All Projects

ProjectCategory  ascTask TypePrioritySeveritySummaryStatusProgress
PackagesStableBug ReportMediumMedium[virt-install] ERROR '_OsVariant' object has no attribu...Requires Testing
100%
Task Description

Trying to create a VM using virt-install (1.4.1-2.hyperbola2)

virt-install --connect qemu:///system \
--name debian \
--ram 1024 \
--disk path=/home/test/debian.img,size=50 \
--vcpus 2 \
--os-type linux \
--os-variant generic \
--network bridge=virbr0 \
--graphics none \
--console pty,target_type=serial \
--location 'http://ftp.nl.debian.org/debian/dists/stretch/main/installer-amd64/' \
--extra-args 'console=ttyS0,115200n8 serial'

This error shows up :
ERROR : ‘_OsVariant’ object has no attribute ‘urldistro’

I can’t create the VM.

PS : Error is not present on Debian Stretch with virt-install 1.4.0-5

Thanks for your help.

PackagesStableBug ReportVery LowHigh[vlc] DVB : cache_block stream error: cannot pre fill b...Unconfirmed
0%
Task Description

Current VLC version (3.0.4-3.hyperbola1.backports1) fails to play DVB stream using a RTL2832 usb dongle.

I start the playlist like this :

vlc channels.conf

but it returns the following error :

cache_block stream error: cannot pre fill buffer

Also, it asks the user to be in “video” group to access DVB device, this was not needed before with Hyperbola 0.2.9. User being in “wheel” was enough.
Anyway, even after adding my user to video group, it still fails with “cache_block stream error: cannot pre fill buffer”

This is not an issue with my DVB adapter or driver. rtl2832 is correctly loaded. And I can play the channels.conf playlist just fine with “mpv” or “mplayer”.
Also, the channels.conf used works just fine with a more recent version of VLC on an other system (Manjaro) so something is broken with the current VLC used.

Maybe a package bump would fix the issue.

PackagesStableBug ReportVery LowMediumlinphonec error (cli version)Unconfirmed
0%
Task Description

Description:
linphonec is unusable because a error produce a continuous log

Additional info:
linphone 3.11.1-1.hyperbola1

Steps to reproduce:
linphonec

Log:
linphonec> 2019-12-15 19:25:58:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:03:012 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:08:018 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:13:013 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:18:016 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:23:014 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:28:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:33:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:38:012 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:43:015 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:48:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:53:010 ortp-error-Error in connect: Network is unreachable

PackagesStableBug ReportVery LowMediumnouveau_drv.so: undefined symbol: exaDriverAllocUnconfirmed
0%
Task Description

Any attempt to load Nouveau in X server results in the following error:

nouveau_drv.so: undefined symbol: exaDriverAlloc

Additional info

Steps to reproduce

  1. Stop the X server.
  2. Add a section such as the following to “/etc/X11/xorg.conf”:
    Section "Device"
      Identifier "Video card"
      Driver "nouveau"
      Option "Backlight" "nv_backlight"
    EndSection
  3. Start the X server.
PackagesTestingBug ReportHighCriticalRunit errors,Unconfirmed
0%
Task Description

/sbin/openrc-run: bad interpreter: No such file or directory

I get this error whenever I try to start dhcpcd with sv /etc/runit/

And for sndiod I get this doing the same guide,

warning: sndiod: unable to open supervise/ok: file does not exist

Although rather ironically, If I type sndiod or dhcpcd into root, it works just fine.

Maybe its an FHS issue or possibly, I am screwing up? I am not sure. Feedback is welcome.

This is what I did:

=⇒ Add a service:

ln -s /etc/sv/<service> /var/service
==> Start/stop/restart a service:
sv <start/stop/restart> <service>

more or less, I used this guide.

PackagesTestingBug ReportMediumMedium[Hyperbola GNU/Linux 0.4] Problems with ALSA and sndio ...Unconfirmed
0%
Task Description

Description: User reporting problems with sndio. A further check with ALSA showed no active device being used. User has HDMI-sound in usage.

PackagesTestingBug ReportMediumMedium[Hyperbola GNU/Linux 0.4] Problems with touch- / trackp...Assigned
90%
Task Description

Description: Not finally tested, only getting the logs from chat within here for better analysis later on. User reported that touchpad is not working for now with Hyperbola GNU/Linux 0.4. dmesg-messagelog:

[anonymous@anonymous ~]$ dmesg | grep pad
[ 4.766853] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[ 4.823723] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0×840300/0x2e800/0×0, board id: 3127, fw id: 8526786

PackagesTestingFeature RequestVery LowMedium[Hyperbola GNU/Linux-Libre 0.4] [lumina-core] Replace t...Assigned
0%
Task Description

Also known as “Replace the distributor logo as the startup dialogue, and app menu and start button icons from generic” in the long title because of character limitation.

If the distributor logo icon isn’t present, simply insert it and link few others into the appropriate paths that I made and attached below there.

Here is the list of the paths you do:

/usr/share/icons/material-design-{dark,light}/scalable/places/:

  • distributor-logo.svg
  • distributor-logo-hyperbola.svg (symlink of * distributor-logo.svg)
  • start-here{,-hyperbola,-lumina}.svg (symlink of distributor-logo.svg)
PackagesTestingBug ReportHighCritical[Hyperbola GNU/Linux-libre 0.4] Problems with sndio fai...Requires Testing
90%
Task Description

There are issues with the current sndio-package as it seems not possible to get this to work with ALSA.

PackagesTestingFeature RequestVery LowMedium[Hyperbola GNU/Linux-libre 0.4] [xorg-xdm] Replace the ...Unconfirmed
0%
Task Description

Few other distros like Debian, NetBSD, and OpenBSD have some own customized login screens, while right here, the actual distro didn’t. I suggest you replacing them for the following paths on the list to come up next package release, which I have three files attached below there.

/etc/X11/xdm:

  • Xresources
  • Xsetup_0

/usr/share/xdm/pixmaps:

  • hyperbola.xpm
  • xorg{,-bw}.xpm (removed as unused)
PackagesTestingBug ReportMediumMedium[emacs] crush after swayResearching
0%
Task Description

I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:

1. Run sway
2. Exit sway or killall sway
3. Try running emacs on console, there will be crush
4. log out, log in, and emacs will work on console again

Yet it should not crush.

PackagesTestingImplementation RequestVery LowLow[sirikata] add packageDeferred
0%
Task Description

Sirikata a platform for virtual worlds.

Sirikata is a platform for virtual worlds. We provide a set of libraries and protocols which can be used to deploy a virtual world, as well as fully featured sample implementations of services for hosting and deploying these worlds.

Please implement sirikata as an optional package.

PackagesTestingBug ReportVery LowHigh[xenocara-xkbcomp] Could not resolve keysym XF86FullScr...Unconfirmed
0%
Task Description

While the X session is still running, did anyone happen key bindings being unresponsive? A few lines of errors appeared from xkbcomp because of a missing keyboard symbol on the single TTY. It reads:

The XKEYBOARD keymap compiler (xkbcomp) reports:
> error:   Could not resolve keysym XF86FullScreen
Errors from xkbcomp are not fatal to the X server

See also related issues affected on other existing distros, were eventually resolved:

PackagesTestingImplementation RequestMediumMediumlinux-libre-lts-hypersec: New package with extra securi...Deferred
0%
Task Description

Description: Per a user request and to better secure the kernel, we can embed the cryptsetup and ciphers in the kernel. This would mean rather than exposed modules, they are built-in to the kernel and ready to use even without an intramfs.

To be embedded: ciphers aes, twofish, serpent; sha256, sha512 - and the necessary modules (don’t forget the block modes xts, lvm and cryptsetup ...)

Additionally, we could include USB Guard and any other features that meet our social contract and security outlook.

ServicesWiki Page IssueImplementation RequestVery LowMediumAdd notification/subscription capabilities when a page ...Unconfirmed
0%
Task Description

After talking to Emulatorman, we think this would be a nice feature to add to our Hyperwiki to be able to subscribe to the original page in English to help tracking changing to the translated pages.
This implies to add the email notifications to the dokuwiki system

Software Developmentchroot-nspawnBug ReportMediumMedium[chroot-nspawn] Create mount points if mountpoint exit ...Unconfirmed
0%
Task Description

The actual behavior is to create mount points if mountpoint exits with exit status 1, however it may also exit with code 32 and thus creating a real mess:

$ sudo chroot-nspawn
Spawning container megver83 on /var/lib/archbuild/chroot1/megver83
Press ^] three times within 1s to kill container.
mount: /sys/fs/cgroup: mount point does not exist.
mkdir: cannot create directory '/sys/fs/cgroup/blkio': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/cpu': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/cpuacct': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/cpu,cpuacct': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/cpuset': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/devices': No such file or directory  
mkdir: cannot create directory '/sys/fs/cgroup/freezer': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/memory': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/net_cls': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/net_cls,net_prio': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/net_prio': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/pids': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/systemd': No such file or directory
mount: /sys/fs/cgroup/blkio: mount point does not exist.
mount: /sys/fs/cgroup/cpuset: mount point does not exist.
mount: /sys/fs/cgroup/devices: mount point does not exist.
mount: /sys/fs/cgroup/freezer: mount point does not exist.
mount: /sys/fs/cgroup/memory: mount point does not exist.
mount: /sys/fs/cgroup/pids: mount point does not exist.

So I created a patch to fix this.

P.S.: although I can git clone the repo with ssh access, whenever I do a push I get:

error: remote unpack failed: unable to create temporary object directory
To ssh://git.hyperbola.info:51100/~git/software/chroot-nspawn.git
 ! [remote rejected] master -> master (unpacker error)
error: failed to push some refs to 'ssh://git.hyperbola.info:51100/~git/software/chroot-nspawn.git'

Do I have the permission to write in this repo? If not, I’d like it, as I’m planning to improve this great script

Showing tasks 301 - 316 of 316 Page 7 of 7<<First - 3 - 4 - 5 - 6 - 7

Available keyboard shortcuts

Tasklist

Task Details

Task Editing