All Projects

ProjectCategoryTask TypePriority  descSeveritySummaryStatusProgress
PackagesAnySecurity IssueVery LowCritical[dokuwiki] CVEsUnconfirmed
0%
Task Description

Our current dokuwiki 20170219_b-1 has two serious CVE.

Error message attached after the first installation

PackagesAnySecurity IssueVery LowCritical[tcpreplay] CVEsUnconfirmed
0%
Task Description

A huge number of CVEs have been fixed on 4.3.1 :

CVE-2018-20552
CVE-2018-20553
CVE-2018-18408
CVE-2018-18407
CVE-2018-17974
CVE-2018-17580
CVE-2018-17582
CVE-2018-13112

Current Hyperbola version is 4.2.6

PackagesStableBug ReportVery LowCritical [kodi] "The Movie Database" scraper doesn't workUnconfirmed
0%
Task Description

With kodi 17.1-2.hyperbola1 “The Movie Database” scraper doesn’t work. The error message is :

"Unable to connect to remote server"
PackagesAnyBug ReportVery LowCritical[notmuch-mutt] missing requirementUnconfirmed
0%
Task Description

Description:
notmuch-mutt fails to compile without perl-mail-message which is missing in Hyperbola

Steps to reproduce:
Install notmuch-mutt and try `notmuch-mutt` at the command line. Then install `perl-mail-message` from Arch and try again.

PackagesAnyBug ReportVery LowHighDesite "noauto" specified in /etc/fstab all devices get...Unconfirmed
0%
Task Description

Description:

I have tried all combinations, but despite “noauto” specified in /etc/fstab all devices get mounted at boot.

Who can help me, not to mount a device during boot?

PackagesAnyImplementation RequestVery LowHigh[glom]: should depend on libgdaUnconfirmed
0%
Task Description

Description:

glom cannot run without libgda, so it should depend on libgda package

PackagesStableBug ReportVery LowHigh[lm_sensors] Fail to load it87 module at bootUnconfirmed
0%
Task Description

Description:

I ran sensors-detect, it detected two modules :

coretemp
it87

Those have been added to /etc/sysconfig/lm_sensors :

# This file is sourced by /etc/init.d/lm_sensors and defines the modules to
# be loaded/unloaded.
#
# The format of this file is a shell script that simply defines variables:
# HWMON_MODULES for hardware monitoring driver modules, and optionally
# BUS_MODULES for any required bus driver module (for example for I2C or SPI).

HWMON_MODULES="coretemp it87"

But only coretemp is loaded at boot.

I can manually load it87 module (modprobe it87) and get all sensors working but for some reason it87 module is not loaded at boot.

PackagesStableBug ReportVery LowHighjava cacerts file is emptyUnconfirmed
0%
Task Description

/etc/ssl/certs/java/cacerts has 0 entries, resulting in ssl handshake errors in java applications.

Package versions:
* ca-certificates 20170307-1
* ca-certificates-utils 20170307-1

ServicesWiki Page IssueBug ReportVery LowHighHTML design on Wiki not readableUnconfirmed
0%
Task Description

The wiki pages look really too narrow and not readable on even half a screen of the laptop.

PackagesAnyUpdate RequestVery LowHighufw update/ufw bugUnconfirmed
0%
Task Description

There appears to be a bug with the current version of ufw, 0.35-2

Dunno if updating it would fix it, but it is kind of annoying and possibly security issue.

it says ufw is inactive when I reboot despite it being installed in the runlevel.

PackagesAnyImplementation RequestVery LowHigh[epson-inkjet-printer-escpr] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add :

epson-inkjet-printer-escpr

“Epson Inkjet Printer Driver (ESC/P-R) for Linux”

License : GPL2

https://aur.archlinux.org/packages/epson-inkjet-printer-escpr/ https://packages.debian.org/stretch/printer-driver-escpr

In my case, it was needed to use an Epson printer & scanner.

PackagesAnyUpdate RequestVery LowHigh[proj]: please update to latest versionUnconfirmed
0%
Task Description

Description:

https://proj4.org/index.html

This package have valuable geodetic applications, and I intend to present Hyperbola GNU/Linux-libre soon in universities and schools in East Africa.

The coordinate system there is not WGS84 and this package only in new version is providing the conversion from East African geographic coordinates to WGS84, and will be very usable in many industrial and private applications.

PackagesAnyBug ReportVery LowHigh[iceweasel-uxp] windows don't render correctly in add-o...Researching
0%
Task Description

I can’t switch windows in add-ons such as session manager.

It’s probably the same bug which appears in palemoon (inherited from UXP). See here:

https://issues.hyperbola.info/index.php?do=details&task_id=1160&opened=24&status[0]=

https://forum.palemoon.org/viewtopic.php?f=37&t=19941&sid=3cd95f0870b5cef74c582eb9a3ea778a

PackagesAnyBug ReportVery LowHigh[kdelibs4support] XDG_RUNTIME_DIR not setUnconfirmed
0%
Task Description

Description:

This bug only appears when logged in as root on terminal

# kf5-config --version
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
Qt: 5.8.0
KDE Frameworks: 5.33.0
kf5-config: 1.0

Additional info:

* package version(s)

$ pacman -Si kdelibs4support
Repositorio               : extra
Nombre                    : kdelibs4support
Versión                   : 5.33.0-1
Descripción               : Porting aid from KDELibs4
Arquitectura              : x86_64
URL                       : https://community.kde.org/Frameworks
Licencias                 : LGPL
Grupos                    : kf5-aids
Provee                    : Nada
Depende de                : kunitconversion  kitemmodels  kemoticons  kded  kparts
Dependencias opcionales   : Nada
En conflicto con          : kde4support
Remplaza a                : kde4support
Tamaño de la descarga     : 3,03 MiB
Tamaño de la instalación  : 17,36 MiB
Encargado                 : Felix Yan <felixonmars@archlinux.org>
Fecha de creación         : jue 13 abr 2017 14:29:47 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

Steps to reproduce:

- Install KDE plasma

PackagesAnyBug ReportVery LowHigh[blueman] org.freedesktop.DBus.Error.NameHasNoOwnerUnconfirmed
0%
Task Description

Description:

org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name ‘org.bluez.obex’: no such name

Additional info:
* package version(s)

$ pacman -Si blueman
Repositorio               : community
Nombre                    : blueman
Versión                   : 2.0.4-3
Descripción               : GTK+ Bluetooth Manager
Arquitectura              : x86_64
URL                       : https://github.com/blueman-project/blueman
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : bluez  bluez-libs  gtk3  libnotify  python-cairo  python-dbus
                            python-gobject
Dependencias opcionales   : dnsmasq: Network Access Point (NAP) support
                            networkmanager: Dial Up Networking (DUN) and Personal Area
                            Networking (PAN) support
                            pulseaudio-bluetooth: audio devices support
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1814,18 KiB
Tamaño de la instalación  : 5345,00 KiB
Encargado                 : Felix Yan <felixonmars@archlinux.org>
Fecha de creación         : dom 25 dic 2016 12:00:42 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

(blueman-applet | ccze -A):
- https://paste.debian.net/plain/1049476

(pkgfile -l blueman):
- https://paste.debian.net/plain/1049477

Steps to reproduce:

- Install blueman

PackagesAnyBug ReportVery LowHigherror: extract: not overwriting dir with file /usr/loca...Unconfirmed
0%
Task Description

Description:

after upgrade there are errors that shall not be there. I cannot know why.

admin-> upgrade-hyperbola
:: Synchronizing package databases...
 core                             186.6 KiB   283K/s 00:01 [###############################] 100%
 extra                           1918.8 KiB   259K/s 00:07 [###############################] 100%
 community                          4.1 MiB   217K/s 00:19 [###############################] 100%
 DEB_Arch_Extra                     4.2 KiB  0.00B/s 00:00 [###############################] 100%
 DEB_Arch_Extra.sig               280.0   B  0.00B/s 00:00 [###############################] 100%
:: Starting full system upgrade...
warning: elinks: local (0.13-18) is newer than community (0.12pre6-1.hyperbola1)
resolving dependencies...
looking for conflicting packages...

Packages (5) filesystem-2017.03-2.hyperbola10.4  icedove-uxp-52.9.20181107-1
             iceweasel-uxp-52.9.20181107-1  licenses-20140629-2.hyperbola3
             pacman-mirrorlist-20181031-1.hyperbola1.1

Total Download Size:    79.91 MiB
Total Installed Size:  226.65 MiB
Net Upgrade Size:        0.26 MiB

:: Proceed with installation? [Y/n]
:: Retrieving packages...
 filesystem-2017.03-2.hyperb...    13.0 KiB  0.00B/s 00:00 [###############################] 100%
 licenses-20140629-2.hyperbo...    68.4 KiB   171K/s 00:00 [###############################] 100%
 pacman-mirrorlist-20181031-...     5.6 KiB  0.00B/s 00:00 [###############################] 100%
 icedove-uxp-52.9.20181107-1...    37.6 MiB   403K/s 00:06 [############################---]  93     icedove-uxp-52.9.20181107-1...    37.9 MiB   41-----------------------------]      iceweasel-uxp-52.9.20181107...     3.8 MiB   867K/s 00:42 [##-----------------------------]       iceweasel-uxp-52.9.20181107...     3.8 MiB   600K/s 01:01 [##-----------------------------      iceweasel-uxp-52.9.20181107...     4.0 MiB   773K/s 00:47 [###----------------------------]    iceweasel-uxp-52.9.20181107...     4.1 MiB   702K/s 00:51 [###----------------------------]   iceweasel-uxp-52.9.20181107...    39.8 MiB   212K/s 03:12 [###############################] 100%
(5/5) checking keys in keyring                             [###############################] 100%
(5/5) checking package integrity                           [###############################] 100%
(5/5) loading package files                                [###############################] 100%
(5/5) checking for file conflicts                          [###############################] 100%
(5/5) checking available disk space                        [###############################] 100%
:: Processing package changes...
(1/5) upgrading filesystem                                 [###############################] 100%
error: extract: not overwriting dir with file /usr/local/share/man
error: problem occurred while upgrading filesystem
error: could not commit transaction
error: failed to commit transaction (transaction aborted)
Errors occurred, no packages were upgraded.
PackagesStableBug ReportVery LowHigh[devede] xorriso unsupported option '-dvd-video'Assigned
0%
Task Description

Description:

Devede fails to convert transcoded videos to iso format with libburn-1.5.0.

Drive current: -outdev 'stdio:/home/heckyel/movie/movie.iso'
Media current: stdio file, overwriteable
Media status : is blank
Media summary: 0 sessions, 0 data blocks, 0 data,  334g free
xorriso : FAILURE : -as genisofs: Unsupported option '-dvd-video'
xorriso : NOTE : -return_with SORRY 32 triggered by problem severity FAI

Additional info:

$ pacman -Si devede
Repositorio               : community
Nombre                    : devede
Versión                   : 4.8.8-1
Descripción               : A program to create VideoDVDs and CDs
Arquitectura              : any
URL                       : http://www.rastersoft.com/programas/devede.html
Licencias                 : GPL3
Grupos                    : Nada
Provee                    : Nada
Depende de                : mencoder  ffmpeg  dvdauthor  vcdimager  cdrkit  ttf-dejavu
                            gtk3  python-cairo  python-gobject  python-setuptools
Dependencias opcionales   : mplayer
                            vlc
                            mpv
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1640,88 KiB
Tamaño de la instalación  : 3331,00 KiB
Encargado                 : Sergej Pupykin <pupykin.s+arch@gmail.com>
Fecha de creación         : vie 10 feb 2017 05:06:37 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

Link’s code:

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/mkisofs.py#L61

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/genisoimage.py#L61

Steps to reproduce:

- Install devede
- Create video DVD disc

PackagesAnyFeature RequestVery LowHigh[opendmarc] needs OpenRC init script and contains syste...Unconfirmed
0%
Task Description

Description:

* needs OpenRC init script and contains systemd files

Additional info:
* 1.3.2-1

 $ pkgfile -l opendmarc | grep systemd
 community/opendmarc     /usr/lib/systemd/
 community/opendmarc     /usr/lib/systemd/system/
 community/opendmarc     /usr/lib/systemd/system/opendmarc.service

Steps to reproduce:

* none

PackagesAnyFreedom IssueVery LowHigh[gitlab] systemd reference & command not found during i...Unconfirmed
0%
Task Description

(14/14) installing gitlab [##############################] 100%
/tmp/alpm_bCqhHf/.INSTALL: line 2: systemd-tmpfiles: command not found

PackagesAnyBug ReportVery LowHighmach package command crashes and fails to build the pac...Unconfirmed
0%
Task Description

I build Iceweasel-UXP with these commands:

cd /tmp
git clone https://github.com/MoonchildProductions/UXP
cd UXP/application/
git clone https://git.hyperbola.info:50100/software/iceweasel-uxp.git
cd ..
wget http://oscomp.hu/depot/iceweasel-uxp.mozconfig -O .mozconfig
./mach build

but after this, when i give the command

./mach package

then the following happens:
http://oscomp.hu/depot/mach_package_crash.log

PackagesStableFreedom IssueVery LowHighGNU Privacy Assistant (GPA)Unconfirmed
0%
Task Description

Hello Hyperbola!

GPA gives out the following errors upon opening the app.

First:

```
The GPGME library returned an unexpected
error at confdialog.c:1459. The error was:

    Unsupported protocol

This is either an installation problem or a bug in GPA.
GPA will now try to recover from this error.
```

Second:

```
Fatal Error in GPGME library
(invoked from file options.c, line 302):

    Unsupported protocol

The application will be terminated

What can I do to overcome these errors?
```
As this issue makes gpa app completely unusable, I have set this bug report’s severity as high.

I also request the admin to set priority to high due to it’s severity.

Thank you!

Regards,
RG.

PackagesTestingImplementation RequestVery LowMedium[yaics] add packageDeferred
0%
Task Description

Yaics is a simple GNU social client written in C++ and Qt and licensed under the GNU GPL 3.0 (or later).

Please implement yaics as an optional package.

https://stigatle.no/yaics/

https://gitlab.com/stigatle/yaics

PackagesStableBug ReportVery LowMedium[kodi-addons-visualization] addons don't workUnconfirmed
0%
Task Description

After installation, none of the addons is present in Kodi!

PackagesAnyPrivacy IssueVery LowMedium[avahi] avahi publishes the hostname by defaultUnconfirmed
0%
Task Description

By default, the ‘disable-publishing’ parameter in the [publish] section of avahi-daemon.conf is set to ‘no’, which can be seen in my opinion as a privacy issue as avahi broadcasts the hostname without the user’s consent even though this has been explicitly disabled in the settings of networkmanager.

ServicesWiki Page IssueImplementation RequestVery LowMediumAdd notification/subscription capabilities when a page ...Unconfirmed
0%
Task Description

After talking to Emulatorman, we think this would be a nice feature to add to our Hyperwiki to be able to subscribe to the original page in English to help tracking changing to the translated pages.
This implies to add the email notifications to the dokuwiki system

PackagesStableBug ReportVery LowMedium[cowsay] perl-text-charwidth dependency missingUnconfirmed
0%
Task Description

cowsay (cowsay-3.03-9.hyperbola1) is missing perl-text-charwidth dependency

Error message :

“Can’t locate Text/CharWidth.pm in @INC (you may need to install the Text::CharWidth module) (@INC contains: /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .) at /usr/bin/cowsay line 14.
BEGIN failed–compilation aborted at /usr/bin/cowsay line 14.”

After installing perl-text-charwidth, it works fine.

PackagesAnyImplementation RequestVery LowMedium[arm-linux-gnueabihf-gcc] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

arm-linux-gnueabihf-gcc

“The GNU Compiler Collection (arm-linux-gnueabihf)”

Also requires :

arm-linux-gnueabihf-binutils (A set of programs to assemble and manipulate binary and object files)
arm-linux-gnueabihf-glibc (GNU C Library)

https://aur.archlinux.org/packages/arm-linux-gnueabihf-gcc/

License : GPL

Thanks

PackagesAnyImplementation RequestVery LowMedium[etherpad-lite] add packageUnconfirmed
0%
Task Description

Hi,

Would be nice to add etherpad-lite to our pacman.

https://github.com/ether/etherpad-lite

https://aur.archlinux.org/packages/etherpad-lite/

PackagesStableBug ReportVery LowMedium[nfs-utils] missing idmapd.confUnconfirmed
0%
Task Description

Hello,

When mounting an NFS share, I get a warning about missing idmpad.conf

rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
4341: * Stopping idmapd ...

Debian includes a default config file for idmap :

[General]

Verbosity = 0
Pipefs-Directory = /run/rpc_pipefs
# set your own domain here, if id differs from FQDN minus hostname
# Domain = localdomain

[Mapping]

Nobody-User = nobody
Nobody-Group = nogroup
PackagesAnyImplementation RequestVery LowMedium[gitea] self-hosted git service Unconfirmed
0%
Task Description

Description:

A nice Git service would be welcomed in our pacman.

https://github.com/go-gitea/gitea https://aur.archlinux.org/packages/gitea/

PackagesAnyFeature RequestVery LowMediumQemu-kvm package requestUnconfirmed
0%
Task Description

1:2.8 or later, qemu-kvm

This would make qemu so much easier and faster, please support this package.

PackagesAnyDrop RequestVery LowMedium[hardening-wrapper] deprecated, not needed anymoreUnconfirmed
0%
Task Description

According to : https://github.com/thestinger/hardening-wrapper-deprecated

Wrapper scripts for building hardened executables by default (deprecated, replaced by standard Arch Linux toolchain changes)

Software DevelopmentIceweasel-UXPBackport RequestVery LowMediumRequest browser add-on: New Tab ToolsUnconfirmed
0%
Task Description

Name: New Tab Tools
Version: 81 (compatible Firefox version 52)
Source code: Github
Description: Customize Firefox’s. Tabs Page

https://github.com/darktrojan/newtabtools

https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/

PackagesStableBug ReportVery LowMediumPCManFM display different behaviorUnconfirmed
0%
Task Description

Description:

The problem is pcmanfm is not showing any partitions on the left side. It only show Home Folder, Desktop, Applications, Filesystem and the ext. hdd. If I include dbus-launch pcmanfm -d command, it show the other partitions on the left side of window but not ext. hdd. The drive/partitions are not encrypted.
I do have dbus, gvfs & ntfs-3g installed and active services.

Additional info:
* package version(s)
PCManFM 1.2.5 - using LibFM ver. 1.2.5

Steps to reproduce:
Original install from the livecd with LXDE but I may run Openbox standalone and get the same behavior with either environment. I do not have this issue running other distros.

PackagesAnyFeature RequestVery LowMediumRemove dependency of packages on pulseaudio/libpulseUnconfirmed
0%
Task Description

Similar to systemd, pulseaudio or libpulse is forced upon users as many packages require it such as kodi, gnome-shell (and thus also gdm), ffmpeg, gst-plugins-good, simplescreenrecorder, clementine, empathy, seamonkey (iceape), fluidsynth, mumble and qemu, Most/all of these packages can probably be compiled with pulseaudio or libpulse as an optional dependency instead.

PackagesAnyBug ReportVery LowMedium[mate-panel] country flags for keyboard layouts are mis...Unconfirmed
0%
Task Description

After enabling show-flags via dconf-editor in org.mate.peripherals-keyboard-xkb.indicator the flags don’t show up. The simple workaround is to copy flags you want into ~/.icons/flags (after creating the directory) from here

https://github.com/linuxmint/flags/tree/master/usr/share/iso-flag-png

and then to reboot.

It seems to be this bug:

https://askubuntu.com/questions/1059324/how-to-show-current-keyboard-layout-on-mate-panel-as-country-flag/1059325#1059325

PackagesAnyBug ReportVery LowMedium[ffmpegthumbnailer] missing support for some media form...Unconfirmed
0%
Task Description

ffmpegthumbnailer does not support some media formats since they do not appear in its configuration file ffmpegthumbnailer.thumbnailer which can be found in /usr/share/thumbnailers/. By editing the file ffmpegthumbnailer.thumbnailer one can add thumbnail support for embedded art in audio formats such as flac and mp3 (using the -m flag) and thumbnail support for webp (a new image format which iceweasel-uxp and gthumb support). I’m attaching my edited file (I just added a few common audio formats and webp and added the -m flag and removed the -f flag).

PackagesAnyImplementation RequestVery LowMedium[foxtrotgps] please add package to reposUnconfirmed
0%
Task Description

Unlike other mapping software (gnome-maps, emerillon) it does not depend on geoclue/geoclue2 (or on kde packages like marble). The package was added to Arch’s official repos over a year ago. Their PKGBUILD builds fine.

PackagesAnyImplementation RequestVery LowMedium[peertube] Add new PackageUnconfirmed
0%
Task Description

Description:

Hi guys. Could they add PeerTube to Hyperbola?

It’s on AUR.

Under the AGPLv3 license

Additional info:

I see that the PeerTube help configuration with an init.d

PackagesAnyFeature RequestVery LowMedium[slim-themes] please add hyperbola branded variantUnconfirmed
0%
Task Description

slim-themes seems to be considered free according to Parabola - they have an issue with arch branding (slim-themes::::[branding][FIXME:package] has “archlinux” theme) which they resolve be creating the package parabola-themes-slim. Perhaps this can be the basis for hyperbola branded themes.

https://git.parabola.nu/blacklist.git/plain/blacklist.txt https://www.parabola.nu/packages/libre/x86_64/parabola-themes-slim/

PackagesStableBackport RequestVery LowMediumRequest for addon used by Iceweasel-UXP: uMatrixUnconfirmed
0%
Task Description

Hello, would it be possible to have the addon uMatrix ported to be used within the UXP-platform? The addon is complete open and can be found here https://github.com/gorhill/uMatrix

I’ve tried to install different versions and it seems to be incompatible with the concurrent version of Iceweasel-UXP from the repositoy.

PackagesAnyFeature RequestVery LowMediumAdd Trinity DesktopUnconfirmed
0%
Task Description

I would like this, because, it looks even better than xfce4. It does use an older qt3 though, BUT, they are maintaining QT3 and improving it themselves.

Plus, its more lightweight than xfce4 and maybe even lxqt too without looking like crap like lxqt and yet still is better than a WM.

I know you don’t like stuff that is abandonware in any sense, but given its being maintained, I hope you will add it.

But let me know.

PackagesStableUpdate RequestVery LowMedium[xfe] update package to 1.43.1Researching
0%
Task Description

In the latest version fixes several minor bugs and search file function issue[1].

[1]: http://roland65.free.fr/xfe/ (see 1.43 and 1.43.1 in the news section)

PackagesAnySecurity IssueVery LowMedium[patch] CVE-2018-6951 - NULL pointer DoSUnconfirmed
0%
Task Description

An issue was discovered in GNU patch through 2.7.6. There is a segmentation fault, associated with a NULL pointer dereference, leading to a denial of service in the intuit_diff_type function in pch.c, aka a “mangled rename” issue.

https://security-tracker.debian.org/tracker/CVE-2018-6951

PackagesAnySecurity IssueVery LowMedium[qemu] Multiple CVEUnconfirmed
0%
Task Description

CVE-2018-20123 QEMU: pvrdma: memory leakage in device hotplug
https://www.openwall.com/lists/oss-security/2018/12/13/4

CVE-2018-16872 Qemu: usb-mtp: path traversal by host filesystem
manipulation in Media Transfer Protocol (MTP)
https://www.openwall.com/lists/oss-security/2018/12/13/11

Patches included at above URLs.

PackagesAnyImplementation RequestVery LowMedium[purple-matrix] Please add packageUnconfirmed
0%
Task Description

Package is a libpurple plugin for the Matrix protocol which is consistent with Hyperbola’s social contract as Matrix is a federated protocol.

Source code can be found here licensed under GPLv2:

https://github.com/matrix-org/purple-matrix

PKGBUILD for git version is available here (last stable release is from two years ago so git version is probably the best version to use):

https://aur.archlinux.org/packages/purple-matrix-git/

Software DevelopmentIceape-UXPImplementation RequestVery LowMediumRandom agent spoofer for IceapeUnconfirmed
0%
Task Description

0.9.5.8.4 version would be good to have.

PackagesAnyImplementation RequestVery LowMedium[i3-gaps] Add new packageUnconfirmed
0%
Task Description

Description: i3-gaps is a fork of i3 that properly implements gaps.

Additional info:
It is implemented in the AUR https://www.archlinux.org/packages/community/x86_64/i3-gaps/ and it’s source is available on github: https://github.com/Airblader/i3

ServicesHyperWiki/DokuWikiImplementation RequestVery LowMediumProvide binaries for the Ice*-UXP applications in their...Unconfirmed
0%
Task Description

This would ease their usage on other distros.

PackagesAnyBackport RequestVery LowMediumRandom Agent Spoofer for IceapeUnconfirmed
0%
Task Description

random_agent_spoofer-0.9.5.8.4-fx.xpi is the version I desire, can you implement it?

Showing tasks 201 - 250 of 454 Page 5 of 10<<First - 3 - 4 - 5 - 6 - 7 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing