All Projects

ProjectCategoryTask Type  ascPrioritySeveritySummaryStatusProgress
Software DevelopmentIceweasel-UXPImplementation RequestDeferLowSwiftweasel-UXP theme for Iceweasel-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftweasel was a Firefox-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since there are users encouraging us develop a Palemoon-based application , and Swiftweasel contains non-trademarked graphics and logos, we could port Swiftweasel to UXP platform as theme for Iceweasel-UXP.

Software DevelopmentIcedove-UXPImplementation RequestDeferLowSwiftdove-UXP theme for Icedove-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftdove was a Thunderbird-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since FossaMail may potentially be revived on UXP in the future [0] and Swiftdove contains non-trademarked graphics and logos, we could port Swiftdove to UXP platform as theme for Icedove-UXP.

Software DevelopmentGeneralImplementation RequestDeferCriticalRISC-V (riscv64) porting + multilib supportDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and RISC-V promises to be a great architecture example for low-power computers, laptops and embedded systems, also as ARM architecture replacement.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the RISC-V architecture (riscv64) with multilib support.

NOTE: RISC-V porting is focused only for Hyperbola GNU/Linux-libre .

PackagesAnyImplementation RequestVery LowLow[3proxy] add package since it's useful for tor on ftp p...Deferred
0%
Task Description

Add “3proxy”[0] package

Useful for tor on ftp proxy[1]

[0]:https://github.com/z3APA3A/3proxy [1]:https://trac.torproject.org/projects/tor/wiki/doc/TorifyHOWTO/FTP

PackagesAnyImplementation RequestVery LowLow[plymouth] add packageDeferred
0%
Task Description

Plymouth is an application that runs very early in the boot process (even before the root filesystem is mounted!) that provides a graphical boot animation while the boot process happens in the background.

Please implement plymouth as an optional package.

PackagesTestingImplementation RequestVery LowMedium[yaics] add packageDeferred
0%
Task Description

Yaics is a simple GNU social client written in C++ and Qt and licensed under the GNU GPL 3.0 (or later).

Please implement yaics as an optional package.

https://stigatle.no/yaics/

https://gitlab.com/stigatle/yaics

PackagesTestingImplementation RequestVery LowLow[sirikata] add packageDeferred
0%
Task Description

Sirikata a platform for virtual worlds.

Sirikata is a platform for virtual worlds. We provide a set of libraries and protocols which can be used to deploy a virtual world, as well as fully featured sample implementations of services for hosting and deploying these worlds.

Please implement sirikata as an optional package.

PackagesAnyImplementation RequestVery LowLow[multipath-tools] add packageDeferred
0%
Task Description

Hello,

Could it be possible to add this package :

multipath-tools

“Multipath tools for Linux (including kpartx)”

License : GPL2

to the repo ?

Thank you

PackagesAnyImplementation RequestVery LowLow[thinkfan] add packageDeferred
0%
Task Description

Could it be possible to add this package :

thinkfan

“A minimalist fan control program. Supports the sysfs hwmon interface and thinkpad_acpi”

License : GPL

to the repo ?

Thanks

PackagesAnyImplementation RequestVery LowLow[fsearch] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

fsearch

https://github.com/cboxdoerfer/fsearch

License : GPL

PackagesAnyImplementation RequestVery LowLow[flowblade] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

flowblade

https://www.parabola.nu/packages/pcr/any/flowblade/

“a multitrack non-linear video editor for GNU/Linux”

License : GPL3

Thanks

PackagesAnyImplementation RequestVery LowLow[whipper] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

whipper

“A Unix CD ripper aiming for accuracy over speed – forked from morituri”

https://www.parabola.nu/packages/community/any/whipper/ https://github.com/JoeLametta/whipper

License : GPL3

Thanks

PackagesAnyImplementation RequestVery LowLow[sacd-extract] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

sacd-extract

“Extract DSD files from an SACD image”

https://www.parabola.nu/packages/pcr/x86_64/sacd-extract/ https://sourceforge.net/p/sacd-ripper/

License : GPL2

Thanks

PackagesAnyImplementation RequestVery LowLow[radiotray] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add :

radiotray

“An online radio streaming player that runs on a Linux system tray.”

https://aur.archlinux.org/packages/radiotray/

License : GPL

Thanks

PackagesAnyImplementation RequestVery LowLow[ttf-font-awesome] add ttf-font-awesome fontUnconfirmed
0%
Task Description

Could it be possible to add :

ttf-font-awesome

to the repo ?

https://www.parabola.nu/packages/community/any/ttf-font-awesome/ http://fontawesome.io/

Thanks

PackagesAnyImplementation RequestVery LowLow[awesome-terminal-fonts] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

awesome-terminal-fonts

to the repo please ?

https://www.parabola.nu/packages/community/any/awesome-terminal-fonts/ https://github.com/gabrielelana/awesome-terminal-fonts

Thanks

PackagesAnyImplementation RequestVery LowLow[w_scan] add package Unconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

w_scan

“Universal ATSC and DVB blind scanner”

https://aur.archlinux.org/packages/w_scan/

License : GPL

Thanks

PackagesAnyImplementation RequestVery LowLow[qpdfview] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

qpdfview

“A tabbed PDF viewer using the poppler library.”

https://www.parabola.nu/packages/community/x86_64/qpdfview/

License : GPL2

Thanks

PackagesAnyImplementation RequestVery LowLow[menulibre] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

menulibre

“An advanced menu editor that provides modern features in a clean, easy-to-use interface. All without GNOME dependencies”

https://aur.archlinux.org/packages/menulibre/

License : GPL3

Thanks

PackagesAnyImplementation RequestVery LowLow[crunch] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

crunch

“A wordlist generator where you can specify a standard character set or a character set you specify and generate all possible combinations and permutations.”

https://aur.archlinux.org/packages/crunch/

License : GPL2

Thanks

PackagesAnyImplementation RequestVery LowLow[dmg2img] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

dmg2img

“A CLI tool to uncompress Apple’s compressed DMG files to the HFS+ IMG format”

https://aur.archlinux.org/packages/dmg2img/

License : GPL2

Thanks

PackagesAnyImplementation RequestVery LowLow[gcdemu] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

gcdemu

“GNOME panel applet controlling cdemu-daemon”

https://aur.archlinux.org/packages/gcdemu

http://cdemu.sourceforge.net/

License : GPL2

Thanks

PackagesAnyImplementation RequestVery LowLow[python-cheat] add package Unconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

python-cheat

“Cheat allows you to create and view interactive cheatsheets on the command-line.”

https://aur.archlinux.org/packages/python-cheat/

https://github.com/chrisallenlane/cheat

License : GPL3

Thanks

PackagesAnyImplementation RequestVery LowLow[accuraterip-checksum] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

accuraterip-checksum

“A C99 commandline program to compute the AccurateRip checksum of singletrack WAV files”

https://www.parabola.nu/packages/community/x86_64/accuraterip-checksum/

License : GPL

Thanks

PackagesAnyImplementation RequestVery LowLow[pacpl] Add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

pacpl

“Convert multiple audio types from one format to another.”

https://aur.archlinux.org/packages/pacpl/

License : GPL

Dependencies needed (and currently missing in Hyperbola repo) :

perl-ogg-vorbis-header perl-mp4-info perl-mp3-tag perl-audio-flac-header perl-audio-musepack perl-parallel-forkmanager perl-cddb
PackagesAnyImplementation RequestVery LowLow[gmusicbrowser] Add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

gmusicbrowser

“A customizable open-source jukebox for large collections”

https://www.parabola.nu/packages/pcr/any/gmusicbrowser/

License : GPL3

Thanks

PackagesAnyImplementation RequestVery LowLow[quiterss] add package Unconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

quiterss

“Fast and light RSS/Atom feed reader written in Qt/С++”

https://aur.archlinux.org/packages/quiterss

License : GPL3

Thanks

PackagesAnyImplementation RequestVery LowLow[wekan] add package Unconfirmed
0%
Task Description

Hello,

Would it be possible to add this package :

wekan

“Wekan is an completely Open Source and Free software collaborative kanban board application”

https://github.com/wekan/wekan

License : MIT

Thanks

PackagesAnyImplementation RequestVery LowLow[moloch] add package Unconfirmed
0%
Task Description

Hello,

Would it be possible to add this package :

moloch

“ Moloch is an open source, large scale, full packet capturing, indexing, and database system.”

http://molo.ch

https://github.com/aol/moloch

License : Apache2

Thanks

ServicesWiki Page IssueImplementation RequestVery LowMediumAdd notification/subscription capabilities when a page ...Unconfirmed
0%
Task Description

After talking to Emulatorman, we think this would be a nice feature to add to our Hyperwiki to be able to subscribe to the original page in English to help tracking changing to the translated pages.
This implies to add the email notifications to the dokuwiki system

PackagesAnyImplementation RequestVery LowLow[powerpill] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

powerpill

“Pacman wrapper for faster downloads.”

https://aur.archlinux.org/packages/powerpill/

https://xyne.archlinux.ca/projects/powerpill

License : GPL

Thanks

PackagesAnyImplementation RequestVery LowLow[flacon] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

flacon

“Extracts individual tracks from one big audio file containing the entire album of music and saves them as separate audio files.”

https://aur.archlinux.org/packages/flacon/

https://flacon.github.io/

License : LGPL2.1

Thanks

PackagesAnyImplementation RequestVery LowMedium[arm-linux-gnueabihf-gcc] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

arm-linux-gnueabihf-gcc

“The GNU Compiler Collection (arm-linux-gnueabihf)”

Also requires :

arm-linux-gnueabihf-binutils (A set of programs to assemble and manipulate binary and object files)
arm-linux-gnueabihf-glibc (GNU C Library)

https://aur.archlinux.org/packages/arm-linux-gnueabihf-gcc/

License : GPL

Thanks

PackagesAnyImplementation RequestVery LowLow[gogs] add packageUnconfirmed
0%
Task Description

Hello,

It would be great to add this package :

gogs

“Self Hosted Git Service written in Go”

https://aur.archlinux.org/packages/gogs

openrc init scripts : https://aur.archlinux.org/packages/gogs-openrc

License : GPL

Thanks

PackagesAnyImplementation RequestVery LowMedium[etherpad-lite] add packageUnconfirmed
0%
Task Description

Hi,

Would be nice to add etherpad-lite to our pacman.

https://github.com/ether/etherpad-lite

https://aur.archlinux.org/packages/etherpad-lite/

PackagesAnyImplementation RequestVery LowLow[gimagereader] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

gimagereader

“A graphical frontend to tesseract-ocr”

https://aur.archlinux.org/packages/gimagereader

License : GPL3

Thanks

InstallationGeneralImplementation RequestVery LowLowTo make installation instructions and get use of live I...Unconfirmed
0%
Task Description

I have installed multiple times Hyperbola, 4 times on 4 different notebooks.

What I have noticed is that the live ISO is quite huge in relation to the task that should be done. Namely. the live ISO shall at least contain some first packages, so that they do not need to be downloaded online.

Best would be if the live ISO can be copied straight and that system can run from ISO/DVD without having Internet. At least one simple graphical environment shall be included.

Further, I have noticed that there is only network instructions as HTML file.

I would rather call it installation-instructions.html to make it clear for people what it is. Or simply: INSTALL.html so that people understand what it is.

It says just network.html if I remember well.

Then there is absolutely no point or link or reference to the installation instructions.

Each time I got a network I had to go to either duckduckgo search engine or to hyperbola.info website and then I tried with lynx to find installation instructions.

It is not straight, not quite clearly in open, it is in Wiki, but that is quite hard to find.

We have to put ourselves in the shoes of those in need of free software. Millions of people need free software.

Many of us live in a developed western countries.

Yet millions of people in need of this software live in South America, Africa, Asia, Eastern Europe.

There are millions of students that could advance their study, and that could progress faster with free software.

In those countries Internet is often non-existent, universities may be located in poor network areas, Internet is being fetched by using mobile phones.

So if there is a live distribution, such shall at least contain basic software, which really can fit onto any DVD, and that as such can be copied on the computer without using Internet. Upgrades could be fetched by using Internet.

And there shall be clear reference, link or file about installation. There shall be no need to go to Internet to install the software.

ServicesFlyspray IssueImplementation RequestVery LowLowSetting avatar picture on flyspry at issues.hyperbola.i...Unconfirmed
0%
Task Description

So avatar uploading is not working well, and picture is getting minimized to nothing.

PackagesAnyImplementation RequestVery LowHigh[glom]: should depend on libgdaUnconfirmed
0%
Task Description

Description:

glom cannot run without libgda, so it should depend on libgda package

PackagesAnyImplementation RequestVery LowMedium[gitea] self-hosted git service Assigned
0%
Task Description

Description:

A nice Git service would be welcomed in our pacman.

- https://github.com/go-gitea/gitea

- https://www.archlinux.org/packages/community/x86_64/gitea/

PackagesAnyImplementation RequestVery LowLow[exifread] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

exifread

“Python library to extract EXIF data from tiff and jpeg files”

https://aur.archlinux.org/packages/exifread/

Thanks

PackagesAnyImplementation RequestVery LowLow[obmenu-generator] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

obmenu-generator

A fast pipe/static menu generator for the Openbox Window Manager (with icons support)

License : GPL3

https://github.com/trizen/obmenu-generator https://www.parabola.nu/packages/pcr/x86_64/obmenu-generator/

Thanks

PackagesAnyImplementation RequestVery LowLow[sayonara] add packageUnconfirmed
0%
Task Description

Hello,

I stumbled upon this music player recently, it is very promising and fully free (GPL3)

“Sayonara is a small, clear and fast audio player for Linux written in C++, supported by the Qt framework. It uses GStreamer as audio backend. Sayonara is open source and uses the GPLv3 license. One of Sayonara’s goals is intuitive and easy usablility. Currently, it is only available for Linux and BSD.

Although Sayonara can be considered as a lightweight player, it holds a lot of features in order to organize even big music collections.”

Latest version is 1.1.1 and it is very stable on my hyperbola system. I think it would be a great addition to Hyperbola repo.

https://sayonara-player.com/

A PKGBUILD is available here :

https://sayonara-player.com/sw/arch_linux/PKGBUILD

PackagesAnyImplementation RequestVery LowMedium[foxtrotgps] please add package to reposUnconfirmed
0%
Task Description

Unlike other mapping software (gnome-maps, emerillon) it does not depend on geoclue/geoclue2 (or on kde packages like marble). The package was added to Arch’s official repos over a year ago. Their PKGBUILD builds fine.

PackagesAnyImplementation RequestVery LowMedium[peertube] Add new PackageUnconfirmed
0%
Task Description

Description:

Hi guys. Could they add PeerTube to Hyperbola?

It’s on AUR.

Under the AGPLv3 license

Additional info:

I see that the PeerTube help configuration with an init.d

PackagesAnyImplementation RequestVery LowMedium[purple-matrix] Please add packageUnconfirmed
0%
Task Description

Package is a libpurple plugin for the Matrix protocol which is consistent with Hyperbola’s social contract as Matrix is a federated protocol.

Source code can be found here licensed under GPLv2:

https://github.com/matrix-org/purple-matrix

PKGBUILD for git version is available here (last stable release is from two years ago so git version is probably the best version to use):

https://aur.archlinux.org/packages/purple-matrix-git/

PackagesAnyImplementation RequestVery LowLow[mkv-extractor-qt] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

mkv-extractor-qt

“Graphical MKV demultiplexer”

https://aur.archlinux.org/packages/mkv-extractor-qt/

License: GPL3

Thanks

ServicesHyperWiki/DokuWikiImplementation RequestVery LowMediumProvide binaries for the Ice*-UXP applications in their...Unconfirmed
0%
Task Description

This would ease their usage on other distros.

PackagesAnyImplementation RequestVery LowLow[vidcutter] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

vidcutter

“A modern, simple to use, constantly evolving and hella fast MEDIA CUTTER + JOINER w/ frame-accurate SmartCut technology + Qt5, libmpv, FFmpeg and MediaInfo powering the backend.”

License : GPL3

https://aur.archlinux.org/packages/vidcutter/

https://vidcutter.ozmartians.com/

PackagesAnyImplementation RequestVery LowMediumPrivacy Settings for IceapeUnconfirmed
0%
Task Description

This addon works for any firefox based browser but not seamonkey based or this.

I wondered if you could implement the iceweasel one for Iceape.

Showing tasks 401 - 450 of 512 Page 9 of 11<<First - 7 - 8 - 9 - 10 - 11 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing