All Projects

ProjectCategory  ascTask TypePrioritySeveritySummaryStatusProgress
PackagesAnyImplementation RequestVery LowLow[mkv-extractor-qt] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

mkv-extractor-qt

“Graphical MKV demultiplexer”

https://aur.archlinux.org/packages/mkv-extractor-qt/

License: GPL3

Thanks

PackagesAnyImplementation RequestVery LowLow[vidcutter] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

vidcutter

“A modern, simple to use, constantly evolving and hella fast MEDIA CUTTER + JOINER w/ frame-accurate SmartCut technology + Qt5, libmpv, FFmpeg and MediaInfo powering the backend.”

License : GPL3

https://aur.archlinux.org/packages/vidcutter/

https://vidcutter.ozmartians.com/

PackagesAnyBackport RequestVery LowMediumRandom Agent Spoofer for IceapeUnconfirmed
0%
Task Description

random_agent_spoofer-0.9.5.8.4-fx.xpi is the version I desire, can you implement it?

PackagesAnyBackport RequestVery LowMediumGreasemonkey For IceapeUnconfirmed
0%
Task Description

greasemonkey-3.31.4 version desired. I would love to see it implemented for Iceape

PackagesAnyImplementation RequestVery LowMediumPrivacy Settings for IceapeUnconfirmed
0%
Task Description

This addon works for any firefox based browser but not seamonkey based or this.

I wondered if you could implement the iceweasel one for Iceape.

PackagesAnyFreedom IssueVery LowLowSsleuth for IceapeUnconfirmed
0%
Task Description

5.4 version desired, it would be nice to still see the ciphers in Iceape.

PackagesAnyBackport RequestVery LowLowSelf Destructing Cookies for IceapeUnconfirmed
0%
Task Description

I would like this to be available for Iceape as well V4.13

PackagesAnyBackport RequestVery LowMediumNo Resource Url Leak for IceapeUnconfirmed
0%
Task Description

1.2.4 version would be nice for Iceape.

PackagesAnyFreedom IssueVery LowLowEnigmail for IceapeUnconfirmed
0%
Task Description

this would be appreciated greatly, although I am in no hurry.

PackagesAnyFreedom IssueVery LowMedium[mongodb] needs OpenRC init scriptUnconfirmed
0%
Task Description

Description:
needs OpenRC init script

Additional info:
* mongodb-3.4.3-1

PackagesAnyBug ReportVery LowLowmarble-qt: doesn't look like a valid Marble plugin: "/...Unconfirmed
0%
Task Description

Description:

$ marble-qt –latlone=0.5,6.5
Ignoring to load the following file since it doesn’t look like a valid Marble plugin: “/usr/lib/marble/plugins/libWlocatePositionProviderPlugin.so” Reason: “Cannot load library /usr/lib/marble/plugins/libWlocatePositionProviderPlugin.so: (libwlocate.so: cannot open shared object file: No such file or directory)”

When package libwlocate is installed, it is not showing this error.

Shall that package be dependency?

PackagesAnyImplementation RequestVery LowLow[qarte] add packageUnconfirmed
0%
Task Description

Request for :

qarte

“Allow you to browse into the archive of arte+7 & arteLiveWeb sites and to record your prefered videos.”

https://aur.archlinux.org/packages/qarte

License : GPL3

PackagesAnyFeature RequestVery LowLowadd package powerkitUnconfirmed
0%
Task Description

https://github.com/rodlie/powerkit/releases

Version 1.0 requested

When you add Lumina desktop, add this package for sure. Although it is compatible with other desktops too. So it would be good to add it regardless.

PackagesAnyFeature RequestVery LowMediumAdd Draco DesktopUnconfirmed
0%
Task Description

https://github.com/rodlie/draco

its like Lumina Desktop, but its more lightweight and better for Gnu/Linux

:)

Matter of fact, I hope its okay, but the latest stable build, of Draco is vastly better than Lumina. And for this reason I wanted to know if you could put higher priority on this than the Lumina Desktop request.

PackagesAnyFeature RequestVery LowMedium[minidlna] remove systemd file and add openrc supportUnconfirmed
0%
Task Description

Description:

minidlna lacks openrc support and includes a systemd file

Additional info: none

Steps to reproduce:

$ sudo pacman -S minidlna
$ cat /usr/lib/systemd/system/minidlna.service

PackagesAnyBug ReportVery LowHighgroff: package not built with URW fonts properly or suc...Unconfirmed
0%
Task Description

Description:

groff is typesetting system similar to TeX/LaTeX however, it is very small and very usable. It is not built properly with URW fonts, or such are missing, I cannot know all details. Overall groff package is basically somehow broken.

It shall depend on proper fonts, and such fonts should already be built, including their Unicode versions.

Package is only partially built.

PackagesAnyImplementation RequestVery LowMedium[nnn] package requestUnconfirmed
0%
Task Description

This is a request to package nnn - a full-featured terminal file manager for low-end devices and the regular desktop.

nnn is available on Debian, Ubuntu (and family), Fedora, OpenSUSE and Arch Linux.

Homepage: https://github.com/jarun/nnn License: BSD 2-Clause

I would highly appreciate if nnn can be added to the repository.

PackagesAnyFreedom IssueVery LowLow[arm-unknown-linux-gnueabi-gcc] not working; needs prop...Unconfirmed
0%
Task Description

Description:
I believe the arm-unknown-linux-gnueabi-gcc package to be broken as described here.

Additional info:
* package version(s) - arm-unknown-linux-gnueabi-gcc - all versions

Steps to reproduce:
I don’t think “steps to reproduce” to be relevant in this case. My forum topic linked above already contains all the necessary info on the subject :) However, one could try compiling glibc and busybox as described here. Yes, these are instructions for debian-like systems. They have to be adapted accordingly

PackagesAnyImplementation RequestVery LowMediumSupport of MPTCP (Multipath TCP) on HyperbolaUnconfirmed
0%
Task Description

Patch for 4.9 : https://multipath-tcp.org/patches/mptcp-v4.9-c88d1d56809e.patch

AUR : https://aur.archlinux.org/packages/linux-mptcp/

PackagesAnyImplementation RequestVery LowHighAdd MPTCP (MultiPath TCP) to HyperbolaUnconfirmed
0%
Task Description

https://aur.archlinux.org/packages/linux-mptcp/

Kernel Patch for 4.9 :
http://multipath-tcp.org/patches/mptcp-v4.9-c88d1d56809e.patch

Compile :
https://multipath-tcp.org/pmwiki.php/Users/DoItYourself

PackagesAnyBug ReportVery LowMedium[openrc] cannot load fuse at bootUnconfirmed
0%
Task Description

I added
<quote>modules=”fs-fuse”</quote>
to /etc/conf.d/modules (and also “fuse” instead).

I looked in /var/log/rc.log and I see this line

<quote>modprobe: FATAL: Module fs-fusetun not found in directory /lib/modules/4.9.194-gnu-1-lts</quote>

It looks like modprobe added “tun” to the filename which prevents loading the module.

PackagesAnyBug ReportVery LowMedium[exfat-utils] filesystem can only be mounted manuallyUnconfirmed
0%
Task Description

One can mount exfat by running commands such as “sudo modprobe fuse” and “sudo mount.exfat /dev/sdc1 /mnt/storage” but it is inconvenient.

Also, loading fuse at startup is problematic - see here:

https://issues.hyperbola.info/index.php?do=details&task_id=1433

PackagesAnyBug ReportVery LowHigh[rubyripper] GUI doesn't workUnconfirmed
0%
Task Description

rrip_gui does not work. The fix is to install cairo-gobject which is not in the repos. Attached is a working PKGBUILD adapted from the official one.

PackagesAnyImplementation RequestVery LowMedium[SPF][postfix] implement pypolicyd-spf and postfix-poli...Unconfirmed
0%
Task Description

Description:
Hyperbola has the following SPF implementations:
* libspf2
* perl-mail-spf
* perl-mail-spf-query

However, none of them work out of the box with postfix. There’s postfix-policyd-spf-perl, which uses one the current perl implementations (perl-mail-spf), takes no time to build and all the dependencies are already satisfied with Hyperbola’s packages

Here I made a PKGBUILD that’s compliant with the packaging standards:

pkgname=postfix-policyd-spf-perl
pkgver=2.011
pkgrel=1
pkgdesc='Postfix SPF policy engine, written in Perl'
arch=(i686 x86_64)
url='https://launchpad.net/postfix-policyd-spf-perl/'
license=(GPL)
depends=(perl-mail-spf perl-netaddr-ip perl-sys-hostname-long)
source=("https://launchpad.net/postfix-policyd-spf-perl/trunk/${pkgver}/+download/${pkgname}-${pkgver}.tar.gz"{,.asc})
sha512sums=('22fc00bf74912056a67e937a460ac1fd878f1cb1a3bfa7b19bc5f1e6bc1c36d815dcf8c945e818d242ed5e72a6295bb0e1569446e06b09aefb2842993b8016ba'
            'SKIP')
validpgpkeys=(E7729BFFBE85400FEEEE23B178D7DEFB9AD59AF1) # Scott Kitterman

package() {
  cd "${pkgname}-${pkgver}"

  install -Dm755 "${pkgname}" "${pkgdir}/usr/libexec/postfix/${pkgname}"
  install -Dm644 CHANGES INSTALL README -t "${pkgdir}/usr/share/doc/${pkgname}"
  install -Dm644 LICENSE "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
}

in the other hand, to give users the possibility of having more options, we could add pypolicyd-spf (AUR), which depends in pyspf (AUR) and other packages that Hyperbola has. In fact, ArchWiki talks about this implementation, but this might not be relevant.

PackagesAnySecurity IssueVery LowMediumDownload debian-fixes instead of relying on external so...Unconfirmed
0%
Task Description

It happened already with minetest and again with prosody: When trying to build own packages with makepkg there are patches downloaded from the Debian-project. But the given HTTP(S)-sources are no longer available, concrete example within prosody to be found: https://deb.debian.org/debian/pool/main/p/prosody/prosody_0.10.2-1~bpo9+1.debian.tar.xz (not available)

Please don’t rely on those external sources when creating PKGBUILD-files or just give users the possibility for a secure and granted download. Therefore I cannot build prosody on my own now!

PackagesAnyBug ReportVery LowLowXenocara xbacklight bugUnconfirmed
0%
Task Description

When i try to set the brightness on my screen, with xbacklight -set 100,

it does this:

No outputs have backlight property

and it doesn’t really matter if I set it lower than 100 or what it currently is at.

Fix when you can please!

PackagesAnyBug ReportVery LowLowlightdm/lxdm bugUnconfirmed
0%
Task Description

It appears when I plug in my libreboot laptop x200 in, it appears to dim the screen and when its unplugged, the screen is bright again. Something peculiar is at work, I wondered if this could be fixed.

My assumption is it is related to lxdm or lightdm. Any thoughts?

I am currently using 0.4, so I don’t expect this to be a fast process, just when you get a chance okay?

PackagesAnyFreedom IssueVery LowLow[hedgewars] Crash when starting a new singleplayer-camp...Unconfirmed
0%
Task Description

When trying to start a new campaign the complete game-engine is crashing with the following message:

Object::disconnect: Unexpected null parameter
QCoreApplication::postEvent: Unexpected null receiver

As ghc and fpc should be removed in the near future it would be good to validate this or otherwise remove the game-package itself also.

PackagesAnyImplementation RequestVery LowMedium[chdkptp] please add package to control Canon camerasUnconfirmed
0%
Task Description

CHDKPTP is part of CHDK project - a free software firmware add-on for Canon cameras. It enables controlling Canon cameras via the computer.

Attached is a modified iup PKGBUILD (Lua 5.3 build was removed as it failed to compile) and configuration files for chdkptp.

Code is available via svn:

$ svn co http://subversion.assembla.com/svn/chdkptp/trunk chdkptp

Copy chdkptp.sh and config.mk files to source tree then compile via make. chdkptp requires root privileges to connect to a camera.

PackagesAnyImplementation RequestVery LowLow[chdkptp] please add package to reposUnconfirmed
0%
Task Description

CHDKPTP is part of CHDK project - a free software firmware add-on for Canon cameras. It enables controlling Canon cameras via the computer.

Attached is a modified iup PKGBUILD (Lua 5.3 build was removed as it failed to compile) and configuration files for chdkptp.

Code is available via svn:

$ svn co http://subversion.assembla.com/svn/chdkptp/trunk chdkptp

Copy chdkptp.sh and config.mk files to source tree then compile via make. Requires root privileges to connect to a camera.

PackagesAnyFreedom IssueVery LowHighSynergy en teclado en español no tiene tildes ni ñUnconfirmed
0%
Task Description

Description:
Share a single mouse and keyboard between multiple computers, with libressl and OpenRC support

Issue:
Synergy no es capas de trasmitir tildes ni eñes y demás caracteres del español españa

Additional info:
* package version(s): community/synergy 1.8.8-2.hyperbola1
* config and/or log files etc.

Steps to reproduce:
instalarar synergy en 2 PCs con hyperbola 0.3, he intentar escribir tildes, no funcionará...

PackagesAnyFeature RequestDeferLow[php-imagick] add packageUnconfirmed
0%
Task Description

php-imagick is an optdepends for many PHP webapps like Nextcloud and Wordpress, would be good to have itin Hyperbola, Arch added it last year

PackagesAnySecurity IssueVery LowMediummount.davfs: unknown file system davfs due to paths cha...Unconfirmed
0%
Task Description

This is same issue as on:
https://bugzilla.redhat.com/show_bug.cgi?id=1151273

The paths changed and trying to mount davfs file system defined in /etc/fstab fails with error: unknown file system davfs

To remedy, I made symlink in /sbin to mount.davfs

The transition of paths had to take that in account as many mounted remote disks failed after upgrade.

PackagesAnyFreedom IssueVery LowLowCan 123.hp.com/setup help me to fix HP Printer error co...Unconfirmed
0%
Task Description

You will see this code on the control panel of the printer while you are trying to scan. It might show up when you try to scan some heavy book or documents. There is no need to worry as you can fix it easily by following these simple steps from 123.hp.com/setup:

  • Turn on the printer and wait till it is in an idle state
  • Remove the printer from the power supply and wait for a minute or so
  • Plug the cables back and reconnect the power cord utility to the back part of the printer and switch it on
  • Let it pass through the warm up stage and wait till the light on the printer blinks. This will fix the issue and try putting one sheet at a time in the scanner

If you still face any issue then just visit 123.hp.com/setup and get help instantly from the experts.

PackagesAnyFreedom IssueVery LowLowFix Your Epson Printer Offline TroubleshootingUnconfirmed
0%
Task Description

Epson printer offline is the most common issue users might face. This error basically occurs due to low network, USB cable not connected properly, etc. I am a technician and have received this complaint from various customers. However, I have been tackling such issues from the past many years. This [https://www.epsonprintersupportnumber.com/blog/how-to-bring-an-offline-epson-printer-online | Epson printer offline problem]] can easily be solved with a few steps. In case, you are also facing this error then you can get in touch with me. Your issue can be resolved instantly. I have high experience in the technical field and have been sorting out the issues of printer customers on a daily basis. If you want the instant fixing solution you can anytime connect with me and convey your printer issue. There is no restricted time and you can contact me anytime, 24*7. All you need to do is share the correct details of your printer model. You will instantly receive the fixing solution.

PackagesAnyFreedom IssueMediumLow[Hyperbola GNU/Linux 0.4] Reactivate ALSA for all UXP-a...Unconfirmed
0%
Task Description

Description: As sndio has its own problems I’d propose to reactivate ALSA for all UXP-applications.

ServicesFlyspray BrandingImplementation RequestMediumMediumAdd Hyperbola branding to HyperTaskIn Progress
40%
Task Description

Add Hyperbola branding to HyperTask such as HyperWiki and HyperForum for prolixity reasons.

ServicesFlyspray IssueImplementation RequestVery LowLowSetting avatar picture on flyspry at issues.hyperbola.i...Unconfirmed
0%
Task Description

So avatar uploading is not working well, and picture is getting minimized to nothing.

ServicesFlyspray IssueBug ReportVery LowMedium[Flyspray] long tags break the backendUnconfirmed
0%
Task Description

When I was adding this task, I put some long tags on it (html form allowed that) and got an error concerning too long tags field to fit in an sql datatype (max is 40 chars). Task got added anyway (just without tags). I didn’t know that and created it again.

ServicesFlyspray IssueSecurity IssueVery LowLowAfter account confirmation, crypt: No salt parameter wa...Unconfirmed
0%
Task Description

After confirming the newly created account (typing the confirmation code, the passwoard and its confirmation, and clicking the button to continue), the following error appears:

  Notice: crypt(): No salt parameter was specified. You must use a randomly generated salt and a strong hash function to produce a secure hash. in /srv/http/flyspray/includes/class.flyspray.php on line 656 

The account login seems to work normaly.

ServicesFlyspray IssueBug ReportVery LowMediumhypertask screen after write taskUnconfirmed
0%
Task Description

after write a task, hypertask show me this screen, and for some users think 'oh hypertask no works' attach image

Software DevelopmentGeneralImplementation RequestVery HighCriticalPOWER (ppc64le) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and the Power9-based Talos II promises to be a great architecture example for workstations and servers environments where Hyperbola is focused since is a fully free long-term support distribution.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the POWER architecture (power64le).

NOTE: POWER porting is focused only for Hyperbola GNU/Linux-libre .

Software DevelopmentGeneralImplementation RequestVery HighCriticalARM (aarch and armv7h) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and ARM A7/A53 promises to be a great architecture example for low-power computers, laptops and embedded systems.

NOTE: ARM porting is focused only for HyperbolaBSD .

Software DevelopmentGeneralImplementation RequestDeferCriticalRISC-V (riscv64) porting + multilib supportDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and RISC-V promises to be a great architecture example for low-power computers, laptops and embedded systems, also as ARM architecture replacement.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the RISC-V architecture (riscv64) with multilib support.

NOTE: RISC-V porting is focused only for Hyperbola GNU/Linux-libre .

Software DevelopmentGeneralBug ReportVery HighCritical[Hyperbola GNU/Linux-libre 0.4] Reworking xenocara and ...In Progress
0%
Task Description

Within the concurrent version of xenocara for version 0.4 there is a problem in vesa, generating the error-message "V_BIOS address 0x0 out of range". It is a known old bug that was fixed when D-Bus arrived by default.

This issue is oriented onto to document the steps to test further solutions and rework the x-server.

InstallationGeneralFeature RequestVery LowLow[calamares] add graphical installer with FDE supportResearching
0%
Task Description

Package Request: https://github.com/calamares/calamares

Original Bug Report:
— I would also like to test the beta isos when they are ready through qemu. If it looks good I plan to fully install them onto my laptop. My libreboot x200.

I don’t know if I should make a separate feature for this, but xfce is a good stable desktop environment for such a choice. that and lxde.

Though lxde is going to die...

InstallationGeneralImplementation RequestVery LowLowTo make installation instructions and get use of live I...Unconfirmed
0%
Task Description

I have installed multiple times Hyperbola, 4 times on 4 different notebooks.

What I have noticed is that the live ISO is quite huge in relation to the task that should be done. Namely. the live ISO shall at least contain some first packages, so that they do not need to be downloaded online.

Best would be if the live ISO can be copied straight and that system can run from ISO/DVD without having Internet. At least one simple graphical environment shall be included.

Further, I have noticed that there is only network instructions as HTML file.

I would rather call it installation-instructions.html to make it clear for people what it is. Or simply: INSTALL.html so that people understand what it is.

It says just network.html if I remember well.

Then there is absolutely no point or link or reference to the installation instructions.

Each time I got a network I had to go to either duckduckgo search engine or to hyperbola.info website and then I tried with lynx to find installation instructions.

It is not straight, not quite clearly in open, it is in Wiki, but that is quite hard to find.

We have to put ourselves in the shoes of those in need of free software. Millions of people need free software.

Many of us live in a developed western countries.

Yet millions of people in need of this software live in South America, Africa, Asia, Eastern Europe.

There are millions of students that could advance their study, and that could progress faster with free software.

In those countries Internet is often non-existent, universities may be located in poor network areas, Internet is being fetched by using mobile phones.

So if there is a live distribution, such shall at least contain basic software, which really can fit onto any DVD, and that as such can be copied on the computer without using Internet. Upgrades could be fetched by using Internet.

And there shall be clear reference, link or file about installation. There shall be no need to go to Internet to install the software.

ServicesGeneralFeature RequestVery LowLowhyperbola branding - add guidelines to packagesUnconfirmed
0%
Task Description

I could not find any regarding using arch or other branded themes. Parabola apparently rebrands some stuff in their libre repository, eg. they have their own parabola-themes-slim package for slim based themes.

https://issues.hyperbola.info/index.php?do=details&task_id=1213&opened=24&status[0]=

ServicesGeneralFreedom IssueVery LowLowWhy is my Epson printer offline?Unconfirmed
0%
Task Description

Do you ask yourself ‘why is my Epson printer offline’ even when it is turned on? If yes then you are in the right place as we are here to provide you a solution that will fix this issue.
If your printer is linked with an Ethernet cable then ensure that the cable is attached to the router and the printer in a proper manner. If you require an IP address then you can print a network configuration page.
If you are using a USB cable then you should check if it is loose or not. If you think that there is a problem with the USB cable then you can also connect it directly as an alternative to using a hub.
If it is a wireless connection then use the network configuration page to get the IP address and ensure that the printer and the system are both connected to one wifi connection.
https://www.printersupportpro.us/epson-printer-offline

Software DevelopmentGeneralBug ReportHighCriticalRunit errors,Unconfirmed
0%
Task Description

/sbin/openrc-run: bad interpreter: No such file or directory

I get this error whenever I try to start dhcpcd with sv /etc/runit/

And for sndiod I get this doing the same guide,

warning: sndiod: unable to open supervise/ok: file does not exist

Although rather ironically, If I type sndiod or dhcpcd into root, it works just fine.

Maybe its an FHS issue or possibly, I am screwing up? I am not sure. Feedback is welcome.

This is what I did:

=⇒ Add a service:

ln -s /etc/sv/<service> /var/service
==> Start/stop/restart a service:
sv <start/stop/restart> <service>

more or less, I used this guide.

Showing tasks 301 - 350 of 407 Page 7 of 9<<First - 5 - 6 - 7 - 8 - 9 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing