|
Software Development | General | Implementation Request | Very High | Critical | POWER (ppc64le) porting | Deferred | |
Task Description
The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .
Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.
For the future of free computing, we need support architectures that do not come with such malware pre-installed, and the Power9-based Talos II promises to be a great architecture example for workstations and servers environments where Hyperbola is focused since is a fully free long-term support distribution.
Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the POWER architecture (power64le).
NOTE: POWER porting is focused only for Hyperbola GNU/Linux-libre .
|
|
Software Development | General | Implementation Request | Very High | Critical | ARM (aarch and armv7h) porting | Deferred | |
Task Description
The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .
Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.
For the future of free computing, we need support architectures that do not come with such malware pre-installed, and ARM A7/A53 promises to be a great architecture example for low-power computers, laptops and embedded systems.
NOTE: ARM porting is focused only for HyperbolaBSD .
|
|
Packages | Any | Implementation Request | Medium | Medium | [uzem][uzebox] add uzem emulator and uzebox firmware pa... | Assigned | |
Task Description
Add “uzem” emulator and “uzebox” firmware packages[0][1].
It’s a emulator and firmware for fully free 8bit game console.
[0]:http://belogic.com/uzebox/index.asp (no https found) [1]:https://github.com/Uzebox/uzebox
|
|
Packages | Any | Implementation Request | Medium | Medium | [ncdu] add new package | Deferred | |
Task Description
PKGBUILD
# $Id: PKGBUILD 187611 2016-08-26 15:44:01Z bisson $
# Contributor: lp76 <l.peduto@gmail.com>
# Contributor: Daenyth <Daenyth+Arch AT gmail DOT com>
# Maintainer: Gaetan Bisson <bisson@archlinux.org>
pkgname=ncdu
pkgver=1.12
pkgrel=1.hyperbola1
pkgdesc='Disk usage analyzer with an ncurses interface'
url='https://dev.yorhel.nl/ncdu'
license=('custom:MIT')
depends=('ncurses')
arch=('i686' 'x86_64')
validpgpkeys=('74460D32B80810EBA9AFA2E962394C698C2739FA')
source=("https://dev.yorhel.nl/download/${pkgname}-${pkgver}.tar.gz"{,.asc})
sha512sums=('20620dd79d2af878442769e097f13806f64f23875dcb85ebccd573a3de43aba5663d496049b64015d13f9a79d624298032c008ef61dfb6f61d8b12902b8dca12'
'SKIP')
build() {
cd "${srcdir}/${pkgname}-${pkgver}"
./configure --prefix=/usr
make
}
package() {
cd "${srcdir}/${pkgname}-${pkgver}"
make DESTDIR="${pkgdir}" install
install -Dm644 COPYING "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
}
|
|
Packages | Any | Implementation Request | Medium | Medium | [searx] add new package | Deferred | |
Task Description
Hi André, you could make an init for the searx search engine, it happens that I want to launch it from local to avoid being in searx.me or searx.riseup.net.
I have seen that there is a PKGBUILD in AUR [0]. I think it is necessary to make one with the init Openrc
[0]: https://aur.archlinux.org/packages/searx-py3/
|
|
Services | Flyspray Branding | Implementation Request | Medium | Medium | Add Hyperbola branding to HyperTask | In Progress | |
Task Description
Add Hyperbola branding to HyperTask such as HyperWiki and HyperForum for prolixity reasons.
|
|
Services | HyperWiki/DokuWiki | Implementation Request | Medium | Medium | Libreboot hardening grub guide | Unconfirmed | |
Task Description
I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,
https://libreboot.org/docs/gnulinux/grub_hardening.html
I wondered if there is anything different that needs to be done to get this part done:
gpg –homedir keys –detach-sign my.initramfs gpg –homedir keys –detach-sign my.kernel gpg –homedir keys –detach-sign libreboot_grub.cfg gpg –homedir keys –detach-sign my.grubtest.cfg
it gives me a bunch of weird errors
|
|
Packages | Any | Implementation Request | Medium | Low | Scid vs. PC – PGN Reader/ChessBase | Unconfirmed | |
Task Description
http://scidvspc.sourceforge.net/
|
|
Packages | Any | Implementation Request | Medium | Low | Stockfish Chess Engine | Unconfirmed | |
Task Description
«Unlike most chess engines, Stockfish is open source (GPL license). That means you can read the code, modify it, contribute back, and even use it in your own projects.» I do not know if it is libre. If it is, together with Scid, Hyperbola is one step closer for every chess lover out there who also loves freedom! https://stockfishchess.org/
|
|
Packages | Testing | Implementation Request | Medium | Medium | linux-libre-lts-hypersec: New package with extra securi... | Deferred | |
Task Description
Description: Per a user request and to better secure the kernel, we can embed the cryptsetup and ciphers in the kernel. This would mean rather than exposed modules, they are built-in to the kernel and ready to use even without an intramfs.
To be embedded: ciphers aes, twofish, serpent; sha256, sha512 - and the necessary modules (don’t forget the block modes xts, lvm and cryptsetup ...)
Additionally, we could include USB Guard and any other features that meet our social contract and security outlook.
|
|
Software Development | HyperTools | Implementation Request | Low | Low | [hypertools] create libretools replacement for Hyperbol... | Deferred | |
Task Description
Create hypertools to replace libretools package for HyperbolaBSD and GNU/Linux
It’s long period to develop this package. For now, a systemd-nspawn wrapper is being developed for “libretools”[0]
[0]:https://issues.hyperbola.info/index.php?do=details&task_id=86
|
|
Packages | Any | Implementation Request | Low | Low | [nut] add Network UPS Tools 2.7.x package | Assigned | |
Task Description
Add “nut” package.
Useful for uninterruptible power supplies, power distribution units, solar controllers and servers power supply units.
|
|
Packages | Testing | Implementation Request | Low | Medium | [spacefm] add new package | In Progress | |
Task Description
Add SpaceFM File Manager for Hyperbola
Aur Package: spacefm Debian Package: spacefm
|
|
Packages | Any | Implementation Request | Low | Low | [codecrypt] add new package | Unconfirmed | |
Task Description
This is a GnuPG-like unix program for encryption and signing that uses only quantum-computer-resistant algorithms:
McEliece cryptosystem (compact QC-MDPC variant) for encryption
Hash-based Merkle tree algorithm (FMTSeq variant) for digital signatures
Codecrypt is free software. The code is licensed under terms of LGPL3 in a good hope that it will make combinations with other tools easier.
|
|
Packages | Any | Implementation Request | Low | Low | [opmsg] add new package | Researching | |
Task Description
Description: opmsg is a replacement for gpg which can encrypt/sign/verify your mails or create/verify detached signatures of local files. Even though the opmsg output looks similar, the concept is entirely different.
Additional info: https://aur.archlinux.org/packages/opmsg/
|
|
Packages | Any | Implementation Request | Very Low | Low | [3proxy] add package since it's useful for tor on ftp p... | Deferred | |
Task Description
Add “3proxy”[0] package
Useful for tor on ftp proxy[1]
[0]:https://github.com/z3APA3A/3proxy [1]:https://trac.torproject.org/projects/tor/wiki/doc/TorifyHOWTO/FTP
|
|
Packages | Any | Implementation Request | Very Low | Low | [plymouth] add package | Deferred | |
Task Description
Plymouth is an application that runs very early in the boot process (even before the root filesystem is mounted!) that provides a graphical boot animation while the boot process happens in the background.
Please implement plymouth as an optional package.
|
|
Packages | Testing | Implementation Request | Very Low | Medium | [yaics] add package | Deferred | |
Task Description
Yaics is a simple GNU social client written in C++ and Qt and licensed under the GNU GPL 3.0 (or later).
Please implement yaics as an optional package.
https://stigatle.no/yaics/
https://gitlab.com/stigatle/yaics
|
|
Packages | Testing | Implementation Request | Very Low | Low | [sirikata] add package | Deferred | |
Task Description
Sirikata a platform for virtual worlds.
Sirikata is a platform for virtual worlds. We provide a set of libraries and protocols which can be used to deploy a virtual world, as well as fully featured sample implementations of services for hosting and deploying these worlds.
Please implement sirikata as an optional package.
|
|
Packages | Any | Implementation Request | Very Low | Low | [multipath-tools] add package | Deferred | |
Task Description
Hello,
Could it be possible to add this package :
multipath-tools
“Multipath tools for Linux (including kpartx)”
License : GPL2
to the repo ?
Thank you
|
|
Packages | Any | Implementation Request | Very Low | Low | [thinkfan] add package | Deferred | |
Task Description
Could it be possible to add this package :
thinkfan
“A minimalist fan control program. Supports the sysfs hwmon interface and thinkpad_acpi”
License : GPL
to the repo ?
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [fsearch] add package | Unconfirmed | |
Task Description
Could it be possible to add :
fsearch
https://github.com/cboxdoerfer/fsearch
License : GPL
|
|
Packages | Any | Implementation Request | Very Low | Low | [flowblade] add package | Unconfirmed | |
Task Description
Could it be possible to add :
flowblade
https://www.parabola.nu/packages/pcr/any/flowblade/
“a multitrack non-linear video editor for GNU/Linux”
License : GPL3
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [whipper] add package | Unconfirmed | |
Task Description
Could it be possible to add :
whipper
“A Unix CD ripper aiming for accuracy over speed – forked from morituri”
https://www.parabola.nu/packages/community/any/whipper/ https://github.com/JoeLametta/whipper
License : GPL3
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [sacd-extract] add package | Unconfirmed | |
Task Description
Could it be possible to add :
sacd-extract
“Extract DSD files from an SACD image”
https://www.parabola.nu/packages/pcr/x86_64/sacd-extract/ https://sourceforge.net/p/sacd-ripper/
License : GPL2
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [radiotray] add package | Unconfirmed | |
Task Description
Hello,
Could it be possible to add :
radiotray
“An online radio streaming player that runs on a Linux system tray.”
https://aur.archlinux.org/packages/radiotray/
License : GPL
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [ttf-font-awesome] add ttf-font-awesome font | Unconfirmed | |
Task Description
Could it be possible to add :
ttf-font-awesome
to the repo ?
https://www.parabola.nu/packages/community/any/ttf-font-awesome/ http://fontawesome.io/
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [awesome-terminal-fonts] add package | Unconfirmed | |
Task Description
Could it be possible to add :
awesome-terminal-fonts
to the repo please ?
https://www.parabola.nu/packages/community/any/awesome-terminal-fonts/ https://github.com/gabrielelana/awesome-terminal-fonts
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [w_scan] add package | Unconfirmed | |
Task Description
Hello,
Could it be possible to add this package :
w_scan
“Universal ATSC and DVB blind scanner”
https://aur.archlinux.org/packages/w_scan/
License : GPL
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [qpdfview] add package | Unconfirmed | |
Task Description
Hello,
Could it be possible to add this package :
qpdfview
“A tabbed PDF viewer using the poppler library.”
https://www.parabola.nu/packages/community/x86_64/qpdfview/
License : GPL2
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [menulibre] add package | Unconfirmed | |
Task Description
Hello,
Could it be possible to add this package :
menulibre
“An advanced menu editor that provides modern features in a clean, easy-to-use interface. All without GNOME dependencies”
https://aur.archlinux.org/packages/menulibre/
License : GPL3
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [crunch] add package | Unconfirmed | |
Task Description
Hello,
Could it be possible to add this package :
crunch
“A wordlist generator where you can specify a standard character set or a character set you specify and generate all possible combinations and permutations.”
https://aur.archlinux.org/packages/crunch/
License : GPL2
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [dmg2img] add package | Unconfirmed | |
Task Description
Hello,
Could it be possible to add this package :
dmg2img
“A CLI tool to uncompress Apple’s compressed DMG files to the HFS+ IMG format”
https://aur.archlinux.org/packages/dmg2img/
License : GPL2
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [gcdemu] add package | Unconfirmed | |
Task Description
Hello,
Could it be possible to add this package :
gcdemu
“GNOME panel applet controlling cdemu-daemon”
https://aur.archlinux.org/packages/gcdemu
http://cdemu.sourceforge.net/
License : GPL2
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [python-cheat] add package | Unconfirmed | |
Task Description
Hello,
Could it be possible to add this package :
python-cheat
“Cheat allows you to create and view interactive cheatsheets on the command-line.”
https://aur.archlinux.org/packages/python-cheat/
https://github.com/chrisallenlane/cheat
License : GPL3
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [accuraterip-checksum] add package | Unconfirmed | |
Task Description
Hello,
Could it be possible to add this package :
accuraterip-checksum
“A C99 commandline program to compute the AccurateRip checksum of singletrack WAV files”
https://www.parabola.nu/packages/community/x86_64/accuraterip-checksum/
License : GPL
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [pacpl] Add package | Unconfirmed | |
Task Description
Hello,
Could it be possible to add this package :
pacpl
“Convert multiple audio types from one format to another.”
https://aur.archlinux.org/packages/pacpl/
License : GPL
Dependencies needed (and currently missing in Hyperbola repo) :
perl-ogg-vorbis-header perl-mp4-info perl-mp3-tag perl-audio-flac-header perl-audio-musepack perl-parallel-forkmanager perl-cddb
|
|
Packages | Any | Implementation Request | Very Low | Low | [gmusicbrowser] Add package | Unconfirmed | |
Task Description
Hello,
Could it be possible to add this package :
gmusicbrowser
“A customizable open-source jukebox for large collections”
https://www.parabola.nu/packages/pcr/any/gmusicbrowser/
License : GPL3
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [quiterss] add package | Unconfirmed | |
Task Description
Hello,
Could it be possible to add this package :
quiterss
“Fast and light RSS/Atom feed reader written in Qt/С++”
https://aur.archlinux.org/packages/quiterss
License : GPL3
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [wekan] add package | Unconfirmed | |
Task Description
Hello,
Would it be possible to add this package :
wekan
“Wekan is an completely Open Source and Free software collaborative kanban board application”
https://github.com/wekan/wekan
License : MIT
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [moloch] add package | Unconfirmed | |
Task Description
Hello,
Would it be possible to add this package :
moloch
“ Moloch is an open source, large scale, full packet capturing, indexing, and database system.”
http://molo.ch
https://github.com/aol/moloch
License : Apache2
Thanks
|
|
Services | Wiki Page Issue | Implementation Request | Very Low | Medium | Add notification/subscription capabilities when a page ... | Unconfirmed | |
Task Description
After talking to Emulatorman, we think this would be a nice feature to add to our Hyperwiki to be able to subscribe to the original page in English to help tracking changing to the translated pages. This implies to add the email notifications to the dokuwiki system
|
|
Packages | Any | Implementation Request | Very Low | Low | [powerpill] add package | Unconfirmed | |
Task Description
Hello,
Could it be possible to add this package :
powerpill
“Pacman wrapper for faster downloads.”
https://aur.archlinux.org/packages/powerpill/
https://xyne.archlinux.ca/projects/powerpill
License : GPL
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [flacon] add package | Unconfirmed | |
Task Description
Hello,
Could it be possible to add this package :
flacon
“Extracts individual tracks from one big audio file containing the entire album of music and saves them as separate audio files.”
https://aur.archlinux.org/packages/flacon/
https://flacon.github.io/
License : LGPL2.1
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Medium | [arm-linux-gnueabihf-gcc] add package | Unconfirmed | |
Task Description
Hello,
Could it be possible to add this package :
arm-linux-gnueabihf-gcc
“The GNU Compiler Collection (arm-linux-gnueabihf)”
Also requires :
arm-linux-gnueabihf-binutils (A set of programs to assemble and manipulate binary and object files) arm-linux-gnueabihf-glibc (GNU C Library)
https://aur.archlinux.org/packages/arm-linux-gnueabihf-gcc/
License : GPL
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Low | [gogs] add package | Unconfirmed | |
Task Description
Hello,
It would be great to add this package :
gogs
“Self Hosted Git Service written in Go”
https://aur.archlinux.org/packages/gogs
openrc init scripts : https://aur.archlinux.org/packages/gogs-openrc
License : GPL
Thanks
|
|
Packages | Any | Implementation Request | Very Low | Medium | [etherpad-lite] add package | Unconfirmed | |
Task Description
Hi,
Would be nice to add etherpad-lite to our pacman.
https://github.com/ether/etherpad-lite
https://aur.archlinux.org/packages/etherpad-lite/
|
|
Packages | Any | Implementation Request | Very Low | Low | [gimagereader] add package | Unconfirmed | |
Task Description
Hello,
Could it be possible to add this package :
gimagereader
“A graphical frontend to tesseract-ocr”
https://aur.archlinux.org/packages/gimagereader
License : GPL3
Thanks
|
|
Installation | General | Implementation Request | Very Low | Low | To make installation instructions and get use of live I... | Unconfirmed | |
Task Description
I have installed multiple times Hyperbola, 4 times on 4 different notebooks.
What I have noticed is that the live ISO is quite huge in relation to the task that should be done. Namely. the live ISO shall at least contain some first packages, so that they do not need to be downloaded online.
Best would be if the live ISO can be copied straight and that system can run from ISO/DVD without having Internet. At least one simple graphical environment shall be included.
Further, I have noticed that there is only network instructions as HTML file.
I would rather call it installation-instructions.html to make it clear for people what it is. Or simply: INSTALL.html so that people understand what it is.
It says just network.html if I remember well.
Then there is absolutely no point or link or reference to the installation instructions.
Each time I got a network I had to go to either duckduckgo search engine or to hyperbola.info website and then I tried with lynx to find installation instructions.
It is not straight, not quite clearly in open, it is in Wiki, but that is quite hard to find.
We have to put ourselves in the shoes of those in need of free software. Millions of people need free software.
Many of us live in a developed western countries.
Yet millions of people in need of this software live in South America, Africa, Asia, Eastern Europe.
There are millions of students that could advance their study, and that could progress faster with free software.
In those countries Internet is often non-existent, universities may be located in poor network areas, Internet is being fetched by using mobile phones.
So if there is a live distribution, such shall at least contain basic software, which really can fit onto any DVD, and that as such can be copied on the computer without using Internet. Upgrades could be fetched by using Internet.
And there shall be clear reference, link or file about installation. There shall be no need to go to Internet to install the software.
|
|
Services | Flyspray Issue | Implementation Request | Very Low | Low | Setting avatar picture on flyspry at issues.hyperbola.i... | Unconfirmed | |
Task Description
So avatar uploading is not working well, and picture is getting minimized to nothing.
|