texlive-core 2016.43757-1.hyperbola2 (texlive-most) [installed]
    TeX Live core distribution, without nonfree add-on packages (Hyperbola rebranded)
extra/texlive-fontsextra 2016.43763-1.hyperbola2 (texlive-most) [installed]
    TeX Live - all sorts of extra fonts, without nonfree add-on packages
extra/texlive-formatsextra 2016.41438-3 (texlive-most) [installed]
    TeX Live - collection of extra TeX 'formats'
extra/texlive-games 2016.43415-1 (texlive-most)
    TeX Live - Setups for typesetting various board games, including chess
extra/texlive-genericextra 2016.43605-1 (texlive-most) [installed]
    TeX Live - mixed bag of generic macro packages and fonts
extra/texlive-htmlxml 2016.43769-1 (texlive-most)
    TeX Live - Packages to convert LaTeX to XML/HTML, and typeset XML/SGML
extra/texlive-humanities 2016.43711-1 (texlive-most)
    TeX Live - LaTeX packages for law, linguistics, social sciences, and humanities
extra/texlive-langchinese 2016.43669-1 (texlive-lang)
    TeX Live - Fonts and macro packages to typeset Chinese texts
extra/texlive-langcjk 2014.0-1
    TeX Live - CJK (Chinese, Japanese, Korean) metapackage
extra/texlive-langcyrillic 2016.43417-1 (texlive-lang)
    TeX Live - Fonts and macro packages to typeset Cyrillic texts
extra/texlive-langextra 2016.43739-1 (texlive-lang)
    TeX Live - Bundle of all extra language support
extra/texlive-langgreek 2016.43222-1 (texlive-lang)
    TeX Live - Fonts and support for typesetting Greek
extra/texlive-langjapanese 2016.43741-1 (texlive-lang)
    TeX Live - Fonts and macro packages to typeset Japanese texts
extra/texlive-langkorean 2016.43130-1 (texlive-lang)
    TeX Live - Fonts and macro packages to typeset Korean texts
extra/texlive-latexextra 2016.43768-1.hyperbola2 (texlive-most) [installed]
    TeX Live - Large collection of add-on packages for LaTeX, without nonfree add-on packages
extra/texlive-music 2016.43375-1 (texlive-most)
    TeX Live - Music typesetting packages
extra/texlive-pictures 2016.43767-1 (texlive-most) [installed]
    TeX Live - Packages for drawings graphics
extra/texlive-plainextra 2016.43137-1 (texlive-most) [installed]
    TeX Live - A collection of add-on packages and macros for plain TeX
extra/texlive-pstricks 2016.43710-1 (texlive-most) [installed]
    TeX Live - Additional PSTricks packages
extra/texlive-publishers 2016.43764-1 (texlive-most)
    TeX Live - LaTeX classes and packages for specific publishers
extra/texlive-science 2016.43747-1 (texlive-most)
    TeX Live - Typesetting for mathematics, natural and computer sciences

[~]
admin→ sudo pacman -S texlive-most

:: There are 15 members in group texlive-most:
:: Repository extra
   1) texlive-bibtexextra  2) texlive-core  3) texlive-fontsextra  4) texlive-formatsextra  5) texlive-games  6) texlive-genericextra
   7) texlive-htmlxml  8) texlive-humanities  9) texlive-latexextra  10) texlive-music  11) texlive-pictures  12) texlive-plainextra
   13) texlive-pstricks  14) texlive-publishers  15) texlive-science

Enter a selection (default=all):
warning: texlive-core-2016.43757-1.hyperbola2 is up to date -- reinstalling
warning: texlive-fontsextra-2016.43763-1.hyperbola2 is up to date -- reinstalling
warning: texlive-formatsextra-2016.41438-3 is up to date -- reinstalling
warning: texlive-genericextra-2016.43605-1 is up to date -- reinstalling
warning: texlive-latexextra-2016.43768-1.hyperbola2 is up to date -- reinstalling
warning: texlive-pictures-2016.43767-1 is up to date -- reinstalling
warning: texlive-plainextra-2016.43137-1 is up to date -- reinstalling
warning: texlive-pstricks-2016.43710-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...

Packages (15) texlive-bibtexextra-2016.43765-1  texlive-core-2016.43757-1.hyperbola2  texlive-fontsextra-2016.43763-1.hyperbola2
              texlive-formatsextra-2016.41438-3  texlive-games-2016.43415-1  texlive-genericextra-2016.43605-1
              texlive-htmlxml-2016.43769-1  texlive-humanities-2016.43711-1  texlive-latexextra-2016.43768-1.hyperbola2
              texlive-music-2016.43375-1  texlive-pictures-2016.43767-1  texlive-plainextra-2016.43137-1  texlive-pstricks-2016.43710-1
              texlive-publishers-2016.43764-1  texlive-science-2016.43747-1

Total Download Size:     27.66 MiB
Total Installed Size:  1300.90 MiB
Net Upgrade Size:       110.88 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 texlive-bibtexextra-2016.43765-1-any                   1541.4 KiB   275K/s 00:06 [###############################################] 100%
 texlive-games-2016.43415-1-any                          416.5 KiB   356K/s 00:01 [###############################################] 100%
 texlive-htmlxml-2016.43769-1-any                       1197.6 KiB   300K/s 00:04 [###############################################] 100%
 texlive-humanities-2016.43711-1-any                     299.0 KiB   664K/s 00:00 [###############################################] 100%
 texlive-music-2016.43375-1-any                           12.2 MiB   398K/s 00:31 [###############################################] 100%
 texlive-publishers-2016.43764-1-any                       9.2 MiB   471K/s 00:20 [###############################################] 100%
 texlive-science-2016.43747-1-any                          2.9 MiB   376K/s 00:08 [###############################################] 100%
(15/15) checking keys in keyring                                                  [###############################################] 100%
(15/15) checking package integrity                                                [###############################################] 100%
(15/15) loading package files                                                     [###############################################] 100%
(15/15) checking for file conflicts                                               [###############################################] 100%
(15/15) checking available disk space                                             [###############################################] 100%
:: Processing package changes...
( 1/15) reinstalling texlive-core                                                 [###############################################] 100%
>>> updmap custom entries should go into /etc/texmf/web2c/updmap-local.cfg
>>> fmtutil custom entries should go into /etc/texmf/web2c/fmtutil-local.cnf
( 2/15) installing texlive-bibtexextra                                            [###############################################] 100%
( 3/15) reinstalling texlive-fontsextra                                           [###############################################] 100%
( 4/15) reinstalling texlive-formatsextra                                         [###############################################] 100%
( 5/15) installing texlive-games                                                  [###############################################] 100%
( 6/15) reinstalling texlive-genericextra                                         [###############################################] 100%
( 7/15) installing texlive-htmlxml                                                [###############################################] 100%
( 8/15) reinstalling texlive-latexextra                                           [###############################################] 100%
( 9/15) installing texlive-humanities                                             [###############################################] 100%
Optional dependencies for texlive-humanities
    texlive-pictures: for package qtree [installed]
(10/15) installing texlive-music                                                  [###############################################] 100%
Optional dependencies for texlive-music
    python2: for scripts from the lilyglyphs packages [installed]
(11/15) reinstalling texlive-pictures                                             [###############################################] 100%
(12/15) reinstalling texlive-plainextra                                           [###############################################] 100%
(13/15) reinstalling texlive-pstricks                                             [###############################################] 100%
(14/15) installing texlive-publishers                                             [###############################################] 100%
(15/15) installing texlive-science                                                [###############################################] 100%
Optional dependencies for texlive-science
    python2-pygments: for pygmentex
:: Running post-transaction hooks...
(1/3) Updating TeXLive filename database...
(2/3) Updating TeXLive format files...

kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf csr10

! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.

kpathsea: Running mktextfm ecrm1000
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf ecrm1000

! I can't find file `ecrm1000'.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000

Please type another input file name
! Emergency stop.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000

Transcript written on mfput.log.
grep: ecrm1000.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000' failed to make ecrm1000.tfm.
kpathsea: Appending font creation commands to missfont.log.

kpathsea: Running mktextfm ecrm1000
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf ecrm1000

! I can't find file `ecrm1000'.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000

Please type another input file name
! Emergency stop.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000

Transcript written on mfput.log.
grep: ecrm1000.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000' failed to make ecrm1000.tfm.
kpathsea: Appending font creation commands to missfont.log.

kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf csr10

! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.

kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf csr10

! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.
fmtutil [ERROR]: running `pdftex -ini   -jobname=utf8mex -progname=utf8mex -enc *utf8mex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [WARNING]: inifile pdfmex.ini for pdfmex/pdftex not found.
fmtutil [ERROR]: running `pdftex -ini   -jobname=csplain -progname=csplain -etex -enc csplain-utf8.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini   -jobname=pdfjadetex -progname=pdfjadetex *pdfjadetex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini   -jobname=jadetex -progname=jadetex *jadetex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [WARNING]: inifile mex.ini for mex/pdftex not found.
fmtutil [ERROR]: running `xetex -ini   -jobname=pdfcsplain -progname=pdfcsplain -etex csplain.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini   -jobname=pdfcsplain -progname=pdfcsplain -etex -enc csplain-utf8.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `luatex -ini   -jobname=pdfcsplain -progname=pdfcsplain -etex csplain.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
error: command failed to execute correctly
(3/3) Updating TeXLive font maps...
[~]
a
PackagesAnyImplementation RequestMediumMedium[ncdu] add new packageDeferred
0%
Task Description

PKGBUILD

# $Id: PKGBUILD 187611 2016-08-26 15:44:01Z bisson $
# Contributor: lp76 <l.peduto@gmail.com>
# Contributor: Daenyth <Daenyth+Arch AT gmail DOT com>
# Maintainer: Gaetan Bisson <bisson@archlinux.org>

pkgname=ncdu
pkgver=1.12
pkgrel=1.hyperbola1
pkgdesc='Disk usage analyzer with an ncurses interface'
url='https://dev.yorhel.nl/ncdu'
license=('custom:MIT')
depends=('ncurses')
arch=('i686' 'x86_64')
validpgpkeys=('74460D32B80810EBA9AFA2E962394C698C2739FA')
source=("https://dev.yorhel.nl/download/${pkgname}-${pkgver}.tar.gz"{,.asc})
sha512sums=('20620dd79d2af878442769e097f13806f64f23875dcb85ebccd573a3de43aba5663d496049b64015d13f9a79d624298032c008ef61dfb6f61d8b12902b8dca12'
            'SKIP')

build() {
    cd "${srcdir}/${pkgname}-${pkgver}"
    ./configure --prefix=/usr
    make
}

package() {
    cd "${srcdir}/${pkgname}-${pkgver}"
    make DESTDIR="${pkgdir}" install
    install -Dm644 COPYING "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
}
PackagesAnyImplementation RequestMediumMedium[searx] add new packageDeferred
0%
Task Description

Hi André, you could make an init for the searx search engine, it happens that
I want to launch it from local to avoid being in searx.me or
searx.riseup.net.

I have seen that there is a PKGBUILD in AUR [0]. I think it is necessary to make one with the init Openrc

[0]: https://aur.archlinux.org/packages/searx-py3/

PackagesTestingImplementation RequestVery LowMedium[yaics] add packageDeferred
0%
Task Description

Yaics is a simple GNU social client written in C++ and Qt and licensed under the GNU GPL 3.0 (or later).

Please implement yaics as an optional package.

https://stigatle.no/yaics/

https://gitlab.com/stigatle/yaics

PackagesStableBug ReportMediumMedium[linux-libre-lts] [i915] Display freeze : hpd interrupt...Deferred
0%
Task Description

Hello,

I recently acquired a T400 Thinkpad with 1440×900 panel.
On this T400, I installed Hyperbola, just like on my x200 Thinkpad with 1280×800 panel.

Both Thinkpad are running the same Hyperbola installation :

Full disk encryption (with Libreboot) so both Thinkpad are using early KMS (MODULES=”i915” in /etc/mkinitcpio.conf)
Same kernel : linux-libre-lts (4.9.99 at the moment I’m writing this message)
video driver : modesetting
DE : xfce4 with xfwm4

On the Thinkpad x200, everything works great, no issue to report.

On the T400 though, the linux-libre-lts kernel, I’m getting random display freezes, when it happens, this message appears in dmesg :

hpd interrupt storm detected on connector hdmi-a-1

And the display (and sound) freezes for 10 seconds (sometimes more !)

As Hyperbola proposes linux-libre-lts kernel only, I installed latest linux-libre-lts (4.14.40) and linux-libre (4.16.8) from Parabola GNU/Linux repo.

Results :

With 4.14.40 : Same issue as with 4.9.99 kernel from Hyperbola repo.
With 4.16.8 : Issue is not present ! No more freeze !

I’m not sure how to proceed though. Would you be kind enough helping me to find which commit in i915 driver improved the situation ? If we find it, maybe it could be added as a patch to 4.9.x kernel series.
Or maybe it is something else.. I don’t have much experience, I can provide logs if needed.

Thanks for your help

PackagesTestingImplementation RequestMediumMediumlinux-libre-lts-hypersec: New package with extra securi...Deferred
0%
Task Description

Description: Per a user request and to better secure the kernel, we can embed the cryptsetup and ciphers in the kernel. This would mean rather than exposed modules, they are built-in to the kernel and ready to use even without an intramfs.

To be embedded: ciphers aes, twofish, serpent; sha256, sha512 - and the necessary modules (don’t forget the block modes xts, lvm and cryptsetup ...)

Additionally, we could include USB Guard and any other features that meet our social contract and security outlook.

PackagesAnyFeature RequestVery LowLow[i3lock-color] adding package into pacmanDeferred
0%
Task Description

We already have i3lock, this version is an enhanced version available in Arch AUR:
https://aur.archlinux.org/packages/i3lock-color https://aur.archlinux.org/packages/i3lock-color-git/

PackagesTestingImplementation RequestVery LowLow[sirikata] add packageDeferred
0%
Task Description

Sirikata a platform for virtual worlds.

Sirikata is a platform for virtual worlds. We provide a set of libraries and protocols which can be used to deploy a virtual world, as well as fully featured sample implementations of services for hosting and deploying these worlds.

Please implement sirikata as an optional package.

PackagesAnyImplementation RequestVery LowLow[multipath-tools] add packageDeferred
0%
Task Description

Hello,

Could it be possible to add this package :

multipath-tools

“Multipath tools for Linux (including kpartx)”

License : GPL2

to the repo ?

Thank you

PackagesAnyImplementation RequestVery LowLow[thinkfan] add packageDeferred
0%
Task Description

Could it be possible to add this package :

thinkfan

“A minimalist fan control program. Supports the sysfs hwmon interface and thinkpad_acpi”

License : GPL

to the repo ?

Thanks

PackagesAnyFreedom IssueMediumLow[aiksaurus] vague terminology "Open Source" in descript...Deferred
0%
Task Description

This package contains vague terminology “Open Source”:

extra/aiksaurus 1.2.1-5
    A cross-platform, open-source thesaurus

According to:
https://www.gnu.org/distros/free-system-distribution-guidelines.html

We shall avoid vague terminology such as “Open Source”, please see here:
https://www.gnu.org/philosophy/words-to-avoid.html#Open

It would be good example to set to have proper description of packages without using “Open Source”.

eg.

A cross-platform, free-software thesaurus
PackagesAnyFreedom IssueMediumLow[assimp] vague terminology "Open Source" in description...Deferred
0%
Task Description

This package contains vague terminology “Open Source”:

extra/assimp 3.3.1-1
    Portable Open Source library to import various well-known 3D model formats in an uniform manner

According to:
https://www.gnu.org/distros/free-system-distribution-guidelines.html

We shall avoid vague terminology such as “Open Source”, please see here:
https://www.gnu.org/philosophy/words-to-avoid.html#Open

It would be good example to set to have proper description of packages without using “Open Source”.

eg.

Portable Free Software library to import various well-known 3D model formats in an uniform manner
PackagesAnyFeature RequestVery LowVery Low[ttf-iosevka] add Iosevka fontDeferred
0%
Task Description

Iosevka wins a poll about most beautiful fonts on reddit (/r/linux). This font is very similar than Droid Sans (Official Google Font) with many advantages:

1 - Has 5 types modes (lightest, light, normal, bold, super bold)
2 - Condensed and big sizes (perfect for visual impairments users)
3 - Very Legible on i3-wm, Sway, Conky bar
4 - OTF license (Freedom license)

Iosevka is already on AUR, but create a official package prevent bug or proprietary third parties apps (Yaourt, etc) be installed by beginners Hyperbola users.

Official Site:
https://github.com/be5invis/Iosevka

On AUR:
https://aur.archlinux.org/packages/ttf-iosevka

PackagesStableBug ReportVery LowVery Low[spamassassin] has different directory permissions than...Deferred
0%
Task Description

Description:
The /usr/sbin directory in spamassassin has permissions 755
https://git.hyperbola.info:50100/packages/extra.git/tree/spamassassin/PKGBUILD#n88

And ‘filesystem’ sets it to 750
https://git.hyperbola.info:50100/packages/core.git/tree/filesystem/PKGBUILD#n135

So when installing spamassassin, pacman throws a warning

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

Additional info:
* spamassassin 3.4.2-1.hyperbola2

PackagesStableBug ReportVery LowVery Low[postfix] has different directory permissions than 'fil...Deferred
0%
Task Description

Description:
The /usr/sbin directory in postfix has permissions 755
https://git.hyperbola.info:50100/packages/extra.git/tree/postfix/PKGBUILD#n115

And ‘filesystem’ sets it to 750
https://git.hyperbola.info:50100/packages/core.git/tree/filesystem/PKGBUILD#n135

So when installing postfix, pacman throws a warning

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

Additional info:
* postfix-3.2.2-1.hyperbola6

PackagesAnySecurity IssueVery HighCritical[avahi] blacklist package since it's a zeroconf impleme...In Progress
0%
Task Description

Avahi is a zero-configuration networking implementation that contains critical security issues because mDNS operates under a different trust model than unicast DNS trusting the entire network rather than a designated DNS server, it is vulnerable to spoofing attacks by any system within the multicast IP range. Like SNMP and many other network management protocols, it can also be used by attackers to quickly gain detailed knowledge of the network and its machines. [0]

Since it violates the Hyperbola Social Contract , Avahi should be blacklisted.

Software DevelopmentHyperBKImplementation RequestVery HighCriticalDevelop a BSD descendant kernel for HyperbolaBSDIn Progress
30%
Task Description

Develop HyperBK (Hyper Berkeley Kernel), a BSD descendant kernel with GPL-compatible licenses preserved, non-compatible ones removed, and new code written under GPL-3 for HyperbolaBSD.

TODO:

  • Download OpenBSD kernel source code from OpenBSD siteDONE
  • Download LibertyBSD scripts to deblob and rebrand kernel from their scripts. → DONE
  • Push source to HyperBK’s project. → DONE
  • Rebrand OpenBSD kernel to HyperbolaBSD with LibertyBSD scripts. → DONE
  • Rebrand entire code (functions, variable, pointers, etc) under HyperbolaBSD → DONE
  • Remove files under non GPL-compatible licenses → DONE
  • Import code from another BSD systems under GPL-compatible licenses → IN PROGRESS
  • Write new code under GPL-3 → IN PROGRESS
  • Package HyperBK for HyperbolaBSD.

PATCHING NOTE

When the check concerns kernel, we obviously want to match with HyperbolaBSD.

Example of triplet check:	hyperbolabsd)
Example of uname -s check:	HyperbolaBSD)
Example of uname -r check:	0.1)
Example of C macro check:	defined(__HyperbolaBSD__)
PackagesAnyFeature RequestVery HighHigh[sage-notebook] contains systemd unit fileIn Progress
30%
Task Description

Description:

  • The Arch version of Sage-notebook from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required. OpenRC init script replacement isn’t possible here because Sage-notebook is using a systemd unit file adapted for users instead of system users.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : sage-notebook
Version         : 0.13-4
Description     : Browser-based notebook interface for SageMath
Architecture    : any
URL             : http://www.sagemath.org
Licenses        : GPL3
Groups          : None
Provides        : None
Depends On      : sagemath  python2-twisted  python2-flask-oldsessions  python2-flask-openid  python2-flask-autoindex  python2-flask-babel  mathjax
Optional Deps   : python2-pyopenssl: to use the notebook in secure mode
Conflicts With  : None
Replaces        : None
Download Size   : 1625.00 KiB
Installed Size  : 9154.00 KiB
Packager        : Antonio Rojas <arojas@archlinux.org>
Build Date      : Thu 04 May 2017 06:12:28 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
/usr/lib/systemd/user/sage.service is owned by sage-notebook 0.13-4

Steps to reproduce:

  • Install package.
PackagesAnyFeature RequestVery HighHigh[erlang-nox] contains systemd unit filesIn Progress
0%
Task Description

Description:

  • The Arch version of Erlang (headless version) from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : erlang-nox
Version         : 19.3-3
Description     : General-purpose concurrent functional programming language developed by Ericsson (headless version)
Architecture    : x86_64
URL             : http://www.erlang.org/
Licenses        : Apache
Groups          : None
Provides        : None
Depends On      : ncurses  openssl
Optional Deps   : erlang-unixodbc: database support
                  java-environment: for Java support
                  lksctp-tools: for SCTP support
Conflicts With  : erlang
Replaces        : None
Download Size   : 39.01 MiB
Installed Size  : 106.73 MiB
Packager        : Jan de Groot <jgc@archlinux.org>
Build Date      : Fri 28 Apr 2017 08:44:33 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
/usr/lib/systemd/system/epmd.service is owned by erlang-nox 19.3-3
/usr/lib/systemd/system/epmd.socket is owned by erlang-nox 19.3-3

Steps to reproduce:

  • Install package.
PackagesAnyFeature RequestVery HighHigh[motion] contains systemd unit fileIn Progress
0%
Task Description

Description:

  • The Arch version of Motion from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : motion
Version         : 4.0.1-2
Description     : A software motion detector which grabs images from video4linux devices and/or from webcams
Architecture    : x86_64
URL             : http://www.lavrsen.dk/foswiki/bin/view/Motion/WebHome
Licenses        : GPL
Groups          : None
Provides        : None
Depends On      : libjpeg  v4l-utils  ffmpeg
Optional Deps   : None
Conflicts With  : None
Replaces        : None
Download Size   : 235.61 KiB
Installed Size  : 923.00 KiB
Packager        : Sergej Pupykin <pupykin.s+arch@gmail.com>
Build Date      : Mon 14 Nov 2016 02:17:55 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
/usr/lib/systemd/system/motion.service is owned by motion 4.0.1-2

Steps to reproduce:

  • Install package.
PackagesAnyFeature RequestVery HighHigh[tinc] contains systemd unit filesIn Progress
0%
Task Description

Description:

  • The Arch version of tinc from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : tinc
Version         : 1.0.31-2
Description     : VPN (Virtual Private Network) daemon
Architecture    : x86_64
URL             : http://www.tinc-vpn.org/
Licenses        : GPL
Groups          : None
Provides        : None
Depends On      : lzo  openssl  zlib
Optional Deps   : None
Conflicts With  : None
Replaces        : None
Download Size   : 107.42 KiB
Installed Size  : 194.00 KiB
Packager        : Evangelos Foutras <evangelos@foutrelis.com>
Build Date      : Mon 13 Mar 2017 01:06:11 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
/usr/lib/systemd/system/tinc.service is owned by tinc 1.0.31-2
/usr/lib/systemd/system/tinc@.service is owned by tinc 1.0.31-2

Steps to reproduce:

  • Install package.
PackagesAnyFeature RequestVery HighHigh[netdata] contains systemd unit files In Progress
0%
Task Description

Description:

The Arch version of tinc from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repositorio               : community
Nombre                    : netdata
Versión                   : 1.6.0-3
Descripción               : Real-time performance monitoring, in the greatest possible detail, over the web.
Arquitectura              : x86_64
URL                       : https://github.com/firehol/netdata/wiki
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : libmnl  libnetfilter_acct  zlib
Dependencias opcionales   : nodejs: Webbox plugin
                            lm_sensors: sensors module
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1778,98 KiB
Tamaño de la instalación  : 6515,00 KiB
Encargado                 : Sven-Hendrik Haase <sh@lutzhaase.com>
Fecha de creación         : dom 23 abr 2017 16:24:38 -05
Validado por              : Suma MD5  Suma SHA-256  Firma
community/netdata	/usr/lib/systemd/
community/netdata	/usr/lib/systemd/system/
community/netdata	/usr/lib/systemd/system/netdata.service

Steps to reproduce:

  • Install package
PackagesAnyImplementation RequestVery HighHigh[murmur-headless] add a Murmur package capable of worki...In Progress
0%
Task Description

Description:

  • Add new a Murmur package capable of working without a graphical user interface. It’s common on servers and embedded devices that requires only interfaces like network (eg. SSH) or serial port to handle services.

Additional info:

  • based on murmur 1.2.19-5

Steps to reproduce:

  • none
PackagesAnyImplementation RequestVery HighHigh[asterisk-headless] add an Asterisk package capable of ...In Progress
0%
Task Description

Description:

  • Add an Asterisk package capable of working without a graphical user interface. It’s common on servers and embedded devices that requires only interfaces like network (eg. SSH) or serial port to handle services.

Additional info:

  • based on asterisk 14.4.0-1

Steps to reproduce:

  • none
PackagesAnyFeature RequestMediumHigh[supervisor] contains systemd unit fileIn Progress
0%
Task Description

The Arch version of “supervisor” from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the a global ruleset for INIT-freedom, systemd unit files removal is required and adding support for other init-systems (preferred OpenRC for now) to replace it.

PackagesStableUpdate RequestLowHigh[pigeonhole] needs to be updated (depends on older vers...In Progress
0%
Task Description

Description:
The pigeonhole package depends on dovecot 2.2.29.1, which is in version 2.3.4.1-2.hyperbola1.backports1 at the moment. Due to this, I can’t use it

Additional info:
* pigeonhole 0.4.18-1

PackagesStableBug ReportMediumHighopensmtpd: permission problemsIn Progress
0%
Task Description

Description:

cat msg | /usr/sbin/sendmail – sendmail: No such file or directorycannot create temporary file /var/spool/smtpd/offline/1572544775.XXXXIqNsFX

Additional info:
* package version: 6.4.2p1-1.hyperbola2.backports1

It is same problem as here:
https://github.com/OpenSMTPD/OpenSMTPD/issues/839

I could solve it with:

sudo chmod g+s /usr/sbin/smtpctl
sudo chmod g+s /usr/sbin/smtpctl

and then

sudo rc-service smtpd start

Even though I think I should not need to start it to use only sendmail.

PackagesAnySecurity IssueMediumMedium[cinepaint] unmaintained and unsupportableIn Progress
50%
Task Description

Remove “cinepaint” package since it’s unmaintained and unsupportable. Also, it doesn’t contains any file format support in the latest version (previous version supported multiple file formats).

I suggest use Krita (or Gimp 2.10) to edit 16bit and 32bit file formats or convert with imagemagick/graphicsmagick.

$ pacman -Si cinepaint
Repository      : community
Name            : cinepaint
Version         : 1:1.0.4-5
Description     : Sophisticated graphics manipulation programm supporting > 8bit pictures
Architecture    : x86_64
URL             : http://www.cinepaint.org
Licenses        : LGPL  GPL  MIT
Groups          : None
Provides        : None
Depends On      : gtk2  openexr  lcms  libxpm  fltk  ftgl  libxxf86vm
Optional Deps   : python2: for python plug-ins
                  gutenprint: for print plug-ins
                  ghostscript: for pdf plug-ins
Conflicts With  : None
Replaces        : None
Download Size   : 3.75 MiB
Installed Size  : 13.91 MiB
Packager        : Christian Hesse <arch@eworm.de>
Build Date      : Thu 28 Apr 2016 05:17:05 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
PackagesAnyBug ReportMediumMedium[lxmusic]package needs rebuilding as it fails to runIn Progress
0%
Task Description

Rebuilt version (using PKGBUILD from Arch) works fine. Same is true for lxmusic-gtk3 (which the PKGBUILD also builds).

https://git.archlinux.org/svntogit/community.git/tree/trunk?h=packages/lxmusic

PackagesAnyBug ReportLowLow[usbutils] lsusb does not list device namesIn Progress
0%
Task Description

Description:

lsusb does not resolve device names from /var/lib/usbutils/usb.ids

The same thing as described here: https://unix.stackexchange.com/questions/220759/lsusb-doesnt-list-device-names

PackagesAnyBug ReportLowLow[erlang-nox] uses "nox" suffixIn Progress
0%
Task Description

Description:

  • Fix package name to erlang-headless that is the correct name for packages without graphical user interface support. nox suffix is incorrect because Hyperbola supports Wayland too, not only X.Org.

Additional info:
* package version(s)

  • 19.3-3

* config and/or log files etc.

Steps to reproduce:

  • None
PackagesAnyBug ReportLowLow[qbittorrent-nox] uses "nox" suffixIn Progress
0%
Task Description

Description:

  • Fix package name to qbittorrent-headless that is the correct name for packages without graphical user interface support. nox suffix is incorrect because Hyperbola supports Wayland too, not only X.Org.

Additional info:
* package version(s)

  • 3.3.11-1

* config and/or log files etc.

Steps to reproduce:

  • None
PackagesAnyBackport RequestVery LowLowUblock Origin for IceapeIn Progress
90%
Task Description

The version I desire is this: 1.16.4.6

PackagesStableBug ReportMediumCritical[torsocks] which: no getcapRequires Testing
90%
Task Description

Current torsocks version is broken.
It returns the following error when attempting to torify application :

which: no getcap
PackagesStableBug ReportMediumMedium[virt-install] ERROR '_OsVariant' object has no attribu...Requires Testing
100%
Task Description

Trying to create a VM using virt-install (1.4.1-2.hyperbola2)

virt-install --connect qemu:///system \
--name debian \
--ram 1024 \
--disk path=/home/test/debian.img,size=50 \
--vcpus 2 \
--os-type linux \
--os-variant generic \
--network bridge=virbr0 \
--graphics none \
--console pty,target_type=serial \
--location 'http://ftp.nl.debian.org/debian/dists/stretch/main/installer-amd64/' \
--extra-args 'console=ttyS0,115200n8 serial'

This error shows up :
ERROR : ‘_OsVariant’ object has no attribute ‘urldistro’

I can’t create the VM.

PS : Error is not present on Debian Stretch with virt-install 1.4.0-5

Thanks for your help.

PackagesAnySecurity IssueMediumCritical[libjpeg-turbo] CVE-2019-2201Researching
0%
Task Description

In generate_jsimd_ycc_rgb_convert_neon of jsimd_arm64_neon.S, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution in an unprivileged process with no additional execution privileges needed. User interaction is needed for exploitation

https://security-tracker.debian.org/tracker/CVE-2019-2201

Patch: https://github.com/libjpeg-turbo/libjpeg-turbo/issues/388

PackagesAnyFeature RequestVery HighHigh[backuppc]: contains systemd filesResearching
0%
Task Description

Description:

Since Hyperbola follows the Init Freedom Campaign, systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)

community/backuppc 4.1.2-1 [installed]

   Enterprise-grade system for backing up Linux, Windows and MacOS PCs

* config and/or log files etc.

Additional info:

Steps to reproduce: install it

PackagesAnyFeature RequestVery HighHigh[gpsd]: contains systemd filesResearching
0%
Task Description

Since Hyperbola follows the Init Freedom Campaign, systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)

extra/gpsd 3.16-3 [installed]

   GPS daemon and library to support USB/serial GPS devices

* config and/or log files etc.

Additional info:

Steps to reproduce: install it

PackagesStableFeature RequestVery HighHigh[hiawatha]: remove systemd files, provide openrcResearching
0%
Task Description

Description:

Hiawatha contains only systemd files.

It shall be removed and openrc shall be provided

PackagesAnyBug ReportMediumHigh[notmuch-mutt] missing requirementResearching
0%
Task Description

Description:
notmuch-mutt fails to compile without perl-mail-message which is missing in Hyperbola

Steps to reproduce:
Install notmuch-mutt and try `notmuch-mutt` at the command line. Then install `perl-mail-message` from Arch and try again.

PackagesAnyBug ReportVery LowHigh[gstreamer] needed rebuildResearching
0%
Task Description

(gst-plugin-scanner:17336): GStreamer-WARNING : Failed to load plugin ‘/usr/lib/gstreamer-1.0/libgstzbar.so’: libzbar.so.0: cannot open shared object file: No such file or directory
(gst-plugin-scanner:17336): GStreamer-WARNING
: Failed to load plugin ‘/usr/lib/gstreamer-1.0/libgstfluidsynthmidi.so’: libfluidsynth.so.1: cannot open shared object file: No such file or directory

Repositorio : extra
Nombre : gstreamer
Versión : 1.12.0-1
Descripción : GStreamer open-source multimedia framework core library
Arquitectura : x86_64
URL : https://gstreamer.freedesktop.org/ Licencias : LGPL Grupos : Nada
Provee : Nada
Depende de : libxml2 glib2 libunwind libcap libelf
Dependencias opcionales : Nada
En conflicto con : Nada
Remplaza a : Nada
Tamaño de la descarga : 1897,45 KiB
Tamaño de la instalación : 17241,00 KiB
Encargado : Jan Alexander Steffens (heftig) jan.steffens@gmail.com Fecha de creación : jue 04 may 2017 14:13:05 -05
Validado por : Suma MD5 Suma SHA-256 Firma

PackagesAnyBug ReportMediumMedium[rxvt-unicode] rc-status command print "bug" tableResearching
0%
Task Description

If you do a command line rc-status on urxvt terminal, the name of the column of services are hidden. You will only see the status columns. Example:

Runlevel: default
  started  ]
  started  ]
  started  ]
  started  ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
Dynamic Runlevel: hotplugged
Dynamic Runlevel: needed/wanted
  started  ]
  started  ]
  started  ]d
Dynamic Runlevel: manual
PackagesAnyFeature RequestMediumMedium[epiphany] restore the hidden setting to disable JavaSc...Researching
0%
Task Description

Please restore the hidden setting (which can be enabled via dconf-editor) to disable JavaScript, which was removed last year (see here for details: https://github.com/GNOME/epiphany/blob/master/NEWS ).
Please do not remove the browser from the repos, as it renders this website correctly, unlike Mozlla based browsers (see here for more info: https://issues.hyperbola.info/index.php?do=details&task_id=131). The browser also provides other functions currently unavailable in Mozilla browsers, such as accessing LibreCMC router’s non-SSL web interface.

PackagesTestingBug ReportMediumMedium[emacs] crush after swayResearching
0%
Task Description

I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:

1. Run sway
2. Exit sway or killall sway
3. Try running emacs on console, there will be crush
4. log out, log in, and emacs will work on console again

Yet it should not crush.

PackagesAnySecurity IssueMediumMedium[openssh] CVE-2018-15919Researching
0%
Task Description

Remotely observable behavior in auth-gss2.c in OpenSSH through 7.8 could be used by remote attackers to detect existence of users on a target system when GSS2 is in use. NOTE: the discoverer states ‘We understand that the OpenSSH developers do not want to treat such a username enumeration (or “oracle”) as a vulnerability.’ https://security-tracker.debian.org/tracker/CVE-2018-15919

PackagesAnyDrop RequestMediumMedium[gksu] is replaced and has to be deleted from our pacma...Researching
0%
Task Description

Description:
From the author’s webpage gksu has been replaced.

Additional info:
* package version(s) : extra/gksu 2.0.2-5

http://www.nongnu.org/gksu/

Showing tasks 1 - 50 of 100 Page 1 of 21 - 2 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing