All Projects

ProjectCategoryTask TypePriority  descSeveritySummaryStatusProgress
Software DevelopmentHyperBKImplementation RequestVery HighCriticalDevelop HyperBK based on OpenBSD kernel + LibertyBSD sc...Deferred
0%
Task Description

Develop HyperBK (Hyper Berkeley Kernel) based on OpenBSD‘s kernel LibertyBSD‘s scripts to deblob and rebrand kernel for HyperbolaBSD.

TODO:

  • Download LibertyBSD scripts to deblob and rebrand kernel from their scripts.
  • Push source to HyperBK’s project.
  • Rebrand OpenBSD kernel to HyperBK with LibertyBSD scripts.
  • Package HyperBK for HyperbolaBSD.

PATCHING NOTE

When the check concerns kernel, we obviously want to match with HyperBK.

Example of triplet check:	hyperbolabsd)
Example of uname -s check:	HyperbolaBSD)
Example of uname -r check:	1.0)
Example of C macro check:	defined(__HyperbolaBSD__)
PackagesAnySecurity IssueVery HighCritical[openssh] CVE-2018-15919Researching
0%
Task Description

Remotely observable behavior in auth-gss2.c in OpenSSH through 7.8 could be used by remote attackers to detect existence of users on a target system when GSS2 is in use. NOTE: the discoverer states ‘We understand that the OpenSSH developers do not want to treat such a username enumeration (or “oracle”) as a vulnerability.’ https://security-tracker.debian.org/tracker/CVE-2018-15919

PackagesAnySecurity IssueVery HighCritical[libssh] CVE-2018-10933Researching
0%
Task Description

Description:
libssh versions 0.6 and above have an authentication bypass vulnerability in
the server code. By presenting the server an SSH2_MSG_USERAUTH_SUCCESS message
in place of the SSH2_MSG_USERAUTH_REQUEST message which the server would expect
to initiate authentication, the attacker could successfully authentciate
without any credentials.

Additional info:
* package version(s) : extra/libssh 0.7.5-1

CVE

PackagesAnyDrop RequestVery HighCritical[gksu] is replaced and has to be deleted from our pacma...Assigned
0%
Task Description

Description:
From the author’s webpage gksu has been replaced.

Additional info:
* package version(s) : extra/gksu 2.0.2-5

http://www.nongnu.org/gksu/

Software DevelopmentGeneralImplementation RequestVery HighCriticalPOWER (ppc64le) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and the Power9-based Talos II promises to be a great architecture example for workstations and servers environments where Hyperbola is focused since is a fully free long-term support distribution.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the POWER architecture (power64le).

NOTE: POWER porting is focused only for Hyperbola GNU/Linux-libre .

Software DevelopmentGeneralImplementation RequestVery HighCriticalARM (aarch and armv7h) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and ARM A7/A53 promises to be a great architecture example for low-power computers, laptops and embedded systems.

NOTE: ARM porting is focused only for HyperbolaBSD .

PackagesAnyFreedom IssueVery HighCritical[man-pages] contains nonfree POSIX manual pagesIn Progress
50%
Task Description

Description:

  • Arch distributes a version of man-pages with manual pages from the POSIX standard. The man-pages project is permitted to distribute them and Andries Brouwer assumes that re-distribution by vendors is permitted as well. However, modification is definitively not allowed, hence this contribution by The Institute of Electrical and Electronics Engineers and The Open Group render the entire man-pages package nonfree. The way to solve it is remove all nonfree POSIX manual pages from man-pages package.

Additional info:
* package version(s)

  • 4.11-1

* config and/or log files etc.

  • License file (POSIX-COPYRIGHT):
The Institute of Electrical and Electronics Engineers (IEEE) and
The Open Group, have given us permission to reprint portions of
their documentation.

In the following statement, the phrase ``this text'' refers to
portions of the system documentation.

Portions of this text are reprinted and reproduced in electronic form
from IEEE Std 1003.1, 2013 Edition, Standard for Information Technology
-- Portable Operating System Interface (POSIX), The Open Group Base
Specifications Issue 7, Copyright (C) 2013 by the Institute of Electri-
cal and Electronics Engineers, Inc and The Open Group.  (This is
POSIX.1-2008 with the 2013 Technical Corrigendum 1 applied.) In the
event of any discrepancy between this version and the original IEEE and
The Open Group Standard, the original IEEE and The Open Group Standard
is the referee document.  The original Standard can be obtained online
at http://www.unix.org/online.html .

This notice shall appear on any product containing this material.

Redistribution of this material is permitted so long as this notice and
the corresponding notices within each POSIX manual page are retained on
any distribution, and the nroff source is included. Modifications to
the text are permitted so long as any conflicts with the standard
are clearly marked as such in the text.

Steps to reproduce:

  • See license in /usr/share/licenses/man-pages/POSIX-COPYRIGHT
PackagesAnyFeature RequestVery HighHigh[timidity++] contains systemd unit fileIn Progress
30%
Task Description

Description:

  • The Arch version of TiMidity++ from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : extra
Name            : timidity++
Version         : 2.14.0-7
Description     : A MIDI to WAVE converter and player
Architecture    : x86_64
URL             : http://timidity.sourceforge.net
Licenses        : GPL
Groups          : None
Provides        : None
Depends On      : libao  jack
Optional Deps   : gtk2: for using the GTK+ interface
                  tk: for using the Tk interface
                  xaw3d: for using the Xaw interface
Conflicts With  : None
Replaces        : None
Download Size   : 530.60 KiB
Installed Size  : 1431.00 KiB
Packager        : Evangelos Foutras <evangelos@foutrelis.com>
Build Date      : Thu 10 Sep 2015 12:55:38 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
/usr/lib/systemd/system/timidity.service is owned by timidity++ 2.14.0-7

Steps to reproduce:

  • Install package.
PackagesAnyFeature RequestVery HighHigh[sage-notebook] contains systemd unit fileIn Progress
30%
Task Description

Description:

  • The Arch version of Sage-notebook from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required. OpenRC init script replacement isn’t possible here because Sage-notebook is using a systemd unit file adapted for users instead of system users.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : sage-notebook
Version         : 0.13-4
Description     : Browser-based notebook interface for SageMath
Architecture    : any
URL             : http://www.sagemath.org
Licenses        : GPL3
Groups          : None
Provides        : None
Depends On      : sagemath  python2-twisted  python2-flask-oldsessions  python2-flask-openid  python2-flask-autoindex  python2-flask-babel  mathjax
Optional Deps   : python2-pyopenssl: to use the notebook in secure mode
Conflicts With  : None
Replaces        : None
Download Size   : 1625.00 KiB
Installed Size  : 9154.00 KiB
Packager        : Antonio Rojas <arojas@archlinux.org>
Build Date      : Thu 04 May 2017 06:12:28 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
/usr/lib/systemd/user/sage.service is owned by sage-notebook 0.13-4

Steps to reproduce:

  • Install package.
PackagesAnyFeature RequestVery HighHigh[erlang-nox] contains systemd unit filesIn Progress
0%
Task Description

Description:

  • The Arch version of Erlang (headless version) from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : erlang-nox
Version         : 19.3-3
Description     : General-purpose concurrent functional programming language developed by Ericsson (headless version)
Architecture    : x86_64
URL             : http://www.erlang.org/
Licenses        : Apache
Groups          : None
Provides        : None
Depends On      : ncurses  openssl
Optional Deps   : erlang-unixodbc: database support
                  java-environment: for Java support
                  lksctp-tools: for SCTP support
Conflicts With  : erlang
Replaces        : None
Download Size   : 39.01 MiB
Installed Size  : 106.73 MiB
Packager        : Jan de Groot <jgc@archlinux.org>
Build Date      : Fri 28 Apr 2017 08:44:33 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
/usr/lib/systemd/system/epmd.service is owned by erlang-nox 19.3-3
/usr/lib/systemd/system/epmd.socket is owned by erlang-nox 19.3-3

Steps to reproduce:

  • Install package.
PackagesAnyFeature RequestVery HighHigh[motion] contains systemd unit fileIn Progress
0%
Task Description

Description:

  • The Arch version of Motion from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : motion
Version         : 4.0.1-2
Description     : A software motion detector which grabs images from video4linux devices and/or from webcams
Architecture    : x86_64
URL             : http://www.lavrsen.dk/foswiki/bin/view/Motion/WebHome
Licenses        : GPL
Groups          : None
Provides        : None
Depends On      : libjpeg  v4l-utils  ffmpeg
Optional Deps   : None
Conflicts With  : None
Replaces        : None
Download Size   : 235.61 KiB
Installed Size  : 923.00 KiB
Packager        : Sergej Pupykin <pupykin.s+arch@gmail.com>
Build Date      : Mon 14 Nov 2016 02:17:55 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
/usr/lib/systemd/system/motion.service is owned by motion 4.0.1-2

Steps to reproduce:

  • Install package.
PackagesAnyFeature RequestVery HighHigh[tinc] contains systemd unit filesIn Progress
0%
Task Description

Description:

  • The Arch version of tinc from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : tinc
Version         : 1.0.31-2
Description     : VPN (Virtual Private Network) daemon
Architecture    : x86_64
URL             : http://www.tinc-vpn.org/
Licenses        : GPL
Groups          : None
Provides        : None
Depends On      : lzo  openssl  zlib
Optional Deps   : None
Conflicts With  : None
Replaces        : None
Download Size   : 107.42 KiB
Installed Size  : 194.00 KiB
Packager        : Evangelos Foutras <evangelos@foutrelis.com>
Build Date      : Mon 13 Mar 2017 01:06:11 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
/usr/lib/systemd/system/tinc.service is owned by tinc 1.0.31-2
/usr/lib/systemd/system/tinc@.service is owned by tinc 1.0.31-2

Steps to reproduce:

  • Install package.
PackagesAnyFeature RequestVery HighHigh[netdata] contains systemd unit files In Progress
0%
Task Description

Description:

The Arch version of tinc from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repositorio               : community
Nombre                    : netdata
Versión                   : 1.6.0-3
Descripción               : Real-time performance monitoring, in the greatest possible detail, over the web.
Arquitectura              : x86_64
URL                       : https://github.com/firehol/netdata/wiki
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : libmnl  libnetfilter_acct  zlib
Dependencias opcionales   : nodejs: Webbox plugin
                            lm_sensors: sensors module
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1778,98 KiB
Tamaño de la instalación  : 6515,00 KiB
Encargado                 : Sven-Hendrik Haase <sh@lutzhaase.com>
Fecha de creación         : dom 23 abr 2017 16:24:38 -05
Validado por              : Suma MD5  Suma SHA-256  Firma
community/netdata	/usr/lib/systemd/
community/netdata	/usr/lib/systemd/system/
community/netdata	/usr/lib/systemd/system/netdata.service

Steps to reproduce:

  • Install package
PackagesAnyFeature RequestVery HighHigh[backuppc]: contains systemd filesResearching
0%
Task Description

Description:

Since Hyperbola follows the Init Freedom Campaign, systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)

community/backuppc 4.1.2-1 [installed]

   Enterprise-grade system for backing up Linux, Windows and MacOS PCs

* config and/or log files etc.

Additional info:

Steps to reproduce: install it

PackagesAnyFeature RequestVery HighHigh[gpsd]: contains systemd filesResearching
0%
Task Description

Since Hyperbola follows the Init Freedom Campaign, systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)

extra/gpsd 3.16-3 [installed]

   GPS daemon and library to support USB/serial GPS devices

* config and/or log files etc.

Additional info:

Steps to reproduce: install it

PackagesStableFeature RequestVery HighHigh[hiawatha]: remove systemd files, provide openrcResearching
0%
Task Description

Description:

Hiawatha contains only systemd files.

It shall be removed and openrc shall be provided

PackagesAnyFeature RequestVery HighHigh[dovecot] needs OpenRC init script and contains systemd...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd files

Additional info:

  • dovecot 2.2.29.1-1
dovecot /usr/lib/systemd/system/dovecot.service
dovecot /usr/lib/systemd/system/dovecot.socket
dovecot /usr/lib/tmpfiles.d/dovecot.conf

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[onioncat] needs OpenRC init scriptAssigned
0%
Task Description

Description:

  • needs OpenRC init script

Additional info:

  • onioncat 0.2.2.r578-1

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[umurmur] needs OpenRC init script and contains systemd...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd file

Additional info:

  • umurmur 0.2.16_a-6
umurmur /usr/lib/systemd/system/umurmur.service

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[prosody] needs OpenRC init script and contains systemd...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd files

Additional info:

  • prosody 1:0.10.r7198+.2fd20f372cb1+-2
prosody /usr/lib/systemd/system/prosody.service
prosody /usr/lib/sysusers.d/prosody.conf
prosody /usr/lib/tmpfiles.d/prosody.conf

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[unrealircd] needs OpenRC init script and contains syst...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd files

Additional info:

  • unrealircd 4.0.11-2
unrealircd /usr/lib/systemd/system/unrealircd.service
unrealircd /usr/lib/tmpfiles.d/unrealircd.conf

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[mcelog] needs OpenRC init script and contains systemd ...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd file

Additional info:

  • mcelog 1:148-1
mcelog /usr/lib/systemd/system/mcelog.service

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[bzr] needs OpenRC init script (bzr serve)Assigned
0%
Task Description

Description:

  • needs OpenRC init script (bzr serve), like [git] (git-daemon) and [subversion] (svnserve)

Additional info:

  • bzr 2.7.0-2
Note: needs a provide: bazaar

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[mercurial] needs OpenRC init scripts (hg serve and chg...Assigned
0%
Task Description

Description:

  • needs OpenRC init scripts (hg serve and chg server), like [git] (git-daemon) and [subversion] (svnserve)

Additional info:

  • mercurial 4.2-1
Note: needs a provide: hg

Steps to reproduce:

  • none
PackagesAnyImplementation RequestVery HighHigh[murmur-headless] add a Murmur package capable of worki...In Progress
0%
Task Description

Description:

  • Add new a Murmur package capable of working without a graphical user interface. It’s common on servers and embedded devices that requires only interfaces like network (eg. SSH) or serial port to handle services.

Additional info:

  • based on murmur 1.2.19-5

Steps to reproduce:

  • none
PackagesAnyImplementation RequestVery HighHigh[asterisk-headless] add an Asterisk package capable of ...In Progress
0%
Task Description

Description:

  • Add an Asterisk package capable of working without a graphical user interface. It’s common on servers and embedded devices that requires only interfaces like network (eg. SSH) or serial port to handle services.

Additional info:

  • based on asterisk 14.4.0-1

Steps to reproduce:

  • none
PackagesAnyImplementation RequestVery HighMedium[coturn] add new packageUnconfirmed
0%
Task Description

Description:

  • add new package

Additional info:

Steps to reproduce:

  • none
PackagesAnyImplementation RequestVery HighMedium[mediagoblin] add GNU MediaGoblin packageUnconfirmed
0%
Task Description

Description:

  • add GNU MediaGoblin package

Additional info:

  • none

Steps to reproduce:

  • none
PackagesAnyPrivacy IssueHighCritical[deepin-desktop-base] Check for CNZZ SpywareIn Progress
60%
Task Description

As per a recent discovery, we should check if our deepin is affected by the CNZZ spyware in the AppStore.
https://www.youtube.com/watch?v=v25Dy66AtNI

We also shouldn’t use the AppStore if it exists, due to non-free apps.

Known files:
> usr/share/dbus-1/system-services/com.deepin.daemon.Apps.service
> etc/appstore.json

PackagesAnySecurity IssueHighCritical[octopi] uploads system logs to ptpb.pw without confirm...In Progress
0%
Task Description

Octopi 0.9.0 is uploading system logs to ptpb.pw without confirmation through :

Tools
→ SysInfo → ptpb.pw

I think it should be either disabled or add at least a patch to ask for a confirmation.
An other way could be to patch this :

src/globals.cpp
240: * Generates SysInfo file and paste it to ptpb site
255:  QString ptpb = UnixCommand::getCommandOutput("curl -F c=@- https://ptpb.pw/?u=1", tempFile->fileName());
256:  return ptpb;

to :

src/globals.cpp
240: * Generates SysInfo file and paste it to ptpb site
255:  QString ptpb = UnixCommand::getCommandOutput("curl -F c=@- **https://ptpb.pw/", tempFile->fileName());
256:  return ptpb;

This way, you can at least ask for log deletion with the help of log uuid as explained here : https://ptpb.pw/#id10

ServicesPunBB BrandingBug ReportHighHighForum appearance bugsIn Progress
90%
Task Description

Some forum display errors:

  1. preview button with the orange border.
  1. Error message when logging in gray color making it difficult to read
PackagesStableUpdate RequestHighHigh[qt5] upgrade Qt project to the 5.6 LTS version, requir...Deferred
0%
Task Description

Cannot mix incompatible Qt library (version 0×50800) with this library (version 0×50904)
Aborted

./Nextcloud-2.3.3-x86_64.AppImage: /usr/lib/libQt5Core.so.5: version `Qt_5.9’ not found (required by /tmp/.mount_NextclpprMnG/usr/bin/../lib/libqt5keychain.so.1

These two packages are directly affected by an older qt5...

Could you update all the qt packages to the LTS version available?

PackagesAnyUpdate RequestMediumHighMake Knock patch for Linux-libre 4.14 LTSUnconfirmed
0%
Task Description

The Knock patches for linux-libre maintained by you at https://git.hyperbola.info:50100/kernels/knock.git/ have support up to linux-libre 4.13 only (and I think it didn’t work for it when I tried it, compilation failed) but from all of those supported versions, the newest maintained generation by the upstream is 4.9.x

However, since newer kernel generations might require reprogramming the patch, I want to request it only for the latest LTS generation which is 4.14. As you know, LTS software are supported for a long time, so it’s worth to make it for linux-libre 4.14.x

This might not be really important for Hyperbola in the short term, but you are the maintainers of the TCP Stealth implementation for Linux-libre and I and maybe other people would like to use it in their projects for newer versions.

Plus, it would be great since while 4.9 kernels can use the GRSec+Knock combination like linux-libre-lts-unofficial-grsec-knock, with support for 4.14 anyone would be able to use a combination of newer patches such as Linux-hardened+Knock (Linux-hardened supports 4.14 and 4.15 as of now) which is what I’d like to do.
https://github.com/copperhead/linux-hardened/releases

PackagesAnyBug ReportMediumHigh[postgresql] creating directory Permission deniedUnconfirmed
0%
Task Description

In the File postgresql.install

the output is:

    ==> requires datadir /var/lib/data
    ==> run as user postgres: 'initdb -D /var/lib/data'

when it should be:

    ==> requires datadir /var/lib/postgres/data
    ==> run as user postgres: 'initdb -D /var/lib/postgres/data'

It may be necessary to change:

local datadir = "/var/lib/data"

to

local datadir = "/var/lib/postgres/data"

The comand for default fails:

creating directory /var/lib/data... initdb: could not create directory "/var/lib/data": Permission denied
PackagesAnyBug ReportMediumHigh[xf86-video-intel] windows are not rendered correctly i...Requires Testing
100%
Task Description

I’m encountering this bug when using latest Pale Moon (version 2.8.0.1).

https://forum.palemoon.org/viewtopic.php?f=37&t=19941&sid=3cd95f0870b5cef74c582eb9a3ea778a

The bug doesn’t only affect the preferences dialog - other windows are not rendered correctly either such as DownThemAll! add-on (see attached image).

The suggested fix is to update the intel driver (the about:config suggested change makes the preference dialog usable but other windows such as DownThemAll! still aren’t displayed correctly).

I’m using a T60 with intel graphics.

PackagesStableBug ReportMediumHigh[tp_smapi] not working with most recent libre kernelResearching
0%
Task Description

Description:
tp_smapi fails to load

Additional info:
* package version(s)
tp_smapi-lts 0.43-1.hyperbola29.5
linux-libre-lts 4.9.143_gnu-0

* config and/or log files etc.
From dmesg:
thinkpad_ec: Unknown symbol _GLOBAL_OFFSET_TABLE_ (err 0)
thinkpad_ec: Unknown symbol __x86_indirect_thunk (err 0)

Steps to reproduce:
1. Install tp_smapi and the most recent stable linux-libre-lts
2. Reboot
3. sudo modprobe tp_smapi

PackagesAnySecurity IssueMediumMedium[cinepaint] unmaintained and unsupportableIn Progress
50%
Task Description

Remove “cinepaint” package since it’s unmaintained and unsupportable. Also, it doesn’t contains any file format support in the latest version (previous version supported multiple file formats).

I suggest use Krita (or Gimp 2.10) to edit 16bit and 32bit file formats or convert with imagemagick/graphicsmagick.

$ pacman -Si cinepaint
Repository      : community
Name            : cinepaint
Version         : 1:1.0.4-5
Description     : Sophisticated graphics manipulation programm supporting > 8bit pictures
Architecture    : x86_64
URL             : http://www.cinepaint.org
Licenses        : LGPL  GPL  MIT
Groups          : None
Provides        : None
Depends On      : gtk2  openexr  lcms  libxpm  fltk  ftgl  libxxf86vm
Optional Deps   : python2: for python plug-ins
                  gutenprint: for print plug-ins
                  ghostscript: for pdf plug-ins
Conflicts With  : None
Replaces        : None
Download Size   : 3.75 MiB
Installed Size  : 13.91 MiB
Packager        : Christian Hesse <arch@eworm.de>
Build Date      : Thu 28 Apr 2016 05:17:05 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
PackagesAnyImplementation RequestMediumMedium[uzem][uzebox] add uzem emulator and uzebox firmware pa...Assigned
0%
Task Description

Add “uzem” emulator and “uzebox” firmware packages[0][1].

It’s a emulator and firmware for fully free 8bit game console.

[0]:http://belogic.com/uzebox/index.asp (no https found)
[1]:https://github.com/Uzebox/uzebox

PackagesAnyImplementation RequestMediumMedium[ncdu] add new packageDeferred
0%
Task Description

PKGBUILD

# $Id: PKGBUILD 187611 2016-08-26 15:44:01Z bisson $
# Contributor: lp76 <l.peduto@gmail.com>
# Contributor: Daenyth <Daenyth+Arch AT gmail DOT com>
# Maintainer: Gaetan Bisson <bisson@archlinux.org>

pkgname=ncdu
pkgver=1.12
pkgrel=1.hyperbola1
pkgdesc='Disk usage analyzer with an ncurses interface'
url='https://dev.yorhel.nl/ncdu'
license=('custom:MIT')
depends=('ncurses')
arch=('i686' 'x86_64')
validpgpkeys=('74460D32B80810EBA9AFA2E962394C698C2739FA')
source=("https://dev.yorhel.nl/download/${pkgname}-${pkgver}.tar.gz"{,.asc})
sha512sums=('20620dd79d2af878442769e097f13806f64f23875dcb85ebccd573a3de43aba5663d496049b64015d13f9a79d624298032c008ef61dfb6f61d8b12902b8dca12'
            'SKIP')

build() {
    cd "${srcdir}/${pkgname}-${pkgver}"
    ./configure --prefix=/usr
    make
}

package() {
    cd "${srcdir}/${pkgname}-${pkgver}"
    make DESTDIR="${pkgdir}" install
    install -Dm644 COPYING "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
}
PackagesAnyImplementation RequestMediumMedium[searx] add new packageDeferred
0%
Task Description

Hi André, you could make an init for the searx search engine, it happens that
I want to launch it from local to avoid being in searx.me or
searx.riseup.net.

I have seen that there is a PKGBUILD in AUR [0]. I think it is necessary to make one with the init Openrc

[0]: https://aur.archlinux.org/packages/searx-py3/

PackagesAnyBug ReportMediumMedium[rxvt-unicode] rc-status command print "bug" tableResearching
0%
Task Description

If you do a command line rc-status on urxvt terminal, the name of the column of services are hidden. You will only see the status columns. Example:

Runlevel: default
  started  ]
  started  ]
  started  ]
  started  ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
Dynamic Runlevel: hotplugged
Dynamic Runlevel: needed/wanted
  started  ]
  started  ]
  started  ]d
Dynamic Runlevel: manual
ServicesFlyspray BrandingImplementation RequestMediumMediumAdd Hyperbola branding to HyperTaskIn Progress
40%
Task Description

Add Hyperbola branding to HyperTask such as HyperWiki and HyperForum for prolixity reasons.

PackagesAnyFeature RequestMediumMedium[epiphany] restore the hidden setting to disable JavaSc...Researching
0%
Task Description

Please restore the hidden setting (which can be enabled via dconf-editor) to disable JavaScript, which was removed last year (see here for details: https://github.com/GNOME/epiphany/blob/master/NEWS ).
Please do not remove the browser from the repos, as it renders this website correctly, unlike Mozlla based browsers (see here for more info: https://issues.hyperbola.info/index.php?do=details&task_id=131). The browser also provides other functions currently unavailable in Mozilla browsers, such as accessing LibreCMC router’s non-SSL web interface.

ServicesHyperWiki/DokuWikiImplementation RequestMediumMediumLibreboot hardening grub guideUnconfirmed
0%
Task Description

I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,

https://libreboot.org/docs/gnulinux/grub_hardening.html

I wondered if there is anything different that needs to be done to get this part done:

gpg –homedir keys –detach-sign my.initramfs
gpg –homedir keys –detach-sign my.kernel
gpg –homedir keys –detach-sign libreboot_grub.cfg
gpg –homedir keys –detach-sign my.grubtest.cfg

it gives me a bunch of weird errors

PackagesStableBug ReportMediumMedium[libusb] error when mounting USB memories on virtual ma...Researching
0%
Task Description

## Bug ##

libusb: error [_get_usbfs_fd] libusb couldn’t open USB device /dev/bus/usb/003/003: permission denied libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.

Reference links: https://askubuntu.com/questions/526962/libusb-couldnt-open-usb-device-dev-bus-usb-002-006-permission-denied-libusb

PackagesAnyFeature RequestMediumMedium[pybitmessage] Package RequestUnconfirmed
0%
Task Description

PyBitmessage is a secure p2p e-mail alternative. It could be useful to package it.

https://github.com/Bitmessage/PyBitmessage/releases https://aur.archlinux.org/packages/pybitmessage/ https://aur.archlinux.org/packages/pybitmessage-git/ (contains a firejail profile)

PackagesAnyFeature RequestMediumMedium[DCPT500W] possible integration of drivers to cups on P...Unconfirmed
0%
Task Description

Hi guys, I have ever run into a Brother brand printer model DCPT500W[0], and I have seen that the source code for the drivers under GPLv3 license is available.

I also see that there is a file brother_dcpt500w_printer_en.ppd, which is important for cups, which is why it may be necessary to integrate it into the cups, as long as the drivers are Libre.

[0]:https://download.brother.com/welcome/dlf101963/dcpt500w_cupswrapper_GPL_source_3.0.2-0.tar.gz

PackagesAnyUpdate RequestMediumMedium[cups] update requestAssigned
0%
Task Description

New versión v2.2.7

References:

PackagesStableBug ReportMediumMedium[linux-libre-lts] [i915] Display freeze : hpd interrupt...Deferred
0%
Task Description

Hello,

I recently acquired a T400 Thinkpad with 1440×900 panel.
On this T400, I installed Hyperbola, just like on my x200 Thinkpad with 1280×800 panel.

Both Thinkpad are running the same Hyperbola installation :

Full disk encryption (with Libreboot) so both Thinkpad are using early KMS (MODULES=”i915” in /etc/mkinitcpio.conf)
Same kernel : linux-libre-lts (4.9.99 at the moment I’m writing this message)
video driver : modesetting
DE : xfce4 with xfwm4

On the Thinkpad x200, everything works great, no issue to report.

On the T400 though, the linux-libre-lts kernel, I’m getting random display freezes, when it happens, this message appears in dmesg :

hpd interrupt storm detected on connector hdmi-a-1

And the display (and sound) freezes for 10 seconds (sometimes more !)

As Hyperbola proposes linux-libre-lts kernel only, I installed latest linux-libre-lts (4.14.40) and linux-libre (4.16.8) from Parabola GNU/Linux repo.

Results :

With 4.14.40 : Same issue as with 4.9.99 kernel from Hyperbola repo.
With 4.16.8 : Issue is not present ! No more freeze !

I’m not sure how to proceed though. Would you be kind enough helping me to find which commit in i915 driver improved the situation ? If we find it, maybe it could be added as a patch to 4.9.x kernel series.
Or maybe it is something else.. I don’t have much experience, I can provide logs if needed.

Thanks for your help

PackagesAnyBug ReportMediumMedium[weechat] startup complains about missing guile Researching
60%
Task Description

Bug error:

Error: it was not possible to load the plugin "/usr/lib/weechat/plugins/guile.so": libguile-2.0.so.22: the file of the shared object can not be opened: The file or the directory does not exist

Package information

$ sudo pacman -Si weechat
Repositorio               : community
Nombre                    : weechat
Versión                   : 1.7.1-4
Descripción               : Fast, light and extensible IRC client (curses UI)
Arquitectura              : x86_64
URL                       : http://www.weechat.org/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : gnutls  curl  libgcrypt
Dependencias opcionales   : perl
                            python2
                            lua
                            tcl
                            ruby
                            aspell
                            guile2.0
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1916,09 KiB
Tamaño de la instalación  : 17756,00 KiB
Encargado                 : Christian Rebischke <Chris.Rebischke@archlinux.org>
Fecha de creación         : lun 24 abr 2017 10:48:25 -05
Validado por              : Suma MD5  Suma SHA-256  Firma
sudo pacman -Ql weechat
weechat /usr/
weechat /usr/bin/
weechat /usr/bin/weechat
weechat /usr/bin/weechat-curses
weechat /usr/include/
weechat /usr/include/weechat/
weechat /usr/include/weechat/weechat-plugin.h
weechat /usr/lib/
weechat /usr/lib/pkgconfig/
weechat /usr/lib/pkgconfig/weechat.pc
weechat /usr/lib/weechat/
weechat /usr/lib/weechat/plugins/
weechat /usr/lib/weechat/plugins/alias.so
weechat /usr/lib/weechat/plugins/aspell.so
weechat /usr/lib/weechat/plugins/charset.so
weechat /usr/lib/weechat/plugins/exec.so
weechat /usr/lib/weechat/plugins/fifo.so
weechat /usr/lib/weechat/plugins/guile.so
weechat /usr/lib/weechat/plugins/irc.so
weechat /usr/lib/weechat/plugins/logger.so
weechat /usr/lib/weechat/plugins/lua.so
weechat /usr/lib/weechat/plugins/perl.so
weechat /usr/lib/weechat/plugins/python.so
weechat /usr/lib/weechat/plugins/relay.so
weechat /usr/lib/weechat/plugins/ruby.so
weechat /usr/lib/weechat/plugins/script.so
weechat /usr/lib/weechat/plugins/tcl.so
weechat /usr/lib/weechat/plugins/trigger.so
weechat /usr/lib/weechat/plugins/xfer.so
weechat /usr/share/
weechat /usr/share/doc/
weechat /usr/share/doc/weechat/
weechat /usr/share/doc/weechat/weechat_dev.en.html
weechat /usr/share/doc/weechat/weechat_dev.fr.html
weechat /usr/share/doc/weechat/weechat_dev.ja.html
weechat /usr/share/doc/weechat/weechat_faq.de.html
weechat /usr/share/doc/weechat/weechat_faq.en.html
weechat /usr/share/doc/weechat/weechat_faq.fr.html
weechat /usr/share/doc/weechat/weechat_faq.it.html
weechat /usr/share/doc/weechat/weechat_faq.ja.html
weechat /usr/share/doc/weechat/weechat_faq.pl.html
weechat /usr/share/doc/weechat/weechat_plugin_api.en.html
weechat /usr/share/doc/weechat/weechat_plugin_api.fr.html
weechat /usr/share/doc/weechat/weechat_plugin_api.it.html
weechat /usr/share/doc/weechat/weechat_plugin_api.ja.html
weechat /usr/share/doc/weechat/weechat_quickstart.cs.html
weechat /usr/share/doc/weechat/weechat_quickstart.de.html
weechat /usr/share/doc/weechat/weechat_quickstart.en.html
weechat /usr/share/doc/weechat/weechat_quickstart.es.html
weechat /usr/share/doc/weechat/weechat_quickstart.fr.html
weechat /usr/share/doc/weechat/weechat_quickstart.it.html
weechat /usr/share/doc/weechat/weechat_quickstart.ja.html
weechat /usr/share/doc/weechat/weechat_quickstart.pl.html
weechat /usr/share/doc/weechat/weechat_quickstart.ru.html
weechat /usr/share/doc/weechat/weechat_relay_protocol.en.html
weechat /usr/share/doc/weechat/weechat_relay_protocol.fr.html
weechat /usr/share/doc/weechat/weechat_relay_protocol.ja.html
weechat /usr/share/doc/weechat/weechat_scripting.de.html
weechat /usr/share/doc/weechat/weechat_scripting.en.html
weechat /usr/share/doc/weechat/weechat_scripting.fr.html
weechat /usr/share/doc/weechat/weechat_scripting.it.html
weechat /usr/share/doc/weechat/weechat_scripting.ja.html
weechat /usr/share/doc/weechat/weechat_scripting.pl.html
weechat /usr/share/doc/weechat/weechat_tester.de.html
weechat /usr/share/doc/weechat/weechat_tester.en.html
weechat /usr/share/doc/weechat/weechat_tester.fr.html
weechat /usr/share/doc/weechat/weechat_tester.it.html
weechat /usr/share/doc/weechat/weechat_tester.ja.html
weechat /usr/share/doc/weechat/weechat_tester.pl.html
weechat /usr/share/doc/weechat/weechat_user.de.html
weechat /usr/share/doc/weechat/weechat_user.en.html
weechat /usr/share/doc/weechat/weechat_user.fr.html
weechat /usr/share/doc/weechat/weechat_user.it.html
weechat /usr/share/doc/weechat/weechat_user.ja.html
weechat /usr/share/doc/weechat/weechat_user.pl.html
weechat /usr/share/icons/
weechat /usr/share/icons/hicolor/
weechat /usr/share/icons/hicolor/32x32/
weechat /usr/share/icons/hicolor/32x32/apps/
weechat /usr/share/icons/hicolor/32x32/apps/weechat.png
weechat /usr/share/locale/
weechat /usr/share/locale/cs/
weechat /usr/share/locale/cs/LC_MESSAGES/
weechat /usr/share/locale/cs/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/de/
weechat /usr/share/locale/de/LC_MESSAGES/
weechat /usr/share/locale/de/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/es/
weechat /usr/share/locale/es/LC_MESSAGES/
weechat /usr/share/locale/es/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/fr/
weechat /usr/share/locale/fr/LC_MESSAGES/
weechat /usr/share/locale/fr/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/hu/
weechat /usr/share/locale/hu/LC_MESSAGES/
weechat /usr/share/locale/hu/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/it/
weechat /usr/share/locale/it/LC_MESSAGES/
weechat /usr/share/locale/it/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/ja/
weechat /usr/share/locale/ja/LC_MESSAGES/
weechat /usr/share/locale/ja/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/pl/
weechat /usr/share/locale/pl/LC_MESSAGES/
weechat /usr/share/locale/pl/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/pt/
weechat /usr/share/locale/pt/LC_MESSAGES/
weechat /usr/share/locale/pt/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/pt_BR/
weechat /usr/share/locale/pt_BR/LC_MESSAGES/
weechat /usr/share/locale/pt_BR/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/ru/
weechat /usr/share/locale/ru/LC_MESSAGES/
weechat /usr/share/locale/ru/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/tr/
weechat /usr/share/locale/tr/LC_MESSAGES/
weechat /usr/share/locale/tr/LC_MESSAGES/weechat.mo
weechat /usr/share/man/
weechat /usr/share/man/cs/
weechat /usr/share/man/cs/man1/
weechat /usr/share/man/cs/man1/weechat.1.gz
weechat /usr/share/man/de/
weechat /usr/share/man/de/man1/
weechat /usr/share/man/de/man1/weechat.1.gz
weechat /usr/share/man/fr/
weechat /usr/share/man/fr/man1/
weechat /usr/share/man/fr/man1/weechat.1.gz
weechat /usr/share/man/it/
weechat /usr/share/man/it/man1/
weechat /usr/share/man/it/man1/weechat.1.gz
weechat /usr/share/man/ja/
weechat /usr/share/man/ja/man1/
weechat /usr/share/man/ja/man1/weechat.1.gz
weechat /usr/share/man/man1/
weechat /usr/share/man/man1/weechat.1.gz
weechat /usr/share/man/pl/
weechat /usr/share/man/pl/man1/
weechat /usr/share/man/pl/man1/weechat.1.gz
weechat /usr/share/man/ru/
weechat /usr/share/man/ru/man1/
weechat /usr/share/man/ru/man1/weechat.1.gz

References:

Showing tasks 1 - 50 of 449 Page 1 of 91 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing