All Projects

ProjectCategoryTask TypePrioritySeveritySummary  ascStatusProgress
Software DevelopmentGeneralImplementation RequestVery HighCriticalARM (aarch and armv7h) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and ARM A7/A53 promises to be a great architecture example for low-power computers, laptops and embedded systems.

NOTE: ARM porting is focused only for HyperbolaBSD .

PackagesAnyFeature RequestVery LowMediumAdd Draco DesktopUnconfirmed
0%
Task Description

https://github.com/rodlie/draco

its like Lumina Desktop, but its more lightweight and better for Gnu/Linux

:)

Matter of fact, I hope its okay, but the latest stable build, of Draco is vastly better than Lumina. And for this reason I wanted to know if you could put higher priority on this than the Lumina Desktop request.

ServicesFlyspray BrandingImplementation RequestMediumMediumAdd Hyperbola branding to HyperTaskIn Progress
40%
Task Description

Add Hyperbola branding to HyperTask such as HyperWiki and HyperForum for prolixity reasons.

PackagesAnyImplementation RequestVery LowHighAdd MPTCP (MultiPath TCP) to HyperbolaUnconfirmed
0%
Task Description

https://aur.archlinux.org/packages/linux-mptcp/

Kernel Patch for 4.9 :
http://multipath-tcp.org/patches/mptcp-v4.9-c88d1d56809e.patch

Compile :
https://multipath-tcp.org/pmwiki.php/Users/DoItYourself

PackagesAnyFeature RequestVery LowMediumAdd Trinity DesktopUnconfirmed
0%
Task Description

I would like this, because, it looks even better than xfce4. It does use an older qt3 though, BUT, they are maintaining QT3 and improving it themselves.

Plus, its more lightweight than xfce4 and maybe even lxqt too without looking like crap like lxqt and yet still is better than a WM.

I know you don’t like stuff that is abandonware in any sense, but given its being maintained, I hope you will add it.

But let me know.

ServicesWiki Page IssueImplementation RequestVery LowMediumAdd notification/subscription capabilities when a page ...Unconfirmed
0%
Task Description

After talking to Emulatorman, we think this would be a nice feature to add to our Hyperwiki to be able to subscribe to the original page in English to help tracking changing to the translated pages.
This implies to add the email notifications to the dokuwiki system

ServicesFlyspray IssueSecurity IssueVery LowLowAfter account confirmation, crypt: No salt parameter wa...Unconfirmed
0%
Task Description

After confirming the newly created account (typing the confirmation code, the passwoard and its confirmation, and clicking the button to continue), the following error appears:

  Notice: crypt(): No salt parameter was specified. You must use a randomly generated salt and a strong hash function to produce a secure hash. in /srv/http/flyspray/includes/class.flyspray.php on line 656 

The account login seems to work normaly.

PackagesAnyFreedom IssueVery LowLowCan 123.hp.com/setup help me to fix HP Printer error co...Unconfirmed
0%
Task Description

You will see this code on the control panel of the printer while you are trying to scan. It might show up when you try to scan some heavy book or documents. There is no need to worry as you can fix it easily by following these simple steps from 123.hp.com/setup:

  • Turn on the printer and wait till it is in an idle state
  • Remove the printer from the power supply and wait for a minute or so
  • Plug the cables back and reconnect the power cord utility to the back part of the printer and switch it on
  • Let it pass through the warm up stage and wait till the light on the printer blinks. This will fix the issue and try putting one sheet at a time in the scanner

If you still face any issue then just visit 123.hp.com/setup and get help instantly from the experts.

Software DevelopmentIcedove-UXPBug ReportVery LowMediumCardBook addon make icedove crash wen adding or editing...Unconfirmed
0%
Task Description

the cardbook version is 30.9 i tried with vcard 4.0 and vcard 3.0 same issue editing or creating a contact makes
icedove-uxp crash!

PackagesAnyBug ReportVery LowHighDesite "noauto" specified in /etc/fstab all devices get...Unconfirmed
0%
Task Description

Description:

I have tried all combinations, but despite “noauto” specified in /etc/fstab all devices get mounted at boot.

Who can help me, not to mount a device during boot?

Software DevelopmentHyperBKImplementation RequestVery HighCriticalDevelop a BSD descendant kernel for HyperbolaBSDIn Progress
30%
Task Description

Develop HyperBK (Hyper Berkeley Kernel), a BSD descendant kernel with GPL-compatible licenses preserved, non-compatible ones removed, and new code written under GPL-3 for HyperbolaBSD.

TODO:

  • Download OpenBSD kernel source code from OpenBSD siteDONE
  • Download LibertyBSD scripts to deblob and rebrand kernel from their scripts. → DONE
  • Push source to HyperBK’s project. → DONE
  • Rebrand OpenBSD kernel to HyperbolaBSD with LibertyBSD scripts. → DONE
  • Rebrand entire code (functions, variable, pointers, etc) under HyperbolaBSD → DONE
  • Remove files under non GPL-compatible licenses → DONE
  • Import code from another BSD systems under GPL-compatible licenses → IN PROGRESS
  • Write new code under GPL-3 → IN PROGRESS
  • Package HyperBK for HyperbolaBSD.

PATCHING NOTE

When the check concerns kernel, we obviously want to match with HyperbolaBSD.

Example of triplet check:	hyperbolabsd)
Example of uname -s check:	HyperbolaBSD)
Example of uname -r check:	0.1)
Example of C macro check:	defined(__HyperbolaBSD__)
PackagesAnySecurity IssueVery LowMediumDownload debian-fixes instead of relying on external so...Unconfirmed
0%
Task Description

It happened already with minetest and again with prosody: When trying to build own packages with makepkg there are patches downloaded from the Debian-project. But the given HTTP(S)-sources are no longer available, concrete example within prosody to be found: https://deb.debian.org/debian/pool/main/p/prosody/prosody_0.10.2-1~bpo9+1.debian.tar.xz (not available)

Please don’t rely on those external sources when creating PKGBUILD-files or just give users the possibility for a secure and granted download. Therefore I cannot build prosody on my own now!

PackagesAnyFeature RequestVery LowVery LowDreamchess package wantedUnconfirmed
0%
Task Description

this package is under gpl3. It is the most reasonable chess game because it can be easy or hard depending on your preference.

PackagesAnyFreedom IssueVery LowLowEnigmail for IceapeUnconfirmed
0%
Task Description

this would be appreciated greatly, although I am in no hurry.

PackagesAnyFreedom IssueVery LowLowFix Your Epson Printer Offline TroubleshootingUnconfirmed
0%
Task Description

Epson printer offline is the most common issue users might face. This error basically occurs due to low network, USB cable not connected properly, etc. I am a technician and have received this complaint from various customers. However, I have been tackling such issues from the past many years. This [https://www.epsonprintersupportnumber.com/blog/how-to-bring-an-offline-epson-printer-online | Epson printer offline problem]] can easily be solved with a few steps. In case, you are also facing this error then you can get in touch with me. Your issue can be resolved instantly. I have high experience in the technical field and have been sorting out the issues of printer customers on a daily basis. If you want the instant fixing solution you can anytime connect with me and convey your printer issue. There is no restricted time and you can contact me anytime, 24*7. All you need to do is share the correct details of your printer model. You will instantly receive the fixing solution.

ServicesPunBB BrandingBug ReportHighHighForum appearance bugsIn Progress
100%
Task Description

Some forum display errors:

  1. preview button with the orange border.
  1. Error message when logging in gray color making it difficult to read
PackagesStableFreedom IssueVery LowHighGNU Privacy Assistant (GPA)Unconfirmed
0%
Task Description

Hello Hyperbola!

GPA gives out the following errors upon opening the app.

First:

```
The GPGME library returned an unexpected
error at confdialog.c:1459. The error was:

    Unsupported protocol

This is either an installation problem or a bug in GPA.
GPA will now try to recover from this error.
```

Second:

```
Fatal Error in GPGME library
(invoked from file options.c, line 302):

    Unsupported protocol

The application will be terminated

What can I do to overcome these errors?
```
As this issue makes gpa app completely unusable, I have set this bug report’s severity as high.

I also request the admin to set priority to high due to it’s severity.

Thank you!

Regards,
RG.

PackagesAnyBackport RequestVery LowMediumGreasemonkey For IceapeUnconfirmed
0%
Task Description

greasemonkey-3.31.4 version desired. I would love to see it implemented for Iceape

PackagesAnyBackport RequestVery LowVery LowIcetray for Iceape-uxpAssigned
0%
Task Description

This already works for it, but I just thought I would request it to be put in.

ServicesHyperWiki/DokuWikiImplementation RequestMediumMediumLibreboot hardening grub guideUnconfirmed
0%
Task Description

I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,

https://libreboot.org/docs/gnulinux/grub_hardening.html

I wondered if there is anything different that needs to be done to get this part done:

gpg –homedir keys –detach-sign my.initramfs
gpg –homedir keys –detach-sign my.kernel
gpg –homedir keys –detach-sign libreboot_grub.cfg
gpg –homedir keys –detach-sign my.grubtest.cfg

it gives me a bunch of weird errors

PackagesAnyUpdate RequestMediumHighMake Knock patch for Linux-libre 4.14 LTSUnconfirmed
0%
Task Description

The Knock patches for linux-libre maintained by you at https://git.hyperbola.info:50100/kernels/knock.git/ have support up to linux-libre 4.13 only (and I think it didn’t work for it when I tried it, compilation failed) but from all of those supported versions, the newest maintained generation by the upstream is 4.9.x

However, since newer kernel generations might require reprogramming the patch, I want to request it only for the latest LTS generation which is 4.14. As you know, LTS software are supported for a long time, so it’s worth to make it for linux-libre 4.14.x

This might not be really important for Hyperbola in the short term, but you are the maintainers of the TCP Stealth implementation for Linux-libre and I and maybe other people would like to use it in their projects for newer versions.

Plus, it would be great since while 4.9 kernels can use the GRSec+Knock combination like linux-libre-lts-unofficial-grsec-knock, with support for 4.14 anyone would be able to use a combination of newer patches such as Linux-hardened+Knock (Linux-hardened supports 4.14 and 4.15 as of now) which is what I’d like to do.
https://github.com/copperhead/linux-hardened/releases

PackagesAnyBackport RequestVery LowMediumNo Resource Url Leak for IceapeUnconfirmed
0%
Task Description

1.2.4 version would be nice for Iceape.

PackagesStableBug ReportVery LowMediumPCManFM display different behaviorUnconfirmed
0%
Task Description

Description:

The problem is pcmanfm is not showing any partitions on the left side. It only show Home Folder, Desktop, Applications, Filesystem and the ext. hdd. If I include dbus-launch pcmanfm -d command, it show the other partitions on the left side of window but not ext. hdd. The drive/partitions are not encrypted.
I do have dbus, gvfs & ntfs-3g installed and active services.

Additional info:
* package version(s)
PCManFM 1.2.5 - using LibFM ver. 1.2.5

Steps to reproduce:
Original install from the livecd with LXDE but I may run Openbox standalone and get the same behavior with either environment. I do not have this issue running other distros.

Software DevelopmentGeneralImplementation RequestVery HighCriticalPOWER (ppc64le) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and the Power9-based Talos II promises to be a great architecture example for workstations and servers environments where Hyperbola is focused since is a fully free long-term support distribution.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the POWER architecture (power64le).

NOTE: POWER porting is focused only for Hyperbola GNU/Linux-libre .

PackagesStableReplace RequestVery LowMediumPackage ossp has got systemd dependenciesUnconfirmed
0%
Task Description

Description: Concurrent package ossp in version 1.3.2-15 has got dependencies to systemd, which is contradicting the whole distribution and the used INIT-system. Therefore my request to port this to OpenRC!

Additional info:
* package version(s) 1.3.2-15

PackagesAnyImplementation RequestVery LowMediumPrivacy Settings for IceapeUnconfirmed
0%
Task Description

This addon works for any firefox based browser but not seamonkey based or this.

I wondered if you could implement the iceweasel one for Iceape.

PackagesAnyFeature RequestVery LowMediumQemu-kvm package requestUnconfirmed
0%
Task Description

1:2.8 or later, qemu-kvm

This would make qemu so much easier and faster, please support this package.

Software DevelopmentGeneralImplementation RequestDeferCriticalRISC-V (riscv64) porting + multilib supportDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and RISC-V promises to be a great architecture example for low-power computers, laptops and embedded systems, also as ARM architecture replacement.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the RISC-V architecture (riscv64) with multilib support.

NOTE: RISC-V porting is focused only for Hyperbola GNU/Linux-libre .

ServicesHyperWeb IssueBug ReportVery LowLowRSS needs fixingUnconfirmed
0%
Task Description

Seems deleted items reappearing in the Hyperbola feeds since it gives its feed items empty ID string.

PackagesAnyBackport RequestVery LowMediumRandom Agent Spoofer for IceapeUnconfirmed
0%
Task Description

random_agent_spoofer-0.9.5.8.4-fx.xpi is the version I desire, can you implement it?

Software DevelopmentIceweasel-UXPBackport RequestVery LowVery LowRequest browser add-on: FireGesturesUnconfirmed
0%
Task Description

Name: FireGestures
Version: 1.11.1 (compatible Firefox version 52)
Source code: Github
Description: A customizable mouse gestures extension which enables to execute various commands and user scripts with six types of gestures.

https://github.com/gomita/firegestures/

https://addons.mozilla.org/en-US/firefox/addon/firegestures/

Software DevelopmentIceweasel-UXPBackport RequestVery LowMediumRequest browser add-on: New Tab ToolsUnconfirmed
0%
Task Description

Name: New Tab Tools
Version: 81 (compatible Firefox version 52)
Source code: Github
Description: Customize Firefox’s. Tabs Page

https://github.com/darktrojan/newtabtools

https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/

Software DevelopmentGeneralBug ReportHighCriticalRunit errors,Unconfirmed
0%
Task Description

/sbin/openrc-run: bad interpreter: No such file or directory

I get this error whenever I try to start dhcpcd with sv /etc/runit/

And for sndiod I get this doing the same guide,

warning: sndiod: unable to open supervise/ok: file does not exist

Although rather ironically, If I type sndiod or dhcpcd into root, it works just fine.

Maybe its an FHS issue or possibly, I am screwing up? I am not sure. Feedback is welcome.

This is what I did:

=⇒ Add a service:

ln -s /etc/sv/<service> /var/service
==> Start/stop/restart a service:
sv <start/stop/restart> <service>

more or less, I used this guide.

PackagesAnyImplementation RequestMediumLowScid vs. PC – PGN Reader/ChessBaseUnconfirmed
0%
Task Description

http://scidvspc.sourceforge.net/

PackagesAnyBackport RequestVery LowLowSelf Destructing Cookies for IceapeUnconfirmed
0%
Task Description

I would like this to be available for Iceape as well V4.13

ServicesFlyspray IssueImplementation RequestVery LowLowSetting avatar picture on flyspry at issues.hyperbola.i...Unconfirmed
0%
Task Description

So avatar uploading is not working well, and picture is getting minimized to nothing.

PackagesAnyFreedom IssueVery LowLowSsleuth for IceapeUnconfirmed
0%
Task Description

5.4 version desired, it would be nice to still see the ciphers in Iceape.

PackagesAnyImplementation RequestMediumLowStockfish Chess EngineUnconfirmed
0%
Task Description

«Unlike most chess engines, Stockfish is open source (GPL license). That means you can read the code, modify it, contribute back, and even use it in your own projects.» I do not know if it is libre. If it is, together with Scid, Hyperbola is one step closer for every chess lover out there who also loves freedom!
https://stockfishchess.org/

ServicesMail Service IssueFeature RequestVery LowLowSupport RFC 3461: Delivery Status Notifications (DSNs)Unconfirmed
0%
Task Description

The RFC 3461 would allow Hyperbola email accounts to request the destination email providers to point out if an email was successfully delivered.

It might not cover all transport failures, but at least has a chance to know in advance whether the message was delivered, discarding the events that happen afterwards (be it to the main inbox or subject to filtering rules such as moving to other folder, marking as spam or deleted after receipt).

PackagesAnyImplementation RequestVery LowMediumSupport of MPTCP (Multipath TCP) on HyperbolaUnconfirmed
0%
Task Description

Patch for 4.9 : https://multipath-tcp.org/patches/mptcp-v4.9-c88d1d56809e.patch

AUR : https://aur.archlinux.org/packages/linux-mptcp/

Software DevelopmentIcedove-UXPImplementation RequestDeferLowSwiftdove-UXP theme for Icedove-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftdove was a Thunderbird-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since FossaMail may potentially be revived on UXP in the future [0] and Swiftdove contains non-trademarked graphics and logos, we could port Swiftdove to UXP platform as theme for Icedove-UXP.

Software DevelopmentIceweasel-UXPImplementation RequestDeferLowSwiftweasel-UXP theme for Iceweasel-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftweasel was a Firefox-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since there are users encouraging us develop a Palemoon-based application , and Swiftweasel contains non-trademarked graphics and logos, we could port Swiftweasel to UXP platform as theme for Iceweasel-UXP.

PackagesAnyFreedom IssueVery LowHighSynergy en teclado en español no tiene tildes ni ñUnconfirmed
0%
Task Description

Description:
Share a single mouse and keyboard between multiple computers, with libressl and OpenRC support

Issue:
Synergy no es capas de trasmitir tildes ni eñes y demás caracteres del español españa

Additional info:
* package version(s): community/synergy 1.8.8-2.hyperbola1
* config and/or log files etc.

Steps to reproduce:
instalarar synergy en 2 PCs con hyperbola 0.3, he intentar escribir tildes, no funcionará...

ServicesHyperWebBug ReportVery LowMediumThe Mailling list don't workUnconfirmed
0%
Task Description

The Mailling list don't work : https://lists.hyperbola.info//mailman/listinfo/

InstallationGeneralImplementation RequestVery LowLowTo make installation instructions and get use of live I...Unconfirmed
0%
Task Description

I have installed multiple times Hyperbola, 4 times on 4 different notebooks.

What I have noticed is that the live ISO is quite huge in relation to the task that should be done. Namely. the live ISO shall at least contain some first packages, so that they do not need to be downloaded online.

Best would be if the live ISO can be copied straight and that system can run from ISO/DVD without having Internet. At least one simple graphical environment shall be included.

Further, I have noticed that there is only network instructions as HTML file.

I would rather call it installation-instructions.html to make it clear for people what it is. Or simply: INSTALL.html so that people understand what it is.

It says just network.html if I remember well.

Then there is absolutely no point or link or reference to the installation instructions.

Each time I got a network I had to go to either duckduckgo search engine or to hyperbola.info website and then I tried with lynx to find installation instructions.

It is not straight, not quite clearly in open, it is in Wiki, but that is quite hard to find.

We have to put ourselves in the shoes of those in need of free software. Millions of people need free software.

Many of us live in a developed western countries.

Yet millions of people in need of this software live in South America, Africa, Asia, Eastern Europe.

There are millions of students that could advance their study, and that could progress faster with free software.

In those countries Internet is often non-existent, universities may be located in poor network areas, Internet is being fetched by using mobile phones.

So if there is a live distribution, such shall at least contain basic software, which really can fit onto any DVD, and that as such can be copied on the computer without using Internet. Upgrades could be fetched by using Internet.

And there shall be clear reference, link or file about installation. There shall be no need to go to Internet to install the software.

PackagesAnyBackport RequestVery LowLowUblock Origin for IceapeIn Progress
90%
Task Description

The version I desire is this: 1.16.4.6

ServicesGeneralFreedom IssueVery LowLowWhy is my Epson printer offline?Unconfirmed
0%
Task Description

Do you ask yourself ‘why is my Epson printer offline’ even when it is turned on? If yes then you are in the right place as we are here to provide you a solution that will fix this issue.
If your printer is linked with an Ethernet cable then ensure that the cable is attached to the router and the printer in a proper manner. If you require an IP address then you can print a network configuration page.
If you are using a USB cable then you should check if it is loose or not. If you think that there is a problem with the USB cable then you can also connect it directly as an alternative to using a hub.
If it is a wireless connection then use the network configuration page to get the IP address and ensure that the printer and the system are both connected to one wifi connection.
https://www.printersupportpro.us/epson-printer-offline

PackagesAnyBug ReportVery LowLowXenocara xbacklight bugUnconfirmed
0%
Task Description

When i try to set the brightness on my screen, with xbacklight -set 100,

it does this:

No outputs have backlight property

and it doesn’t really matter if I set it lower than 100 or what it currently is at.

Fix when you can please!

PackagesAnyImplementation RequestVery LowLow[3proxy] add package since it's useful for tor on ftp p...Deferred
0%
Task Description

Add “3proxy”[0] package

Useful for tor on ftp proxy[1]

[0]:https://github.com/z3APA3A/3proxy [1]:https://trac.torproject.org/projects/tor/wiki/doc/TorifyHOWTO/FTP

PackagesAnyFeature RequestMediumMedium[DCPT500W] possible integration of drivers to cups on P...Assigned
0%
Task Description

Hi guys, I have ever run into a Brother brand printer model DCPT500W[0], and I have seen that the source code for the drivers under GPLv3 license is available.

I also see that there is a file brother_dcpt500w_printer_en.ppd, which is important for cups, which is why it may be necessary to integrate it into the cups, as long as the drivers are Libre.

[0]:https://download.brother.com/welcome/dlf101963/dcpt500w_cupswrapper_GPL_source_3.0.2-0.tar.gz

Showing tasks 1 - 50 of 406 Page 1 of 91 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing