All Projects

Project  ascCategoryTask TypePrioritySeveritySummaryStatusProgress
PackagesAnyImplementation RequestVery LowLow[chdkptp] please add package to reposUnconfirmed
0%
Task Description

CHDKPTP is part of CHDK project - a free software firmware add-on for Canon cameras. It enables controlling Canon cameras via the computer.

Attached is a modified iup PKGBUILD (Lua 5.3 build was removed as it failed to compile) and configuration files for chdkptp.

Code is available via svn:

$ svn co http://subversion.assembla.com/svn/chdkptp/trunk chdkptp

Copy chdkptp.sh and config.mk files to source tree then compile via make. Requires root privileges to connect to a camera.

PackagesStableSecurity IssueVery LowMedium[git] Multiple CVEsUnconfirmed
0%
Task Description

CVE-2020-5260 has been fixed very recently in Debian, so I thought I would apply this patch. However, I found out that security patches have not been applied for quite a while (I could account for at least 6 CVEs).

Considering that the version in Debian stretch (2.11.0) is the nearest version with security patches released by Debian and that git project oldest supported version is 2.17, I have used patches from Debian stretch to apply on 2.12.2 currently in Milky Way.

But I have the following error on check():

 |  *** prove ***
 |
 |  Test Summary Report
 |  -------------------
 |  t5570-git-daemon.sh                              (Wstat: 256 Tests: 20 Failed: 10)
 |    Failed tests:  3-7, 15-19
 |    Non-zero exit status: 1
 |  t5811-proto-disable-git.sh                       (Wstat: 256 Tests: 26 Failed: 16)
 |    Failed tests:  2-6, 9-11, 15-19, 21-23
 |    Non-zero exit status: 1
 |  Files=769, Tests=14137, 1101 wallclock secs ( 8.08 usr  1.12 sys + 144.48 cusr 63.42 csys = 217.10 CPU)
 |  Result: FAIL
 |  make[1]: *** [Makefile:45: prove] Error 1
 |  make[1]: Leaving directory '/build/git/src/git-2.12.2/t'
 |  make: *** [Makefile:2291: test] Error 2
 |  ==> ERROR: A failure occurred in check().
 |      Aborting...

This does not seem to be related to my change as the current version in Milky Way produces the same error (IOW the package currently in Milky Way is not rebuidable).

PackagesStableBug ReportVery LowCritical[gtk-2] Severe problems with GTK2-applicationsUnconfirmed
0%
Task Description

Description: Since the migration to xenocara there seems to be a bug with applications using GTK-2. From time to time there are crashes with assertion `!xcb_xlib_threads_sequence_lost’.

Looking into this a little bit more deep there are also other distributions affected and this is an upstream-bug. But the concrete situation is not that easy, while it could be also part of the library libX11 itself. Looking therefore here: https://bugs.launchpad.net/ubuntu/+source/pcmanfm/+bug/1782984

Affected are for example LXDE in general, icedove, iceweasel and many more!

PackagesStableFreedom IssueVery LowCritical[keybase] Complete removal of toolUnconfirmed
0%
Task Description

There is only the source code of the client available and since years nothing more happened. With keybase joining “Zoom” nothing more seems to happen. Look also here in the forum: https://forums.hyperbola.info/viewtopic.php?id=368

PackagesAnyImplementation RequestMediumMedium[uzem][uzebox] add uzem emulator and uzebox firmware pa...Assigned
0%
Task Description

Add “uzem” emulator and “uzebox” firmware packages[0][1].

It’s a emulator and firmware for fully free 8bit game console.

[0]:http://belogic.com/uzebox/index.asp (no https found)
[1]:https://github.com/Uzebox/uzebox

PackagesAnyImplementation RequestLowLow[nut] add Network UPS Tools 2.7.x packageAssigned
0%
Task Description

Add “nut” package.

Useful for uninterruptible power supplies, power distribution units, solar controllers and servers power supply units.

PackagesAnyBug ReportLowMedium[cryptsetup] when dmcrypt start, the "/" filesystem, m...Assigned
0%
Task Description

When dmcrypt service start, the “/” filesystem is remounted, mtab is updated and bootmisc is recording the login users, by waiting time scheduling:

* root: waiting for dmcrypt (50 seconds)
* root: timed out waiting for dmcrypt
* Remounting root filesystem read/write ...
* Remounting filesystems ...
* mtab: waiting for dmcrypt (50 seconds)
* mtab: timed out waiting for dmcrypt
* Updating /etc/mtab ...
* Creating mtab symbolic link
* bootmisc: waiting to dmcrypt (50 seconds)
* bootmisc: timed out waiting for dmcrypt
* Creating user login records ...

These features on dmcrypt service are useless and these lines print above filesystem passphrase order (the printed line), those ones break printed console and print the pressed keyboard digit when I’m setting up password.
Sometimes this breaks services startup, and I need press “enter” consecutively to allow run the services.

PackagesAnyBug ReportLowMedium[cryptsetup] can't umount luks filesystem on reboot/shu...Assigned
0%
Task Description

dmcrypt service can’t umount luks filesystem on reboot/shutdown, device or resource busy:

* Removing dm-crypt mappings
* foobar-pv
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
Device foobar-pv is still in use                                              [ !! ]
PackagesAnyFeature RequestMediumMedium[DCPT500W] possible integration of drivers to cups on P...Assigned
0%
Task Description

Hi guys, I have ever run into a Brother brand printer model DCPT500W[0], and I have seen that the source code for the drivers under GPLv3 license is available.

I also see that there is a file brother_dcpt500w_printer_en.ppd, which is important for cups, which is why it may be necessary to integrate it into the cups, as long as the drivers are Libre.

[0]:https://download.brother.com/welcome/dlf101963/dcpt500w_cupswrapper_GPL_source_3.0.2-0.tar.gz

PackagesAnyUpdate RequestMediumMedium[cups] update requestAssigned
0%
Task Description

New versión v2.2.7

References:

PackagesAnyBug ReportVery LowLow[gimp] [gegl] Module '/usr/lib/gegl-0.3/lens-correct.so...Assigned
0%
Task Description

admin→ gimp IMG_20170909_153350828.jpg
GEGL-Message: Module ‘/usr/lib/gegl-0.3/lens-correct.so’ load error: liblensfun.so.1: cannot open shared object file: No such file or directory
GEGL-Message: Module ‘/usr/lib/gegl-0.3/matting-levin.so’ load error: libumfpack.so.5: cannot open shared object file: No such file or directory

(gimp:12519): GLib-GObject-WARNING **: g_object_set_valist: object class ‘GeglConfig’ has no property named ‘cache-size’

Those are errors I get when running Gimp.

PackagesAnyImplementation RequestVery LowMedium[gitea] self-hosted git service Assigned
0%
Task Description

Description:

A nice Git service would be welcomed in our pacman.

- https://github.com/go-gitea/gitea

- https://www.archlinux.org/packages/community/x86_64/gitea/

PackagesStableBug ReportVery LowVery LowGajim "Unable to run gpg - it may not be available" Assigned
0%
Task Description

Description:

Gajim XMPP Client wont start after installing python2-gnupg.

Additional info:
* package version(s)

  community/python2-gnupg 0.4.0-2
  extra/gajim 0.16.8-1.hyperbola2

* config and/or log files etc.

/usr/lib/python2.7/site-packages/gajim/common/gajim.py

Steps to reproduce:

With Gajim working is not possible to assign an OpenPGP key because it needs a wrapper. Therefore python2-gnupgp package is needed. But after installing python2-gnupgp, Gajim doesn’t start. The following output is displayed from the console:


07/21/2018 18:00:41 (E) gajim.c.gnupg Unable to run gpg - it may not be available.
Traceback (most recent call last):

File "/usr/lib/python2.7/site-packages/gnupg.py", line 757, in __init__
  p = self._open_subprocess(["--version"])
File "/usr/lib/python2.7/site-packages/gnupg.py", line 832, in _open_subprocess
  startupinfo=si)
File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
  errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
  raise child_exception

OSError: [Errno 2] No such file or directory
Traceback (most recent call last):

File "gajim.py", line 513, in <module>
  interface.run()
File "/usr/lib/python2.7/site-packages/gajim/gui_interface.py", line 2704, in run
  self.roster = roster_window.RosterWindow()
File "/usr/lib/python2.7/site-packages/gajim/roster_window.py", line 6611, in __init__
  connection_zeroconf.ConnectionZeroconf(gajim.ZEROCONF_ACC_NAME)
File "/usr/lib/python2.7/site-packages/gajim/common/zeroconf/connection_zeroconf.py", line 68, in __init__
  CommonConnection.__init__(self, name)
File "/usr/lib/python2.7/site-packages/gajim/common/connection.py", line 150, in __init__
  self.gpg = gpg.GnuPG()
File "/usr/lib/python2.7/site-packages/gajim/common/gpg.py", line 37, in __init__
  gnupg.GPG.__init__(self, gpgbinary=gajim.GPG_BINARY, use_agent=use_agent)
File "/usr/lib/python2.7/site-packages/gnupg.py", line 761, in __init__
  raise OSError(msg)

OSError: Unable to run gpg - it may not be available.


After doing some search, the issue is that gajim.py is trying to call ‘gpg’ as ‘gpg1’.

# grep -n GPG_BINARY /usr/lib/python2.7/site-packages/gajim/common/gajim.py
162:GPG_BINARY = ‘gpg1’

By replacing ‘gpg’ instead of ‘gpg1’, Gajim will start normally with OpenPGP feature available.

Maybe a newer revision of python2-gnupg is required or maybe a small patch in the current package.

PackagesAnyFeature RequestVery LowMediumRemove dependency of packages on pulseaudio/libpulseAssigned
0%
Task Description

Similar to systemd, pulseaudio or libpulse is forced upon users as many packages require it such as kodi, gnome-shell (and thus also gdm), ffmpeg, gst-plugins-good, simplescreenrecorder, clementine, empathy, seamonkey (iceape), fluidsynth, mumble and qemu, Most/all of these packages can probably be compiled with pulseaudio or libpulse as an optional dependency instead.

PackagesAnyFeature RequestVery HighHigh[onioncat] needs OpenRC init scriptAssigned
0%
Task Description

Description:

  • needs OpenRC init script

Additional info:

  • onioncat 0.2.2.r578-1

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[umurmur] needs OpenRC init script and contains systemd...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd file

Additional info:

  • umurmur 0.2.16_a-6
umurmur /usr/lib/systemd/system/umurmur.service

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[prosody] needs OpenRC init script and contains systemd...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd files

Additional info:

  • prosody 1:0.10.r7198+.2fd20f372cb1+-2
prosody /usr/lib/systemd/system/prosody.service
prosody /usr/lib/sysusers.d/prosody.conf
prosody /usr/lib/tmpfiles.d/prosody.conf

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[unrealircd] needs OpenRC init script and contains syst...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd files

Additional info:

  • unrealircd 4.0.11-2
unrealircd /usr/lib/systemd/system/unrealircd.service
unrealircd /usr/lib/tmpfiles.d/unrealircd.conf

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[mcelog] needs OpenRC init script and contains systemd ...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd file

Additional info:

  • mcelog 1:148-1
mcelog /usr/lib/systemd/system/mcelog.service

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[bzr] needs OpenRC init script (bzr serve)Assigned
0%
Task Description

Description:

  • needs OpenRC init script (bzr serve), like [git] (git-daemon) and [subversion] (svnserve)

Additional info:

  • bzr 2.7.0-2
Note: needs a provide: bazaar

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[mercurial] needs OpenRC init scripts (hg serve and chg...Assigned
0%
Task Description

Description:

  • needs OpenRC init scripts (hg serve and chg server), like [git] (git-daemon) and [subversion] (svnserve)

Additional info:

  • mercurial 4.2-1
Note: needs a provide: hg

Steps to reproduce:

  • none
PackagesAnySecurity IssueVery LowMedium[patch] CVE-2018-6951 - NULL pointer DoSAssigned
0%
Task Description

An issue was discovered in GNU patch through 2.7.6. There is a segmentation fault, associated with a NULL pointer dereference, leading to a denial of service in the intuit_diff_type function in pch.c, aka a “mangled rename” issue.

https://security-tracker.debian.org/tracker/CVE-2018-6951

PackagesAnyBackport RequestVery LowVery LowIcetray for Iceape-uxpAssigned
0%
Task Description

This already works for it, but I just thought I would request it to be put in.

PackagesStableBug ReportVery LowHigh[devede] xorriso unsupported option '-dvd-video'Assigned
0%
Task Description

Description:

Devede fails to convert transcoded videos to iso format with libburn-1.5.0.

Drive current: -outdev 'stdio:/home/heckyel/movie/movie.iso'
Media current: stdio file, overwriteable
Media status : is blank
Media summary: 0 sessions, 0 data blocks, 0 data,  334g free
xorriso : FAILURE : -as genisofs: Unsupported option '-dvd-video'
xorriso : NOTE : -return_with SORRY 32 triggered by problem severity FAI

Additional info:

$ pacman -Si devede
Repositorio               : community
Nombre                    : devede
Versión                   : 4.8.8-1
Descripción               : A program to create VideoDVDs and CDs
Arquitectura              : any
URL                       : http://www.rastersoft.com/programas/devede.html
Licencias                 : GPL3
Grupos                    : Nada
Provee                    : Nada
Depende de                : mencoder  ffmpeg  dvdauthor  vcdimager  cdrkit  ttf-dejavu
                            gtk3  python-cairo  python-gobject  python-setuptools
Dependencias opcionales   : mplayer
                            vlc
                            mpv
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1640,88 KiB
Tamaño de la instalación  : 3331,00 KiB
Encargado                 : Sergej Pupykin <pupykin.s+arch@gmail.com>
Fecha de creación         : vie 10 feb 2017 05:06:37 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

Link’s code:

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/mkisofs.py#L61

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/genisoimage.py#L61

Steps to reproduce:

- Install devede
- Create video DVD disc

PackagesAnyBug ReportVery LowMedium[clamtk] Gtk-WARNING **: Impossible to find the theme e...Assigned
0%
Task Description

Additional info:
* package version

Repositorio               : community
Nombre                    : clamtk
Versión                   : 5.24-1
Descripción               : Easy to use, light-weight, on-demand virus scanner for Linux
                            systems
Arquitectura              : any
URL                       : https://dave-theunsub.github.io/clamtk/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : clamav  perl  gtk2-perl  perl-locale-gettext  perl-libwww
                            perl-http-message  perl-lwp-protocol-https  perl-text-csv
                            perl-json  python  zenity  desktop-file-utils  gnome-icon-theme
                            cron
Dependencias opcionales   : Nada
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 179,90 KiB
Tamaño de la instalación  : 1378,00 KiB
Encargado                 : Levente Polyak <anthraxx@archlinux.org>
Fecha de creación         : sáb 19 nov 2016 20:25:20 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

$ clamtk
Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «clearlooks», at /usr/lib/perl5/vendor_perl/ClamTk/GUI.pm line 35.

Steps to reproduce:

* Install clamtk in all version

PackagesAnyBug ReportVery LowMedium[slim] login screen not displaying correctlyAssigned
0%
Task Description

It worked fine on the previous version of Hyperbola. The word user/username does not show up. A workaround is to wait 10 seconds and enter the username and click enter - then it will switch correctly to the password screen (otherwise you need to enter the username and password at least twice in order to successfully login).

PackagesAnyBug ReportVery LowCritical[system-config-printer] Impossible to print some pdfs (...Assigned
0%
Task Description

Hello,

I’m unable to print some pdfs on my Hyperbola 3.0 system.
Some background :

cups is installed, service enabled and working
system-config-printer is installed and my printer has been correctly added.

I can print most pdfs and text files but recently with a pdf, it fails to print it.* And system-config-printer returned the following error (see capture) :

Printer "EPSON XP-620-Series" requires the '/usr/lib/cups/filters/epson-escpr-wrapper' but it is not currently installed.

Currently, “epson-escpr-wrapper” is installed but it is in :

/usr/libexec/cups/filters/epson-escpr-wrapper

Looking at source code of system-config-printer, it expects that wrapper to be installed in “/usr/lib/” so I tried to symlink that “epson-escpr-wrapper” to “/usr/lib/cups/filters” but it doesn’t work..

*With a Debian system and the exact same configuration, the “problematic” pdf prints just fine so it is not an issue with the pdf.

PackagesStableFreedom IssueVery LowCritical[elementary-icon-theme] Contains non-FSDG compliant dis...Assigned
0%
Task Description

About that distro, Elementary OS is semi-libre/free, Ubuntu based, long term support, but does not comply with the GNU Free System Distributibution Guidelines (FSDG). To either rebrand or remove existing non-FSDG compliant distro icon files.

The following affected files are present in this list:

  • /usr/share/icons/elementary/places/16/distributor-logo.svg
  • /usr/share/icons/elementary/places/24/distributor-logo.svg
  • /usr/share/icons/elementary/places/32/distributor-logo.svg
  • /usr/share/icons/elementary/places/48/distributor-logo.svg
  • /usr/share/icons/elementary/places/64/distributor-logo.svg
  • /usr/share/icons/elementary/places/128/distributor-logo.svg
  • /usr/share/icons/elementary/places/symbolic/distributor-logo-symbolic.svg
PackagesStableImplementation RequestVery LowHigh[simplescreenrecorder] Malfunctional when not removing ...Assigned
0%
Task Description

Within the last commit regarding the package simplescreenrecorder the interface for pulseaudio was removed. So far, so good. But without the complete removal of pulseaudio the application is enforced to use ALSA emulation for PulseAudio on systems with libpulse installed and that usually only makes things worse.

Please undo this for version 0.3 until the removal of pulseaudio is complete.

PackagesStableFreedom IssueVery LowCritical[conky] Some serious issuesAssigned
90%
Task Description

I’m writing here about the package Conky. It is the useful widget of system monitor into your desktop, but there are some serious issues:

Config variables

  • distribution outputs the string “Arch Linux” instead of “Hyperbola GNU/Linux-libre”.
  • eve requires users to use API for non-libre/free video game EVE Online, and should be removed.
  • All Beep Media Player (BMPx) related variables (including bmpx_album, bmpx_artist, bmpx_bitrate, bmpx_title, bmpx_track and bmpx_uri) are obselete and useless, and should be removed because the package BMPx isn’t present on Arch and Hyperbola official repositories but Arch User Repository (AUR).
  • [For Milky Way version 0.4.x only] All PulseAudio related variables (including if_pa_sink_muted, pa_sink_volume, pa_sink_volumebar, pa_sink_description, pa_card_name and pa_card_active_profile) are no longer used, and should be removed due replaced the default audio server with sndio.

Manual

  • Contains non-FDSG compliant distros.
  • Contains vague terminology.
  • Requires users to use API for non-libre/free weather network service(s) (including The Weather Channel).
PackagesAnyImplementation RequestVery LowLow[emacs-exwm] add packageAssigned
0%
Task Description

Some users use emacs as a tiling window manager. Please add EXWM[0]

[0]: https://github.com/ch11ng/exwm

PackagesAnyImplementation RequestVery LowLow[SafeEyes] add new packageAssigned
0%
Task Description

Safe Eyes is a program to manage breaks in front of the computer. It has many features that help us adapt it to our needs.

PackagesStableFeature RequestMediumHigh[ntfs-3g] require FHSAssigned
0%
Task Description

Description:

ntfs-3g needs FHS adaptation

Additional info:
* package version(s)

2017.3.23-1

* config and/or log files etc.

$ pacman -Ql ntfs-3g
ntfs-3g /usr/
ntfs-3g /usr/bin/
ntfs-3g /usr/bin/lowntfs-3g
ntfs-3g /usr/bin/mkfs.ntfs
ntfs-3g /usr/bin/mkntfs
ntfs-3g /usr/bin/mount.lowntfs-3g
ntfs-3g /usr/bin/mount.ntfs
ntfs-3g /usr/bin/mount.ntfs-3g
ntfs-3g /usr/bin/ntfs-3g
ntfs-3g /usr/bin/ntfs-3g.probe
ntfs-3g /usr/bin/ntfscat
ntfs-3g /usr/bin/ntfsclone
ntfs-3g /usr/bin/ntfscluster
ntfs-3g /usr/bin/ntfscmp
ntfs-3g /usr/bin/ntfscp
ntfs-3g /usr/bin/ntfsfix
ntfs-3g /usr/bin/ntfsinfo
ntfs-3g /usr/bin/ntfslabel
ntfs-3g /usr/bin/ntfsls
ntfs-3g /usr/bin/ntfsrecover
ntfs-3g /usr/bin/ntfsresize
ntfs-3g /usr/bin/ntfssecaudit
ntfs-3g /usr/bin/ntfstruncate
ntfs-3g /usr/bin/ntfsundelete
ntfs-3g /usr/bin/ntfsusermap
ntfs-3g /usr/bin/ntfswipe
ntfs-3g /usr/include/
ntfs-3g /usr/include/ntfs-3g/
ntfs-3g /usr/include/ntfs-3g/acls.h
ntfs-3g /usr/include/ntfs-3g/attrib.h
ntfs-3g /usr/include/ntfs-3g/attrlist.h
ntfs-3g /usr/include/ntfs-3g/bitmap.h
ntfs-3g /usr/include/ntfs-3g/bootsect.h
ntfs-3g /usr/include/ntfs-3g/cache.h
ntfs-3g /usr/include/ntfs-3g/collate.h
ntfs-3g /usr/include/ntfs-3g/compat.h
ntfs-3g /usr/include/ntfs-3g/compress.h
ntfs-3g /usr/include/ntfs-3g/debug.h
ntfs-3g /usr/include/ntfs-3g/device.h
ntfs-3g /usr/include/ntfs-3g/device_io.h
ntfs-3g /usr/include/ntfs-3g/dir.h
ntfs-3g /usr/include/ntfs-3g/ea.h
ntfs-3g /usr/include/ntfs-3g/efs.h
ntfs-3g /usr/include/ntfs-3g/endians.h
ntfs-3g /usr/include/ntfs-3g/index.h
ntfs-3g /usr/include/ntfs-3g/inode.h
ntfs-3g /usr/include/ntfs-3g/ioctl.h
ntfs-3g /usr/include/ntfs-3g/layout.h
ntfs-3g /usr/include/ntfs-3g/lcnalloc.h
ntfs-3g /usr/include/ntfs-3g/logfile.h
ntfs-3g /usr/include/ntfs-3g/logging.h
ntfs-3g /usr/include/ntfs-3g/mft.h
ntfs-3g /usr/include/ntfs-3g/misc.h
ntfs-3g /usr/include/ntfs-3g/mst.h
ntfs-3g /usr/include/ntfs-3g/ntfstime.h
ntfs-3g /usr/include/ntfs-3g/object_id.h
ntfs-3g /usr/include/ntfs-3g/param.h
ntfs-3g /usr/include/ntfs-3g/plugin.h
ntfs-3g /usr/include/ntfs-3g/realpath.h
ntfs-3g /usr/include/ntfs-3g/reparse.h
ntfs-3g /usr/include/ntfs-3g/runlist.h
ntfs-3g /usr/include/ntfs-3g/security.h
ntfs-3g /usr/include/ntfs-3g/support.h
ntfs-3g /usr/include/ntfs-3g/types.h
ntfs-3g /usr/include/ntfs-3g/unistr.h
ntfs-3g /usr/include/ntfs-3g/volume.h
ntfs-3g /usr/include/ntfs-3g/xattrs.h
ntfs-3g /usr/lib/
ntfs-3g /usr/lib/libntfs-3g.so
ntfs-3g /usr/lib/libntfs-3g.so.88
ntfs-3g /usr/lib/libntfs-3g.so.88.0.0
ntfs-3g /usr/lib/ntfs-3g/
ntfs-3g /usr/lib/pkgconfig/
ntfs-3g /usr/lib/pkgconfig/libntfs-3g.pc
ntfs-3g /usr/share/
ntfs-3g /usr/share/doc/
ntfs-3g /usr/share/doc/ntfs-3g/
ntfs-3g /usr/share/doc/ntfs-3g/README
ntfs-3g /usr/share/man/
ntfs-3g /usr/share/man/man8/
ntfs-3g /usr/share/man/man8/mkfs.ntfs.8.gz
ntfs-3g /usr/share/man/man8/mkntfs.8.gz
ntfs-3g /usr/share/man/man8/mount.lowntfs-3g.8.gz
ntfs-3g /usr/share/man/man8/mount.ntfs-3g.8.gz
ntfs-3g /usr/share/man/man8/ntfs-3g.8.gz
ntfs-3g /usr/share/man/man8/ntfs-3g.probe.8.gz
ntfs-3g /usr/share/man/man8/ntfscat.8.gz
ntfs-3g /usr/share/man/man8/ntfsclone.8.gz
ntfs-3g /usr/share/man/man8/ntfscluster.8.gz
ntfs-3g /usr/share/man/man8/ntfscmp.8.gz
ntfs-3g /usr/share/man/man8/ntfscp.8.gz
ntfs-3g /usr/share/man/man8/ntfsdecrypt.8.gz
ntfs-3g /usr/share/man/man8/ntfsfallocate.8.gz
ntfs-3g /usr/share/man/man8/ntfsfix.8.gz
ntfs-3g /usr/share/man/man8/ntfsinfo.8.gz
ntfs-3g /usr/share/man/man8/ntfslabel.8.gz
ntfs-3g /usr/share/man/man8/ntfsls.8.gz
ntfs-3g /usr/share/man/man8/ntfsprogs.8.gz
ntfs-3g /usr/share/man/man8/ntfsrecover.8.gz
ntfs-3g /usr/share/man/man8/ntfsresize.8.gz
ntfs-3g /usr/share/man/man8/ntfssecaudit.8.gz
ntfs-3g /usr/share/man/man8/ntfstruncate.8.gz
ntfs-3g /usr/share/man/man8/ntfsundelete.8.gz
ntfs-3g /usr/share/man/man8/ntfsusermap.8.gz
ntfs-3g /usr/share/man/man8/ntfswipe.8.gz
PackagesAnyPrivacy IssueVery LowCritical[bleachbit] needs to be adapted to UXP applicationsAssigned
0%
Task Description

The current version of BleachBit needs to be adapted so it can clean the new .cache/hyperbola/ directory.

PackagesAnyBug ReportMediumMedium[rxvt-unicode] rc-status command print "bug" tableResearching
0%
Task Description

If you do a command line rc-status on urxvt terminal, the name of the column of services are hidden. You will only see the status columns. Example:

Runlevel: default
  started  ]
  started  ]
  started  ]
  started  ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
Dynamic Runlevel: hotplugged
Dynamic Runlevel: needed/wanted
  started  ]
  started  ]
  started  ]d
Dynamic Runlevel: manual
PackagesAnyFeature RequestMediumMedium[epiphany] restore the hidden setting to disable JavaSc...Researching
0%
Task Description

Please restore the hidden setting (which can be enabled via dconf-editor) to disable JavaScript, which was removed last year (see here for details: https://github.com/GNOME/epiphany/blob/master/NEWS ).
Please do not remove the browser from the repos, as it renders this website correctly, unlike Mozlla based browsers (see here for more info: https://issues.hyperbola.info/index.php?do=details&task_id=131). The browser also provides other functions currently unavailable in Mozilla browsers, such as accessing LibreCMC router’s non-SSL web interface.

PackagesAnyFeature RequestMediumLow[cinnamon] add elogind supportResearching
0%
Task Description

Cinnamon currently does not support elogind, and depends on systemd. A patch is needed to fix this issue.

PackagesStableBug ReportMediumMedium[libusb] error when mounting USB memories on virtual ma...Researching
0%
Task Description

## Bug ##

libusb: error [_get_usbfs_fd] libusb couldn’t open USB device /dev/bus/usb/003/003: permission denied libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.

Reference links: https://askubuntu.com/questions/526962/libusb-couldnt-open-usb-device-dev-bus-usb-002-006-permission-denied-libusb

PackagesTestingBug ReportMediumMedium[emacs] crush after swayResearching
0%
Task Description

I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:

1. Run sway
2. Exit sway or killall sway
3. Try running emacs on console, there will be crush
4. log out, log in, and emacs will work on console again

Yet it should not crush.

PackagesAnyFeature RequestVery HighHigh[backuppc]: contains systemd filesResearching
0%
Task Description

Description:

Since Hyperbola follows the Init Freedom Campaign, systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)

community/backuppc 4.1.2-1 [installed]

   Enterprise-grade system for backing up Linux, Windows and MacOS PCs

* config and/or log files etc.

Additional info:

Steps to reproduce: install it

PackagesAnyFeature RequestVery HighHigh[gpsd]: contains systemd filesResearching
0%
Task Description

Since Hyperbola follows the Init Freedom Campaign, systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)

extra/gpsd 3.16-3 [installed]

   GPS daemon and library to support USB/serial GPS devices

* config and/or log files etc.

Additional info:

Steps to reproduce: install it

PackagesAnySecurity IssueMediumMedium[openssh] CVE-2018-15919Researching
0%
Task Description

Remotely observable behavior in auth-gss2.c in OpenSSH through 7.8 could be used by remote attackers to detect existence of users on a target system when GSS2 is in use. NOTE: the discoverer states ‘We understand that the OpenSSH developers do not want to treat such a username enumeration (or “oracle”) as a vulnerability.’ https://security-tracker.debian.org/tracker/CVE-2018-15919

PackagesStableFeature RequestVery HighHigh[hiawatha]: remove systemd files, provide openrcResearching
0%
Task Description

Description:

Hiawatha contains only systemd files.

It shall be removed and openrc shall be provided

PackagesAnyBug ReportVery LowLow[zathura-pdf-poppler] unable to process apostrophes di...Researching
0%
Task Description

Description:
Something is wrong with the latest version packaged in Hyperbola. zathura-pdf-poppler is unable to process apostrophes displayed in pdf bookmarks.

Steps to reproduce:
Open any pdf file which has a summary included, then hit `Tab` to display the summary. Instead of apostrophes, zathura-pdf-poppler displays html entities while the output of zathura-pdf-mupdf is correct.

PackagesAnyDrop RequestMediumMedium[gksu] is replaced and has to be deleted from our pacma...Researching
0%
Task Description

Description:
From the author’s webpage gksu has been replaced.

Additional info:
* package version(s) : extra/gksu 2.0.2-5

http://www.nongnu.org/gksu/

PackagesAnyBug ReportLowLow[crystal] error build InvidiousResearching
0%
Task Description

Description:

crystal build src/invidious.cr –release

Error in src/invidious.cr:19: while requiring "kemal"

require "kemal"
^

in lib/kemal/src/kemal.cr:4: while requiring "./kemal/*"

require "./kemal/*"
^

in lib/kemal/src/kemal/config.cr:26: expanding macro

    property static_headers : (HTTP::Server::Response, String, File::Info -> Void)?
    ^~~~~~~~

in lib/kemal/src/kemal/config.cr:26: expanding macro

    property static_headers : (HTTP::Server::Response, String, File::Info -> Void)?
    ^

in macro 'property' expanded macro: macro_48177600:567, line 4:

   1.       
   2.         
   3.           
>  4.             @static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil
   5. 
   6.             def static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil
   7.               @static_headers
   8.             end
   9. 
  10.             def static_headers=(@static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil)
  11.             end
  12.           
  13.         
  14.       
  15.     

undefined constant File::Info

Additional info:
* package version(s)

Crystal 0.22.0 (2017-04-22) LLVM 4.0.0

Steps to reproduce:

PackagesAnyPrivacy IssueVery LowLow[github] check github-related packagesResearching
0%
Task Description

We should check if the following packages run any non-free JS (like youtube-dl) or access a proprietary API:

- hub
- python-pygithub
- python2-pygithub

I haven’t check them, but they look fishy. Take it as a reminder, this is far from being urgent IMO.

PackagesAnyBug ReportMediumHigh[notmuch-mutt] missing requirementResearching
0%
Task Description

Description:
notmuch-mutt fails to compile without perl-mail-message which is missing in Hyperbola

Steps to reproduce:
Install notmuch-mutt and try `notmuch-mutt` at the command line. Then install `perl-mail-message` from Arch and try again.

PackagesAnyImplementation RequestLowLow[opmsg] add new packageResearching
0%
Task Description

Description: opmsg is a replacement for gpg which can encrypt/sign/verify your mails or create/verify detached signatures of local files. Even though the opmsg output looks similar, the concept is entirely different.

Additional info:
https://aur.archlinux.org/packages/opmsg/

PackagesStableBug ReportVery LowLowChemical uknown media typesResearching
50%
Task Description

I do not know how to solve this. Some of packages is causing this problem. I do not know which one.

Description:

(4/4) Updating the MIME type database...
Unknown media type in type ‘chemical/x-alchemy’ Unknown media type in type ‘chemical/x-cache’ Unknown media type in type ‘chemical/x-cactvs-ascii’ Unknown media type in type ‘chemical/x-cactvs-binary’ Unknown media type in type ‘chemical/x-cactvs-table’ Unknown media type in type ‘chemical/x-cdx’ Unknown media type in type ‘chemical/x-cdxml’ Unknown media type in type ‘chemical/x-chem3d’ Unknown media type in type ‘chemical/x-cif’ Unknown media type in type ‘chemical/x-cml’ Unknown media type in type ‘chemical/x-daylight-smiles’ Unknown media type in type ‘chemical/x-dmol’ Unknown media type in type ‘chemical/x-gamess-input’ Unknown media type in type ‘chemical/x-gamess-output’ Unknown media type in type ‘chemical/x-gaussian-input’ Unknown media type in type ‘chemical/x-gaussian-log’ Unknown media type in type ‘chemical/x-genbank’ Unknown media type in type ‘chemical/x-gulp’ Unknown media type in type ‘chemical/x-hin’ Unknown media type in type ‘chemical/x-inchi’ Unknown media type in type ‘chemical/x-inchi-xml’ Unknown media type in type ‘chemical/x-jcamp-dx’ Unknown media type in type ‘chemical/x-macromodel-input’ Unknown media type in type ‘chemical/x-mdl-molfile’ Unknown media type in type ‘chemical/x-mdl-rdfile’ Unknown media type in type ‘chemical/x-mdl-rxnfile’ Unknown media type in type ‘chemical/x-mdl-sdfile’ Unknown media type in type ‘chemical/x-mdl-tgf’ Unknown media type in type ‘chemical/x-mmcif’ Unknown media type in type ‘chemical/x-mol2’ Unknown media type in type ‘chemical/x-mopac-graph’ Unknown media type in type ‘chemical/x-mopac-input’ Unknown media type in type ‘chemical/x-mopac-out’ Unknown media type in type ‘chemical/x-msi-car’ Unknown media type in type ‘chemical/x-msi-hessian’ Unknown media type in type ‘chemical/x-msi-mdf’ Unknown media type in type ‘chemical/x-msi-msi’ Unknown media type in type ‘chemical/x-ncbi-asn1’ Unknown media type in type ‘chemical/x-ncbi-asn1-binary’ Unknown media type in type ‘chemical/x-ncbi-asn1-xml’ Unknown media type in type ‘chemical/x-pdb’ Unknown media type in type ‘chemical/x-shelx’ Unknown media type in type ‘chemical/x-vmd’ Unknown media type in type ‘chemical/x-xyz’ Unknown media type in type ‘all/all’ Unknown media type in type ‘all/allfiles’

Showing tasks 251 - 300 of 484 Page 6 of 10<<First - 4 - 5 - 6 - 7 - 8 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing