All Projects

ProjectCategoryTask TypePrioritySeverity  ascSummaryStatusProgress
PackagesStableBug ReportVery LowVery LowGajim "Unable to run gpg - it may not be available" Assigned
0%
Task Description

Description:

Gajim XMPP Client wont start after installing python2-gnupg.

Additional info:
* package version(s)

  community/python2-gnupg 0.4.0-2
  extra/gajim 0.16.8-1.hyperbola2

* config and/or log files etc.

/usr/lib/python2.7/site-packages/gajim/common/gajim.py

Steps to reproduce:

With Gajim working is not possible to assign an OpenPGP key because it needs a wrapper. Therefore python2-gnupgp package is needed. But after installing python2-gnupgp, Gajim doesn’t start. The following output is displayed from the console:


07/21/2018 18:00:41 (E) gajim.c.gnupg Unable to run gpg - it may not be available.
Traceback (most recent call last):

File "/usr/lib/python2.7/site-packages/gnupg.py", line 757, in __init__
  p = self._open_subprocess(["--version"])
File "/usr/lib/python2.7/site-packages/gnupg.py", line 832, in _open_subprocess
  startupinfo=si)
File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
  errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
  raise child_exception

OSError: [Errno 2] No such file or directory
Traceback (most recent call last):

File "gajim.py", line 513, in <module>
  interface.run()
File "/usr/lib/python2.7/site-packages/gajim/gui_interface.py", line 2704, in run
  self.roster = roster_window.RosterWindow()
File "/usr/lib/python2.7/site-packages/gajim/roster_window.py", line 6611, in __init__
  connection_zeroconf.ConnectionZeroconf(gajim.ZEROCONF_ACC_NAME)
File "/usr/lib/python2.7/site-packages/gajim/common/zeroconf/connection_zeroconf.py", line 68, in __init__
  CommonConnection.__init__(self, name)
File "/usr/lib/python2.7/site-packages/gajim/common/connection.py", line 150, in __init__
  self.gpg = gpg.GnuPG()
File "/usr/lib/python2.7/site-packages/gajim/common/gpg.py", line 37, in __init__
  gnupg.GPG.__init__(self, gpgbinary=gajim.GPG_BINARY, use_agent=use_agent)
File "/usr/lib/python2.7/site-packages/gnupg.py", line 761, in __init__
  raise OSError(msg)

OSError: Unable to run gpg - it may not be available.


After doing some search, the issue is that gajim.py is trying to call ‘gpg’ as ‘gpg1’.

# grep -n GPG_BINARY /usr/lib/python2.7/site-packages/gajim/common/gajim.py
162:GPG_BINARY = ‘gpg1’

By replacing ‘gpg’ instead of ‘gpg1’, Gajim will start normally with OpenPGP feature available.

Maybe a newer revision of python2-gnupg is required or maybe a small patch in the current package.

PackagesStableBug ReportVery LowVery Low[spamassassin] has different directory permissions than...Deferred
0%
Task Description

Description:
The /usr/sbin directory in spamassassin has permissions 755
https://git.hyperbola.info:50100/packages/extra.git/tree/spamassassin/PKGBUILD#n88

And ‘filesystem’ sets it to 750
https://git.hyperbola.info:50100/packages/core.git/tree/filesystem/PKGBUILD#n135

So when installing spamassassin, pacman throws a warning

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

Additional info:
* spamassassin 3.4.2-1.hyperbola2

PackagesStableBug ReportVery LowVery Low[postfix] has different directory permissions than 'fil...Deferred
0%
Task Description

Description:
The /usr/sbin directory in postfix has permissions 755
https://git.hyperbola.info:50100/packages/extra.git/tree/postfix/PKGBUILD#n115

And ‘filesystem’ sets it to 750
https://git.hyperbola.info:50100/packages/core.git/tree/filesystem/PKGBUILD#n135

So when installing postfix, pacman throws a warning

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

Additional info:
* postfix-3.2.2-1.hyperbola6

PackagesStableBug ReportVery LowVery Low[fail2ban] update dovecot failregex to support verbose ...Unconfirmed
0%
Task Description

Description:
The /etc/fail2ban/filter.d/dovecot.conf file has a failregex with the following:

^%(__prefix_line)s(?:auth|auth-worker\(\d+\)): (?:pam|passwd-file)\(\S+,<HOST>\): unknown user\s*$

and works with things like:

Month day time hostname dovecot: auth: passwd-file(user@domain.com,IP): unknown user

but with verbosity enabled in Dovecot, this output looks like this:

Month day time hostname dovecot: auth: passwd-file(user@domain.com,IP): unknown user (given password: password)

and in this case it doesn’t work, but it does if we fix the failregex if we replace it with:

^%(__prefix_line)s(?:auth|auth-worker\(\d+\)): (?:pam|passwd-file)\(\S+,<HOST>\): unknown user( \(given password: \S*\))?\s*$

with this new expression, it works with and without verbosity

And regarding postfix, to make it work correctly I “backported” some pieces from newest failregex:

/etc/fail2ban/postfixr-rbl.conf:

^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[<HOST>\]: [45]54 [45]\.7\.1 Service unavailable; Client host \[\S+\] blocked using .* from=<\S*> to=<\S+> proto=ESMTP helo=<\S*>$

/etc/fail2ban/postfix.conf: (second failregex)

^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[<HOST>\]: 45[04] 4\.7\.1 Client host rejected: cannot find your (reverse )?hostname, (\[\S*\]); from=<\S*> to=<\S+> proto=ESMTP helo=<\S*>$

I can create a patch if you want. Note that I haven’t tested all filters, some others may also need some rework

Additional info:
* fail2ban-0.9.6-2.hyperbola3

Software DevelopmentIceweasel-UXPBackport RequestVery LowVery LowRequest browser add-on: FireGesturesUnconfirmed
0%
Task Description

Name: FireGestures
Version: 1.11.1 (compatible Firefox version 52)
Source code: Github
Description: A customizable mouse gestures extension which enables to execute various commands and user scripts with six types of gestures.

https://github.com/gomita/firegestures/

https://addons.mozilla.org/en-US/firefox/addon/firegestures/

PackagesAnyFeature RequestVery LowVery Low[ttf-iosevka] add Iosevka fontDeferred
0%
Task Description

Iosevka wins a poll about most beautiful fonts on reddit (/r/linux). This font is very similar than Droid Sans (Official Google Font) with many advantages:

1 - Has 5 types modes (lightest, light, normal, bold, super bold)
2 - Condensed and big sizes (perfect for visual impairments users)
3 - Very Legible on i3-wm, Sway, Conky bar
4 - OTF license (Freedom license)

Iosevka is already on AUR, but create a official package prevent bug or proprietary third parties apps (Yaourt, etc) be installed by beginners Hyperbola users.

Official Site:
https://github.com/be5invis/Iosevka

On AUR:
https://aur.archlinux.org/packages/ttf-iosevka

PackagesAnyFeature RequestVery LowVery LowDreamchess package wantedUnconfirmed
0%
Task Description

this package is under gpl3. It is the most reasonable chess game because it can be easy or hard depending on your preference.

PackagesAnyBackport RequestVery LowVery LowIcetray for Iceape-uxpAssigned
0%
Task Description

This already works for it, but I just thought I would request it to be put in.

PackagesTestingImplementation RequestVery LowLow[sirikata] add packageDeferred
0%
Task Description

Sirikata a platform for virtual worlds.

Sirikata is a platform for virtual worlds. We provide a set of libraries and protocols which can be used to deploy a virtual world, as well as fully featured sample implementations of services for hosting and deploying these worlds.

Please implement sirikata as an optional package.

PackagesStableBug ReportVery LowLowMupen64plus acts buggyUnconfirmed
0%
Task Description

the screen moves back and forth from left to right randomly, no matter what I do, any games any adapters do not work.

I wanted to have some fun with some old games...

Has anyone used mupen64plus successfully on hyperbola 0.2? I cannot get it to work without being completely confusing for the reasons I have mentioned and also, the glaring of the screen. Which only happens with mupen64plus...

PackagesStableFeature RequestVery LowLow[digikam]: /usr/bin/cleanup_digikamdb: line 61: kreadco...Unconfirmed
0%
Task Description

Description:

I just guess that this script cleanup_digikamdb depends on kreadconfig which is not there.

Additional info:

extra/digikam 5.5.0-2.hyperbola1 [installed]

  Digital photo management application for KDE

Steps to reproduce:

$ cleanup_digikamdb

/usr/bin/cleanup_digikamdb: line 61: kreadconfig: command not found


                  Cleanup Databases v1.1 (digiKam )                    

————————————————————————-
/usr/bin/cleanup_digikamdb: line 61: kreadconfig: command not found
This program only handles SQLite databases.
[~]

PackagesStableFeature RequestVery LowLow[iceweasel-uxp] Request browser add-on: Privacy Setting...Unconfirmed
0%
Task Description

Name: Privacy Settings
Version: 0.2.6 (compatible Firefox version 52.* to 56.*)
Author: Jeremy Schomery (j_schomery)
Licence: Mozilla Public Licence (MPL) 2.0
Source code: Github
Description: Alter Firefox’s built-in privacy settings easily with a toolbar panel.

PackagesStableFeature RequestVery LowLow[iceweasel-uxp] Request browser add-on: Classic Theme R...Unconfirmed
0%
Task Description

Name: Classic Theme Restorer
Version: 1.7.7.2 (compatible Firefox version 45.* to 56.*)
Author: Aris (Aris-t2)
Licence: Mozilla Public Licence (MPL) 2.0
Source code: Github
Description: Squared tabs, application menu, add-on bar, small button view and many more ‘old’ features for ‘Firefox 29-56’, not for Firefox 57+!

PackagesStableImplementation RequestVery LowLow[materia-theme] add packageUnconfirmed
0%
Task Description

A Material-like flat theme for GTK+ 2/3, and GNOME shell, released under a GNU General Public Licence (GNU GPL) 2 and later.

PackagesStableBug ReportVery LowLowGNOME cannot lock screen while using LightDMUnconfirmed
0%
Task Description

Description:
Screen locking does not work in GNOME, either with keyboard shortcuts or from the menu, while using LightDM.

Additional info:
* According to this thread[1] this bug has been patched in Ubuntu. Please consider applying this patch.[2]

Steps to reproduce:
# pacman -S gnome lightdm lightdm-gtk-greeter
# rc-update add lightdm default
Reboot, log in to a GNOME session and attempt to lock screen.

[1] https://www.reddit.com/r/gnome/comments/9klvej/is_there_a_way_to_get_the_screen_to_lock_with/ [2] https://git.launchpad.net/~ubuntu-desktop/ubuntu/+source/gnome-shell/tree/debian/patches/ubuntu/lightdm-user-switching.patch

PackagesStableBug ReportVery LowLowChemical uknown media typesResearching
50%
Task Description

I do not know how to solve this. Some of packages is causing this problem. I do not know which one.

Description:

(4/4) Updating the MIME type database...
Unknown media type in type ‘chemical/x-alchemy’ Unknown media type in type ‘chemical/x-cache’ Unknown media type in type ‘chemical/x-cactvs-ascii’ Unknown media type in type ‘chemical/x-cactvs-binary’ Unknown media type in type ‘chemical/x-cactvs-table’ Unknown media type in type ‘chemical/x-cdx’ Unknown media type in type ‘chemical/x-cdxml’ Unknown media type in type ‘chemical/x-chem3d’ Unknown media type in type ‘chemical/x-cif’ Unknown media type in type ‘chemical/x-cml’ Unknown media type in type ‘chemical/x-daylight-smiles’ Unknown media type in type ‘chemical/x-dmol’ Unknown media type in type ‘chemical/x-gamess-input’ Unknown media type in type ‘chemical/x-gamess-output’ Unknown media type in type ‘chemical/x-gaussian-input’ Unknown media type in type ‘chemical/x-gaussian-log’ Unknown media type in type ‘chemical/x-genbank’ Unknown media type in type ‘chemical/x-gulp’ Unknown media type in type ‘chemical/x-hin’ Unknown media type in type ‘chemical/x-inchi’ Unknown media type in type ‘chemical/x-inchi-xml’ Unknown media type in type ‘chemical/x-jcamp-dx’ Unknown media type in type ‘chemical/x-macromodel-input’ Unknown media type in type ‘chemical/x-mdl-molfile’ Unknown media type in type ‘chemical/x-mdl-rdfile’ Unknown media type in type ‘chemical/x-mdl-rxnfile’ Unknown media type in type ‘chemical/x-mdl-sdfile’ Unknown media type in type ‘chemical/x-mdl-tgf’ Unknown media type in type ‘chemical/x-mmcif’ Unknown media type in type ‘chemical/x-mol2’ Unknown media type in type ‘chemical/x-mopac-graph’ Unknown media type in type ‘chemical/x-mopac-input’ Unknown media type in type ‘chemical/x-mopac-out’ Unknown media type in type ‘chemical/x-msi-car’ Unknown media type in type ‘chemical/x-msi-hessian’ Unknown media type in type ‘chemical/x-msi-mdf’ Unknown media type in type ‘chemical/x-msi-msi’ Unknown media type in type ‘chemical/x-ncbi-asn1’ Unknown media type in type ‘chemical/x-ncbi-asn1-binary’ Unknown media type in type ‘chemical/x-ncbi-asn1-xml’ Unknown media type in type ‘chemical/x-pdb’ Unknown media type in type ‘chemical/x-shelx’ Unknown media type in type ‘chemical/x-vmd’ Unknown media type in type ‘chemical/x-xyz’ Unknown media type in type ‘all/all’ Unknown media type in type ‘all/allfiles’

PackagesStableImplementation RequestVery LowLow[xfe] Add Opus audio file type supportUnconfirmed
0%
Task Description

A format is not known or recognized in the original code base. To add a string into at the audio section in xferc.in:

opus = "<audioplayer>,<audioplayer>,audacity;Opus Audio;mp3_32x32.png;mp3_16x16.png;;"
PackagesStableBug ReportVery LowLow[autofs]: default configuration is /etc/auto.master ins...Unconfirmed
0%
Task Description

Description:

default configuration is /etc/auto.master instead of /etc/autofs/auto.master

admin→ sudo /usr/bin/automount -v -f -p /run/autofs.pid
Starting automounter version 5.1.2, master map /etc/auto.master
using kernel protocol version 5.02
lookup(file): file map /etc/auto.master missing or not readable
no mounts in table

PackagesStableImplementation RequestVery LowLow[codelite] Adding new packageUnconfirmed
0%
Task Description

The IDE codelite is an excellent development environment, continuously updated, has a clear vision and active support.
Would be nice to have this one within the repositories in upcoming releases, perhaps 0.5?

PackagesStableUpdate RequestVery LowLow[icewm] Upgrade package versionUnconfirmed
0%
Task Description

The current version of the package icewm within the Hyperbola-repositories is 1.3.8. The latest version is 1.6.3!
An update would be helpful as this window-manager follows absolutely the principles of the distribution Hyperbola itself, being simple and fast.

PackagesStableBug ReportVery LowLow[dhcpcd-ui] Adding icons from "Network-Manager Applet"Unconfirmed
0%
Task Description

When using the package for wireless connections no further icon is displayed without having the package [b]network-manager-applet[/b] installed.

ServicesMail Service IssueFeature RequestVery LowLowSupport RFC 3461: Delivery Status Notifications (DSNs)Unconfirmed
0%
Task Description

The RFC 3461 would allow Hyperbola email accounts to request the destination email providers to point out if an email was successfully delivered.

It might not cover all transport failures, but at least has a chance to know in advance whether the message was delivered, discarding the events that happen afterwards (be it to the main inbox or subject to filtering rules such as moving to other folder, marking as spam or deleted after receipt).

Software DevelopmentIceweasel-UXPImplementation RequestDeferLowSwiftweasel-UXP theme for Iceweasel-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftweasel was a Firefox-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since there are users encouraging us develop a Palemoon-based application , and Swiftweasel contains non-trademarked graphics and logos, we could port Swiftweasel to UXP platform as theme for Iceweasel-UXP.

Software DevelopmentIcedove-UXPImplementation RequestDeferLowSwiftdove-UXP theme for Icedove-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftdove was a Thunderbird-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since FossaMail may potentially be revived on UXP in the future [0] and Swiftdove contains non-trademarked graphics and logos, we could port Swiftdove to UXP platform as theme for Icedove-UXP.

ServicesHyperWeb IssueBug ReportVery LowLowRSS needs fixingUnconfirmed
0%
Task Description

Seems deleted items reappearing in the Hyperbola feeds since it gives its feed items empty ID string.

Software DevelopmentHyperToolsImplementation RequestLowLow[hypertools] create libretools replacement for Hyperbol...Deferred
0%
Task Description

Create hypertools to replace libretools package for HyperbolaBSD and GNU/Linux

It’s long period to develop this package.
For now, a systemd-nspawn wrapper is being developed for “libretools”[0]

[0]:https://issues.hyperbola.info/index.php?do=details&task_id=86

InstallationGeneralFeature RequestVery LowLow[calamares] add graphical installer with FDE supportResearching
0%
Task Description

Package Request: https://github.com/calamares/calamares

Original Bug Report:
— I would also like to test the beta isos when they are ready through qemu. If it looks good I plan to fully install them onto my laptop. My libreboot x200.

I don’t know if I should make a separate feature for this, but xfce is a good stable desktop environment for such a choice. that and lxde.

Though lxde is going to die...

InstallationGeneralImplementation RequestVery LowLowTo make installation instructions and get use of live I...Unconfirmed
0%
Task Description

I have installed multiple times Hyperbola, 4 times on 4 different notebooks.

What I have noticed is that the live ISO is quite huge in relation to the task that should be done. Namely. the live ISO shall at least contain some first packages, so that they do not need to be downloaded online.

Best would be if the live ISO can be copied straight and that system can run from ISO/DVD without having Internet. At least one simple graphical environment shall be included.

Further, I have noticed that there is only network instructions as HTML file.

I would rather call it installation-instructions.html to make it clear for people what it is. Or simply: INSTALL.html so that people understand what it is.

It says just network.html if I remember well.

Then there is absolutely no point or link or reference to the installation instructions.

Each time I got a network I had to go to either duckduckgo search engine or to hyperbola.info website and then I tried with lynx to find installation instructions.

It is not straight, not quite clearly in open, it is in Wiki, but that is quite hard to find.

We have to put ourselves in the shoes of those in need of free software. Millions of people need free software.

Many of us live in a developed western countries.

Yet millions of people in need of this software live in South America, Africa, Asia, Eastern Europe.

There are millions of students that could advance their study, and that could progress faster with free software.

In those countries Internet is often non-existent, universities may be located in poor network areas, Internet is being fetched by using mobile phones.

So if there is a live distribution, such shall at least contain basic software, which really can fit onto any DVD, and that as such can be copied on the computer without using Internet. Upgrades could be fetched by using Internet.

And there shall be clear reference, link or file about installation. There shall be no need to go to Internet to install the software.

InstallationGeneralFeature RequestVery LowLow[FAQ]Please note that not all RAR archives are supporte...Unconfirmed
0%
Task Description

I tried to extract a RAR v5 archive using unar that works fine when using the non-free unrar.

Here is the log (with the file name altered)

$ unar file.part1.rar
file.part1.rar: RAR 5

file.mp4  (-2144860915 B)... Failed! (Attempted to read more data than was available)

Extraction to current directory failed! (1 file failed.)

Please add in the FAQ that newer RAR archives (version 5) may not work when using unar.

ServicesGeneralFeature RequestVery LowLowhyperbola branding - add guidelines to packagesUnconfirmed
0%
Task Description

I could not find any regarding using arch or other branded themes. Parabola apparently rebrands some stuff in their libre repository, eg. they have their own parabola-themes-slim package for slim based themes.

https://issues.hyperbola.info/index.php?do=details&task_id=1213&opened=24&status[0]=

InstallationGeneralFreedom IssueVery LowLow[jwm] provides nonfree software support in the menu Unconfirmed
0%
Task Description

my recommended fix, make it reflect the applications that are actually installed on the system after removing non-free software support.

ServicesFlyspray IssueImplementation RequestVery LowLowSetting avatar picture on flyspry at issues.hyperbola.i...Unconfirmed
0%
Task Description

So avatar uploading is not working well, and picture is getting minimized to nothing.

ServicesFlyspray IssueSecurity IssueVery LowLowAfter account confirmation, crypt: No salt parameter wa...Unconfirmed
0%
Task Description

After confirming the newly created account (typing the confirmation code, the passwoard and its confirmation, and clicking the button to continue), the following error appears:

  Notice: crypt(): No salt parameter was specified. You must use a randomly generated salt and a strong hash function to produce a secure hash. in /srv/http/flyspray/includes/class.flyspray.php on line 656 

The account login seems to work normaly.

PackagesAnyReplace RequestLowLow[appmenu-qt4] replace with appmenu-qt (qt5)Deferred
0%
Task Description

“appmenu-qt4”[0][2] is a deprecated package (release in 2012)[1] and use qt4 unsupported/non-lts software[3], but “appmenu-qt5” not contains any release source code[2]

$ pacman -Si appmenu-qt4
Repository : community
Name : appmenu-qt4
Version : 0.2.6-1
Description : Export Qt4 applications menus over D-Bus
Architecture : x86_64
URL : https://launchpad.net/appmenu-qt Licenses : GPL Groups : None
Provides : None
Depends On : libdbusmenu-qt4
Optional Deps : None
Conflicts With : appmenu-qt
Replaces : appmenu-qt
Download Size : 16.55 KiB
Installed Size : 48.00 KiB
Packager : Antonio Rojas arojas@archlinux.org Build Date : Tue 28 Feb 2017 05:59:31 AM -03
Validated By : MD5 Sum SHA-256 Sum Signature

[0]:https://launchpad.net/appmenu-qt (qt4)
[1]:https://launchpad.net/appmenu-qt/+download [2]:https://launchpad.net/appmenu-qt5 [3]:https://en.wikipedia.org/wiki/Qt_5.6_LTS

PackagesAnyImplementation RequestVery LowLow[3proxy] add package since it's useful for tor on ftp p...Deferred
0%
Task Description

Add “3proxy”[0] package

Useful for tor on ftp proxy[1]

[0]:https://github.com/z3APA3A/3proxy [1]:https://trac.torproject.org/projects/tor/wiki/doc/TorifyHOWTO/FTP

PackagesAnyFeature RequestVery LowLow[i3lock-color] adding package into pacmanDeferred
0%
Task Description

We already have i3lock, this version is an enhanced version available in Arch AUR:
https://aur.archlinux.org/packages/i3lock-color https://aur.archlinux.org/packages/i3lock-color-git/

PackagesAnyImplementation RequestVery LowLow[plymouth] add packageDeferred
0%
Task Description

Plymouth is an application that runs very early in the boot process (even before the root filesystem is mounted!) that provides a graphical boot animation while the boot process happens in the background.

Please implement plymouth as an optional package.

PackagesAnyImplementation RequestVery LowLow[multipath-tools] add packageDeferred
0%
Task Description

Hello,

Could it be possible to add this package :

multipath-tools

“Multipath tools for Linux (including kpartx)”

License : GPL2

to the repo ?

Thank you

PackagesAnyImplementation RequestVery LowLow[thinkfan] add packageDeferred
0%
Task Description

Could it be possible to add this package :

thinkfan

“A minimalist fan control program. Supports the sysfs hwmon interface and thinkpad_acpi”

License : GPL

to the repo ?

Thanks

PackagesAnyImplementation RequestLowLow[nut] add Network UPS Tools 2.7.x packageAssigned
0%
Task Description

Add “nut” package.

Useful for uninterruptible power supplies, power distribution units, solar controllers and servers power supply units.

PackagesAnyImplementation RequestLowLow[codecrypt] add new packageUnconfirmed
0%
Task Description

This is a GnuPG-like unix program for encryption and signing that uses only quantum-computer-resistant algorithms:

  McEliece cryptosystem (compact QC-MDPC variant) for encryption
  Hash-based Merkle tree algorithm (FMTSeq variant) for digital signatures

Codecrypt is free software. The code is licensed under terms of LGPL3 in a good hope that it will make combinations with other tools easier.

PackagesAnyImplementation RequestVery LowLow[fsearch] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

fsearch

https://github.com/cboxdoerfer/fsearch

License : GPL

PackagesAnyImplementation RequestVery LowLow[flowblade] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

flowblade

https://www.parabola.nu/packages/pcr/any/flowblade/

“a multitrack non-linear video editor for GNU/Linux”

License : GPL3

Thanks

PackagesAnyImplementation RequestVery LowLow[whipper] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

whipper

“A Unix CD ripper aiming for accuracy over speed – forked from morituri”

https://www.parabola.nu/packages/community/any/whipper/ https://github.com/JoeLametta/whipper

License : GPL3

Thanks

PackagesAnyImplementation RequestVery LowLow[sacd-extract] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

sacd-extract

“Extract DSD files from an SACD image”

https://www.parabola.nu/packages/pcr/x86_64/sacd-extract/ https://sourceforge.net/p/sacd-ripper/

License : GPL2

Thanks

PackagesAnyImplementation RequestVery LowLow[radiotray] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add :

radiotray

“An online radio streaming player that runs on a Linux system tray.”

https://aur.archlinux.org/packages/radiotray/

License : GPL

Thanks

PackagesAnyFeature RequestVery LowLow[nextcloud-client] add packageUnconfirmed
0%
Task Description

I use Nextcloud for syncing, although, I would normally not ask for this, due to Nextcloud’s appimage being available, but for some reason the latest version doesn’t work on hyperbola. So... yeah.

Usually Nextcloud’s appimage works regardless of what packages you have, so I guess in essence... add Nextcloud-client package to this system is my request.

PackagesAnyImplementation RequestVery LowLow[ttf-font-awesome] add ttf-font-awesome fontUnconfirmed
0%
Task Description

Could it be possible to add :

ttf-font-awesome

to the repo ?

https://www.parabola.nu/packages/community/any/ttf-font-awesome/ http://fontawesome.io/

Thanks

PackagesAnyImplementation RequestVery LowLow[awesome-terminal-fonts] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

awesome-terminal-fonts

to the repo please ?

https://www.parabola.nu/packages/community/any/awesome-terminal-fonts/ https://github.com/gabrielelana/awesome-terminal-fonts

Thanks

PackagesAnyImplementation RequestVery LowLow[w_scan] add package Unconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

w_scan

“Universal ATSC and DVB blind scanner”

https://aur.archlinux.org/packages/w_scan/

License : GPL

Thanks

Showing tasks 1 - 50 of 492 Page 1 of 101 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing