All Projects

ProjectCategoryTask TypePriority  descSeveritySummaryStatusProgress
PackagesAnyFreedom IssueMediumLow[python-biopython]: using vague "freely" term in descri...Deferred
0%
Task Description
community/python-biopython 1.69-1
    Freely available Python tools for computational molecular biology

See:
https://www.gnu.org/philosophy/words-to-avoid.html#FreelyAvailable

Don’t use “freely available software” as a synonym for “free software.” The terms are not equivalent. Software is “freely available” if anyone can easily get a copy. “Free software” is defined in terms of the freedom of users that have a copy of it. These are answers to different questions.

PackagesAnyFreedom IssueMediumLow[python2-biopython]: using vague "freely available" ter...Deferred
0%
Task Description
community/python2-biopython 1.69-1
    Freely available Python tools for computational molecular biology

See:
https://www.gnu.org/philosophy/words-to-avoid.html#FreelyAvailable

Don’t use “freely available software” as a synonym for “free software.” The terms are not equivalent. Software is “freely available” if anyone can easily get a copy. “Free software” is defined in terms of the freedom of users that have a copy of it. These are answers to different questions.

PackagesAnyFreedom IssueMediumLow[man-pages-de]: using kernel name without operating sys...Deferred
0%
Task Description

Description:

community/man-pages-de 1.22-1
     German Linux man pages

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

PackagesAnyFreedom IssueMediumLow[man-pages-ru]: using kernel name without operating sys...Deferred
0%
Task Description

Description:

community/man-pages-ru 4.08_2329_2272_20170321-2
     Russian Linux man pages

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

PackagesAnyFreedom IssueMediumLow[man-pages-zh_cn]: using kernel name without operating ...Deferred
0%
Task Description

Description:

community/man-pages-zh_cn 1.6.3.1-1
     Simplified Chinese Linux man pages

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

PackagesAnyFreedom IssueMediumLow[man-pages-zh_tw]: using kernel name without operating ...Deferred
0%
Task Description

Description:

community/man-pages-zh_tw 1.6.3.1-1
     Traditional Chinese Linux man pages

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

PackagesAnyFreedom IssueMediumLow[Hyperbola GNU/Linux 0.4] Reactivate ALSA for all UXP-a...Unconfirmed
0%
Task Description

Description: As sndio has its own problems I’d propose to reactivate ALSA for all UXP-applications.

PackagesAnyFeature RequestMediumMedium[epiphany] restore the hidden setting to disable JavaSc...Researching
0%
Task Description

Please restore the hidden setting (which can be enabled via dconf-editor) to disable JavaScript, which was removed last year (see here for details: https://github.com/GNOME/epiphany/blob/master/NEWS ).
Please do not remove the browser from the repos, as it renders this website correctly, unlike Mozlla based browsers (see here for more info: https://issues.hyperbola.info/index.php?do=details&task_id=131). The browser also provides other functions currently unavailable in Mozilla browsers, such as accessing LibreCMC router’s non-SSL web interface.

PackagesAnyFeature RequestMediumLow[cinnamon] add elogind supportResearching
0%
Task Description

Cinnamon currently does not support elogind, and depends on systemd. A patch is needed to fix this issue.

PackagesAnyFeature RequestMediumMedium[pybitmessage] Package RequestUnconfirmed
0%
Task Description

PyBitmessage is a secure p2p e-mail alternative. It could be useful to package it.

https://github.com/Bitmessage/PyBitmessage/releases https://aur.archlinux.org/packages/pybitmessage/ https://aur.archlinux.org/packages/pybitmessage-git/ (contains a firejail profile)

PackagesAnyFeature RequestMediumMedium[DCPT500W] possible integration of drivers to cups on P...Assigned
0%
Task Description

Hi guys, I have ever run into a Brother brand printer model DCPT500W[0], and I have seen that the source code for the drivers under GPLv3 license is available.

I also see that there is a file brother_dcpt500w_printer_en.ppd, which is important for cups, which is why it may be necessary to integrate it into the cups, as long as the drivers are Libre.

[0]:https://download.brother.com/welcome/dlf101963/dcpt500w_cupswrapper_GPL_source_3.0.2-0.tar.gz

PackagesAnyFeature RequestMediumHigh[supervisor] contains systemd unit fileIn Progress
0%
Task Description

The Arch version of “supervisor” from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the a global ruleset for INIT-freedom, systemd unit files removal is required and adding support for other init-systems (preferred OpenRC for now) to replace it.

Software DevelopmentGeneralFeature RequestMediumLow[Website] Rework for the onion-pageUnconfirmed
0%
Task Description

As proposed in a separate thread (https://forums.hyperbola.info/viewtopic.php?id=573): The navigation-bar needs a rework when accessing the website about the onion-protocol.

PackagesAnyDrop RequestMediumMedium[gksu] is replaced and has to be deleted from our pacma...Researching
0%
Task Description

Description:
From the author’s webpage gksu has been replaced.

Additional info:
* package version(s) : extra/gksu 2.0.2-5

http://www.nongnu.org/gksu/

PackagesAnyBug ReportMediumMedium[rxvt-unicode] rc-status command print "bug" tableResearching
0%
Task Description

If you do a command line rc-status on urxvt terminal, the name of the column of services are hidden. You will only see the status columns. Example:

Runlevel: default
  started  ]
  started  ]
  started  ]
  started  ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
Dynamic Runlevel: hotplugged
Dynamic Runlevel: needed/wanted
  started  ]
  started  ]
  started  ]d
Dynamic Runlevel: manual
PackagesStableBug ReportMediumMedium[linux-libre-lts] [i915] Display freeze : hpd interrupt...Deferred
0%
Task Description

Hello,

I recently acquired a T400 Thinkpad with 1440×900 panel.
On this T400, I installed Hyperbola, just like on my x200 Thinkpad with 1280×800 panel.

Both Thinkpad are running the same Hyperbola installation :

Full disk encryption (with Libreboot) so both Thinkpad are using early KMS (MODULES=”i915” in /etc/mkinitcpio.conf)
Same kernel : linux-libre-lts (4.9.99 at the moment I’m writing this message)
video driver : modesetting
DE : xfce4 with xfwm4

On the Thinkpad x200, everything works great, no issue to report.

On the T400 though, the linux-libre-lts kernel, I’m getting random display freezes, when it happens, this message appears in dmesg :

hpd interrupt storm detected on connector hdmi-a-1

And the display (and sound) freezes for 10 seconds (sometimes more !)

As Hyperbola proposes linux-libre-lts kernel only, I installed latest linux-libre-lts (4.14.40) and linux-libre (4.16.8) from Parabola GNU/Linux repo.

Results :

With 4.14.40 : Same issue as with 4.9.99 kernel from Hyperbola repo.
With 4.16.8 : Issue is not present ! No more freeze !

I’m not sure how to proceed though. Would you be kind enough helping me to find which commit in i915 driver improved the situation ? If we find it, maybe it could be added as a patch to 4.9.x kernel series.
Or maybe it is something else.. I don’t have much experience, I can provide logs if needed.

Thanks for your help

PackagesTestingBug ReportMediumMedium[emacs] crush after swayResearching
0%
Task Description

I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:

1. Run sway
2. Exit sway or killall sway
3. Try running emacs on console, there will be crush
4. log out, log in, and emacs will work on console again

Yet it should not crush.

PackagesStableBug ReportMediumMedium[virt-install] ERROR '_OsVariant' object has no attribu...Requires Testing
100%
Task Description

Trying to create a VM using virt-install (1.4.1-2.hyperbola2)

virt-install --connect qemu:///system \
--name debian \
--ram 1024 \
--disk path=/home/test/debian.img,size=50 \
--vcpus 2 \
--os-type linux \
--os-variant generic \
--network bridge=virbr0 \
--graphics none \
--console pty,target_type=serial \
--location 'http://ftp.nl.debian.org/debian/dists/stretch/main/installer-amd64/' \
--extra-args 'console=ttyS0,115200n8 serial'

This error shows up :
ERROR : ‘_OsVariant’ object has no attribute ‘urldistro’

I can’t create the VM.

PS : Error is not present on Debian Stretch with virt-install 1.4.0-5

Thanks for your help.

PackagesAnyBug ReportMediumMedium[lxmusic]package needs rebuilding as it fails to runIn Progress
0%
Task Description

Rebuilt version (using PKGBUILD from Arch) works fine. Same is true for lxmusic-gtk3 (which the PKGBUILD also builds).

https://git.archlinux.org/svntogit/community.git/tree/trunk?h=packages/lxmusic

PackagesAnyBug ReportMediumHigh[notmuch-mutt] missing requirementResearching
0%
Task Description

Description:
notmuch-mutt fails to compile without perl-mail-message which is missing in Hyperbola

Steps to reproduce:
Install notmuch-mutt and try `notmuch-mutt` at the command line. Then install `perl-mail-message` from Arch and try again.

PackagesStableBug ReportMediumCritical[torsocks] which: no getcapRequires Testing
90%
Task Description

Current torsocks version is broken.
It returns the following error when attempting to torify application :

which: no getcap
PackagesStableBug ReportMediumHighopensmtpd: permission problemsIn Progress
0%
Task Description

Description:

cat msg | /usr/sbin/sendmail – sendmail: No such file or directorycannot create temporary file /var/spool/smtpd/offline/1572544775.XXXXIqNsFX

Additional info:
* package version: 6.4.2p1-1.hyperbola2.backports1

It is same problem as here:
https://github.com/OpenSMTPD/OpenSMTPD/issues/839

I could solve it with:

sudo chmod g+s /usr/sbin/smtpctl
sudo chmod g+s /usr/sbin/smtpctl

and then

sudo rc-service smtpd start

Even though I think I should not need to start it to use only sendmail.

PackagesAnyBug ReportMediumHigh[gstreamer] needed rebuildIn Progress
70%
Task Description

(gst-plugin-scanner:17336): GStreamer-WARNING : Failed to load plugin ‘/usr/lib/gstreamer-1.0/libgstzbar.so’: libzbar.so.0: cannot open shared object file: No such file or directory
(gst-plugin-scanner:17336): GStreamer-WARNING
: Failed to load plugin ‘/usr/lib/gstreamer-1.0/libgstfluidsynthmidi.so’: libfluidsynth.so.1: cannot open shared object file: No such file or directory

Repositorio : extra
Nombre : gstreamer
Versión : 1.12.0-1
Descripción : GStreamer open-source multimedia framework core library
Arquitectura : x86_64
URL : https://gstreamer.freedesktop.org/ Licencias : LGPL Grupos : Nada
Provee : Nada
Depende de : libxml2 glib2 libunwind libcap libelf
Dependencias opcionales : Nada
En conflicto con : Nada
Remplaza a : Nada
Tamaño de la descarga : 1897,45 KiB
Tamaño de la instalación : 17241,00 KiB
Encargado : Jan Alexander Steffens (heftig) jan.steffens@gmail.com Fecha de creación : jue 04 may 2017 14:13:05 -05
Validado por : Suma MD5 Suma SHA-256 Firma

PackagesAnyBug ReportMediumCritical[ath9k-htc-firmware]: not workRequires Testing
50%
Task Description

Description:

Ath9k wifi device not working, possibly bad compilation or issues with gcc

Additional info:
* package version(s)

- gcc-8.4.0-2
- ath9k-htc-firmware-1.4.0-8

* config and/or log files etc.

[    8.302952] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[    8.303011] usbcore: registered new interface driver ath9k_htc
[    8.303067] usb 1-1: Direct firmware load for ath9k_htc/htc_9271-1.4.0.fw failed with error -2
[    8.303073] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested
[    8.623141] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51008
[    9.683657] ath9k_htc 1-1:1.0: ath9k_htc: Target is unresponsive
[    9.683672] ath9k_htc: Failed to initialize the device

Steps to reproduce:

- Add wifi device with ath9k firmware, for example: TL-WN722N
- pacman -S ath9k-htc-firmware

References:

- https://bugzilla.kernel.org/show_bug.cgi?id=208251

Software Developmentchroot-nspawnBug ReportMediumMedium[chroot-nspawn] Create mount points if mountpoint exit ...Unconfirmed
0%
Task Description

The actual behavior is to create mount points if mountpoint exits with exit status 1, however it may also exit with code 32 and thus creating a real mess:

$ sudo chroot-nspawn
Spawning container megver83 on /var/lib/archbuild/chroot1/megver83
Press ^] three times within 1s to kill container.
mount: /sys/fs/cgroup: mount point does not exist.
mkdir: cannot create directory '/sys/fs/cgroup/blkio': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/cpu': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/cpuacct': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/cpu,cpuacct': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/cpuset': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/devices': No such file or directory  
mkdir: cannot create directory '/sys/fs/cgroup/freezer': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/memory': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/net_cls': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/net_cls,net_prio': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/net_prio': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/pids': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/systemd': No such file or directory
mount: /sys/fs/cgroup/blkio: mount point does not exist.
mount: /sys/fs/cgroup/cpuset: mount point does not exist.
mount: /sys/fs/cgroup/devices: mount point does not exist.
mount: /sys/fs/cgroup/freezer: mount point does not exist.
mount: /sys/fs/cgroup/memory: mount point does not exist.
mount: /sys/fs/cgroup/pids: mount point does not exist.

So I created a patch to fix this.

P.S.: although I can git clone the repo with ssh access, whenever I do a push I get:

error: remote unpack failed: unable to create temporary object directory
To ssh://git.hyperbola.info:51100/~git/software/chroot-nspawn.git
 ! [remote rejected] master -> master (unpacker error)
error: failed to push some refs to 'ssh://git.hyperbola.info:51100/~git/software/chroot-nspawn.git'

Do I have the permission to write in this repo? If not, I’d like it, as I’m planning to improve this great script

PackagesTestingBug ReportMediumMedium[Hyperbola GNU/Linux 0.4] Problems with touch- / trackp...Assigned
0%
Task Description

Description: Not finally tested, only getting the logs from chat within here for better analysis later on. User reported that touchpad is not working for now with Hyperbola GNU/Linux 0.4. dmesg-messagelog:

[anonymous@anonymous ~]$ dmesg | grep pad
[ 4.766853] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[ 4.823723] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0×840300/0x2e800/0×0, board id: 3127, fw id: 8526786

PackagesTestingBug ReportMediumMedium[Hyperbola GNU/Linux 0.4] Problems with ALSA and sndio ...Unconfirmed
0%
Task Description

Description: User reporting problems with sndio. A further check with ALSA showed no active device being used. User has HDMI-sound in usage.

PackagesTestingBug ReportMediumMedium[Hyperbola GNU/Linux-libre 0.4] - Package [android-file...Researching
0%
Task Description

Application is not starting and needs therefore a rework.

PackagesAnyReplace RequestLowLow[appmenu-qt4] replace with appmenu-qt (qt5)Deferred
0%
Task Description

“appmenu-qt4”[0][2] is a deprecated package (release in 2012)[1] and use qt4 unsupported/non-lts software[3], but “appmenu-qt5” not contains any release source code[2]

$ pacman -Si appmenu-qt4
Repository : community
Name : appmenu-qt4
Version : 0.2.6-1
Description : Export Qt4 applications menus over D-Bus
Architecture : x86_64
URL : https://launchpad.net/appmenu-qt Licenses : GPL Groups : None
Provides : None
Depends On : libdbusmenu-qt4
Optional Deps : None
Conflicts With : appmenu-qt
Replaces : appmenu-qt
Download Size : 16.55 KiB
Installed Size : 48.00 KiB
Packager : Antonio Rojas arojas@archlinux.org Build Date : Tue 28 Feb 2017 05:59:31 AM -03
Validated By : MD5 Sum SHA-256 Sum Signature

[0]:https://launchpad.net/appmenu-qt (qt4)
[1]:https://launchpad.net/appmenu-qt/+download [2]:https://launchpad.net/appmenu-qt5 [3]:https://en.wikipedia.org/wiki/Qt_5.6_LTS

Software DevelopmentHyperToolsImplementation RequestLowLow[hypertools] create libretools replacement for Hyperbol...Deferred
0%
Task Description

Create hypertools to replace libretools package for HyperbolaBSD and GNU/Linux

It’s long period to develop this package.
For now, a systemd-nspawn wrapper is being developed for “libretools”[0]

[0]:https://issues.hyperbola.info/index.php?do=details&task_id=86

PackagesAnyImplementation RequestLowLow[nut] add Network UPS Tools 2.7.x packageAssigned
0%
Task Description

Add “nut” package.

Useful for uninterruptible power supplies, power distribution units, solar controllers and servers power supply units.

PackagesTestingImplementation RequestLowMedium[spacefm] add new packageIn Progress
0%
Task Description

Add SpaceFM File Manager for Hyperbola

Aur Package: spacefm Debian Package: spacefm

PackagesAnyImplementation RequestLowLow[codecrypt] add new packageUnconfirmed
0%
Task Description

This is a GnuPG-like unix program for encryption and signing that uses only quantum-computer-resistant algorithms:

  McEliece cryptosystem (compact QC-MDPC variant) for encryption
  Hash-based Merkle tree algorithm (FMTSeq variant) for digital signatures

Codecrypt is free software. The code is licensed under terms of LGPL3 in a good hope that it will make combinations with other tools easier.

PackagesAnyImplementation RequestLowLow[opmsg] add new packageResearching
0%
Task Description

Description: opmsg is a replacement for gpg which can encrypt/sign/verify your mails or create/verify detached signatures of local files. Even though the opmsg output looks similar, the concept is entirely different.

Additional info:
https://aur.archlinux.org/packages/opmsg/

PackagesAnyFeature RequestLowLow[scribus] missing hunspell supportUnconfirmed
0%
Task Description

I have noticed that the version of scribus that is available in hyperbola does not have the option of spelling correction and by references of the official scribus channel indicate that scribus has to be built with hunspell. I do not understand how that is done, I just need to be able to correct spelling from scribus.

PackagesAnyFeature RequestLowLow[npapi-vlc] package from git sourceUnconfirmed
0%
Task Description

Description: As mentioned in Bug #18, our VLC plugin was not maintained in some time and the deprecated addon was removed. However, upstream is actively working on the plugin as per: https://code.videolan.org/videolan/npapi-vlc/tree/master

We should build this from source and re-package.

PackagesAnyBug ReportLowMedium[cryptsetup] when dmcrypt start, the "/" filesystem, m...Assigned
0%
Task Description

When dmcrypt service start, the “/” filesystem is remounted, mtab is updated and bootmisc is recording the login users, by waiting time scheduling:

* root: waiting for dmcrypt (50 seconds)
* root: timed out waiting for dmcrypt
* Remounting root filesystem read/write ...
* Remounting filesystems ...
* mtab: waiting for dmcrypt (50 seconds)
* mtab: timed out waiting for dmcrypt
* Updating /etc/mtab ...
* Creating mtab symbolic link
* bootmisc: waiting to dmcrypt (50 seconds)
* bootmisc: timed out waiting for dmcrypt
* Creating user login records ...

These features on dmcrypt service are useless and these lines print above filesystem passphrase order (the printed line), those ones break printed console and print the pressed keyboard digit when I’m setting up password.
Sometimes this breaks services startup, and I need press “enter” consecutively to allow run the services.

PackagesAnyBug ReportLowMedium[cryptsetup] can't umount luks filesystem on reboot/shu...Assigned
0%
Task Description

dmcrypt service can’t umount luks filesystem on reboot/shutdown, device or resource busy:

* Removing dm-crypt mappings
* foobar-pv
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
Device foobar-pv is still in use                                              [ !! ]
PackagesAnyBug ReportLowLow[usbutils] lsusb does not list device namesIn Progress
0%
Task Description

Description:

lsusb does not resolve device names from /var/lib/usbutils/usb.ids

The same thing as described here: https://unix.stackexchange.com/questions/220759/lsusb-doesnt-list-device-names

PackagesAnyBug ReportLowLow[erlang-nox] uses "nox" suffixIn Progress
0%
Task Description

Description:

  • Fix package name to erlang-headless that is the correct name for packages without graphical user interface support. nox suffix is incorrect because Hyperbola supports Wayland too, not only X.Org.

Additional info:
* package version(s)

  • 19.3-3

* config and/or log files etc.

Steps to reproduce:

  • None
PackagesAnyBug ReportLowLow[qbittorrent-nox] uses "nox" suffixIn Progress
0%
Task Description

Description:

  • Fix package name to qbittorrent-headless that is the correct name for packages without graphical user interface support. nox suffix is incorrect because Hyperbola supports Wayland too, not only X.Org.

Additional info:
* package version(s)

  • 3.3.11-1

* config and/or log files etc.

Steps to reproduce:

  • None
PackagesStableBug ReportLowMediumGarbled display with xfce4-terminal (terminfo)Unconfirmed
0%
Task Description

A very nasty bug I wasn’t able to find an answer to.
I compiled stuff (buildroot) using menuconfig, the menu display was fine in xfce4-terminal (See screenshot #1)
I restarted the config a few days later with the same command :

$ make menuconfig

and this time the display was messed up (See screenshot #2)

After investigation, I noticed a directory (filled with stuff) have been created in my home folder :

.terminfo

I don’t know why. But anyway, if I delete it, then the display is ok again.
I noticed that if I use good old xterm terminal, then the display is fine even if the .terminfo directory is present. (it uses “xterm” instead of xterm-256color)

But, with xfce4-terminal (and others, I tried with gnome-terminal, sakura..), the display is messed up if the .terminfo directory is present in my home folder.

I also noticed that if I run the command in a screen session, the issue is not present.

(I open xfce4-terminal)

$ screen
$ printenv TERM
screen.xterm-256color
$ make menuconfig (or htop, or other program using ncurses)

= display ok

but with default :

(I open xfce4-terminal)

$ printenv TERM
xterm-256color
make menuconfig (or htop, or other program using ncurses)

= display messed up if .terminfo directory is present

So I have no idea why this .terminfo directory is generated. What could trigger its generation ? Is that an issue with ncurses or something else ?

Thanks for your help

PackagesAnyBug ReportLowLow[crystal] error build InvidiousResearching
0%
Task Description

Description:

crystal build src/invidious.cr –release

Error in src/invidious.cr:19: while requiring "kemal"

require "kemal"
^

in lib/kemal/src/kemal.cr:4: while requiring "./kemal/*"

require "./kemal/*"
^

in lib/kemal/src/kemal/config.cr:26: expanding macro

    property static_headers : (HTTP::Server::Response, String, File::Info -> Void)?
    ^~~~~~~~

in lib/kemal/src/kemal/config.cr:26: expanding macro

    property static_headers : (HTTP::Server::Response, String, File::Info -> Void)?
    ^

in macro 'property' expanded macro: macro_48177600:567, line 4:

   1.       
   2.         
   3.           
>  4.             @static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil
   5. 
   6.             def static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil
   7.               @static_headers
   8.             end
   9. 
  10.             def static_headers=(@static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil)
  11.             end
  12.           
  13.         
  14.       
  15.     

undefined constant File::Info

Additional info:
* package version(s)

Crystal 0.22.0 (2017-04-22) LLVM 4.0.0

Steps to reproduce:

PackagesAnyBug ReportLowHigh[kaccounts-integration] option to add NextCloud/OwnClou...Unconfirmed
0%
Task Description

Description:

  • Option to add NextCloud/OwnCloud accounts in ‘Online Accounts’ section of System Settings not appearing.

Additional info:
* package version(s)

  • 17.04.0-1

* config and/or log files etc.

  • N/A

Steps to reproduce:

  • Run application
  • Go to ‘Online Accounts’ section of System Settings
PackagesAnyBug ReportLowHigh[kdenetwork-kopete] clicking to add an Jabber Account o...Unconfirmed
0%
Task Description

Description:

  • Clicking to add an Jabber Account opens a dialog with no fields to enter information.

Additional info:
* package version(s)

  • 17.04.0-3.hyperbola1

* config and/or log files etc.

  • N/A

Steps to reproduce:

  • Run Application
  • Clicking to add an Jabber Account
PackagesAnyBug ReportLowHigh[xfce4-power-manager] locking session issueRequires Testing
90%
Task Description

I probably should’ve mentioned this before, but if it is set to suspend when lid is closed, it should automatically lock. if the security option: lock screen with system is set to sleep is tweaked on it doesn’t lock always.

This is word for word what I wrote in the forums, but yeah... it is a problem say if someone wants to use your laptop without your permission and can do so.

But it is also a problem if you set it to lock instead because it is more prone to overheating when your not using it, and it doesn’t suspend quickly enough.

I have tried this many times and the same story can be told, again and again.

I think this issue should be considered high or critical merely because of the privacy risk if someone gets their hands on your laptop while its on. Even if you have been away... :/

I wonder if anyone else has this issue... well you guys will tell me I am sure. if critical doesn’t match what you think I am sure you will change it. ;)

PackagesAnyUpdate RequestVery LowHigh[proj]: please update to latest versionUnconfirmed
0%
Task Description

Description:

https://proj4.org/index.html

This package have valuable geodetic applications, and I intend to present Hyperbola GNU/Linux-libre soon in universities and schools in East Africa.

The coordinate system there is not WGS84 and this package only in new version is providing the conversion from East African geographic coordinates to WGS84, and will be very usable in many industrial and private applications.

PackagesAnyUpdate RequestVery LowHigh[mpv] request for package bumpUnconfirmed
0%
Task Description

Hello,

Would it be possible to get a package bump for mpv ?

Currently, Debian Buster (stable) uses 0.29.1-1. This would be great as it introduces many fixes and support for lua scripts I heavily use.
0.29.* requires a ffmpeg to 4.x series as well.

Thanks.

PackagesStableUpdate RequestVery LowLow[icewm] Upgrade package versionUnconfirmed
0%
Task Description

The current version of the package icewm within the Hyperbola-repositories is 1.3.8. The latest version is 1.6.3!
An update would be helpful as this window-manager follows absolutely the principles of the distribution Hyperbola itself, being simple and fast.

PackagesStableUpdate RequestVery LowMedium[varnish] Missing init scriptUnconfirmed
0%
Task Description

Description:

Init script is missing for this package.

I think has some systemd dependecies.

/tmp/alpm_sYmHUS/.INSTALL: line 7: systemd-sysusers: command not found
error: command failed to execute correctly

package version: varnish-5.1.2-1

Showing tasks 151 - 200 of 511 Page 4 of 11<<First - 2 - 3 - 4 - 5 - 6 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing