All Projects

ProjectCategory  ascTask TypePrioritySeveritySummaryStatusProgress
Software DevelopmentGeneralImplementation RequestDeferCriticalRISC-V (riscv64) porting + multilib supportDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and RISC-V promises to be a great architecture example for low-power computers, laptops and embedded systems, also as ARM architecture replacement.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the RISC-V architecture (riscv64) with multilib support.

NOTE: RISC-V porting is focused only for Hyperbola GNU/Linux-libre .

InstallationGeneralFeature RequestVery LowLow[calamares] add graphical installer with FDE supportResearching
0%
Task Description

Package Request: https://github.com/calamares/calamares

Original Bug Report:
— I would also like to test the beta isos when they are ready through qemu. If it looks good I plan to fully install them onto my laptop. My libreboot x200.

I don’t know if I should make a separate feature for this, but xfce is a good stable desktop environment for such a choice. that and lxde.

Though lxde is going to die...

InstallationGeneralImplementation RequestVery LowLowTo make installation instructions and get use of live I...Unconfirmed
0%
Task Description

I have installed multiple times Hyperbola, 4 times on 4 different notebooks.

What I have noticed is that the live ISO is quite huge in relation to the task that should be done. Namely. the live ISO shall at least contain some first packages, so that they do not need to be downloaded online.

Best would be if the live ISO can be copied straight and that system can run from ISO/DVD without having Internet. At least one simple graphical environment shall be included.

Further, I have noticed that there is only network instructions as HTML file.

I would rather call it installation-instructions.html to make it clear for people what it is. Or simply: INSTALL.html so that people understand what it is.

It says just network.html if I remember well.

Then there is absolutely no point or link or reference to the installation instructions.

Each time I got a network I had to go to either duckduckgo search engine or to hyperbola.info website and then I tried with lynx to find installation instructions.

It is not straight, not quite clearly in open, it is in Wiki, but that is quite hard to find.

We have to put ourselves in the shoes of those in need of free software. Millions of people need free software.

Many of us live in a developed western countries.

Yet millions of people in need of this software live in South America, Africa, Asia, Eastern Europe.

There are millions of students that could advance their study, and that could progress faster with free software.

In those countries Internet is often non-existent, universities may be located in poor network areas, Internet is being fetched by using mobile phones.

So if there is a live distribution, such shall at least contain basic software, which really can fit onto any DVD, and that as such can be copied on the computer without using Internet. Upgrades could be fetched by using Internet.

And there shall be clear reference, link or file about installation. There shall be no need to go to Internet to install the software.

InstallationGeneralFeature RequestVery LowLow[FAQ]Please note that not all RAR archives are supporte...Unconfirmed
0%
Task Description

I tried to extract a RAR v5 archive using unar that works fine when using the non-free unrar.

Here is the log (with the file name altered)

$ unar file.part1.rar
file.part1.rar: RAR 5

file.mp4  (-2144860915 B)... Failed! (Attempted to read more data than was available)

Extraction to current directory failed! (1 file failed.)

Please add in the FAQ that newer RAR archives (version 5) may not work when using unar.

ServicesGeneralFeature RequestVery LowLowhyperbola branding - add guidelines to packagesUnconfirmed
0%
Task Description

I could not find any regarding using arch or other branded themes. Parabola apparently rebrands some stuff in their libre repository, eg. they have their own parabola-themes-slim package for slim based themes.

https://issues.hyperbola.info/index.php?do=details&task_id=1213&opened=24&status[0]=

InstallationGeneralFreedom IssueVery LowHigh[openbox] provides nonfree software support in the menuUnconfirmed
0%
Task Description

my recommended fix, make it reflect the applications that are actually installed on the system after removing non-free software support.

InstallationGeneralFreedom IssueVery LowLow[jwm] provides nonfree software support in the menu Unconfirmed
0%
Task Description

my recommended fix, make it reflect the applications that are actually installed on the system after removing non-free software support.

InstallationGeneralFreedom IssueVery LowHighFS#1445 - [fluxbox] provides nonfree software support i...Unconfirmed
0%
Task Description

recommended fix, remove non-free software entries in menu and replace them with applications that actually exist.

Software DevelopmentHyperBKImplementation RequestVery HighCriticalDevelop a BSD descendant kernel for HyperbolaBSDIn Progress
30%
Task Description

Develop HyperBK (Hyper Berkeley Kernel), a BSD descendant kernel with GPL-compatible licenses preserved, non-compatible ones removed, and new code written under GPL-3 for HyperbolaBSD.

TODO:

  • Download OpenBSD kernel source code from OpenBSD siteDONE
  • Download LibertyBSD scripts to deblob and rebrand kernel from their scripts. → DONE
  • Push source to HyperBK’s project. → DONE
  • Rebrand OpenBSD kernel to HyperbolaBSD with LibertyBSD scripts. → DONE
  • Rebrand entire code (functions, variable, pointers, etc) under HyperbolaBSD → DONE
  • Remove files under non GPL-compatible licenses → DONE
  • Import code from another BSD systems under GPL-compatible licenses → IN PROGRESS
  • Write new code under GPL-3 → IN PROGRESS
  • Package HyperBK for HyperbolaBSD.

PATCHING NOTE

When the check concerns kernel, we obviously want to match with HyperbolaBSD.

Example of triplet check:	hyperbolabsd)
Example of uname -s check:	HyperbolaBSD)
Example of uname -r check:	0.1)
Example of C macro check:	defined(__HyperbolaBSD__)
Software DevelopmentHyperToolsImplementation RequestLowLow[hypertools] create libretools replacement for Hyperbol...Deferred
0%
Task Description

Create hypertools to replace libretools package for HyperbolaBSD and GNU/Linux

It’s long period to develop this package.
For now, a systemd-nspawn wrapper is being developed for “libretools”[0]

[0]:https://issues.hyperbola.info/index.php?do=details&task_id=86

ServicesHyperWeb IssueBug ReportVery LowLowRSS needs fixingUnconfirmed
0%
Task Description

Seems deleted items reappearing in the Hyperbola feeds since it gives its feed items empty ID string.

ServicesHyperWiki/DokuWikiImplementation RequestMediumMediumLibreboot hardening grub guideUnconfirmed
0%
Task Description

I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,

https://libreboot.org/docs/gnulinux/grub_hardening.html

I wondered if there is anything different that needs to be done to get this part done:

gpg –homedir keys –detach-sign my.initramfs
gpg –homedir keys –detach-sign my.kernel
gpg –homedir keys –detach-sign libreboot_grub.cfg
gpg –homedir keys –detach-sign my.grubtest.cfg

it gives me a bunch of weird errors

ServicesHyperWiki/DokuWikiImplementation RequestVery LowMediumProvide binaries for the Ice*-UXP applications in their...Unconfirmed
0%
Task Description

This would ease their usage on other distros.

Software DevelopmentIcedove-UXPImplementation RequestDeferLowSwiftdove-UXP theme for Icedove-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftdove was a Thunderbird-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since FossaMail may potentially be revived on UXP in the future [0] and Swiftdove contains non-trademarked graphics and logos, we could port Swiftdove to UXP platform as theme for Icedove-UXP.

Software DevelopmentIceweasel-UXPImplementation RequestDeferLowSwiftweasel-UXP theme for Iceweasel-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftweasel was a Firefox-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since there are users encouraging us develop a Palemoon-based application , and Swiftweasel contains non-trademarked graphics and logos, we could port Swiftweasel to UXP platform as theme for Iceweasel-UXP.

Software DevelopmentIceweasel-UXPBackport RequestVery LowMediumRequest browser add-on: New Tab ToolsUnconfirmed
0%
Task Description

Name: New Tab Tools
Version: 81 (compatible Firefox version 52)
Source code: Github
Description: Customize Firefox’s. Tabs Page

https://github.com/darktrojan/newtabtools

https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/

Software DevelopmentIceweasel-UXPBackport RequestVery LowVery LowRequest browser add-on: FireGesturesUnconfirmed
0%
Task Description

Name: FireGestures
Version: 1.11.1 (compatible Firefox version 52)
Source code: Github
Description: A customizable mouse gestures extension which enables to execute various commands and user scripts with six types of gestures.

https://github.com/gomita/firegestures/

https://addons.mozilla.org/en-US/firefox/addon/firegestures/

ServicesPunBB BrandingBug ReportHighHighForum appearance bugsIn Progress
100%
Task Description

Some forum display errors:

  1. preview button with the orange border.
  1. Error message when logging in gray color making it difficult to read
PackagesStableUpdate RequestHighHigh[qt5] upgrade Qt project to the 5.6 LTS version, requir...Deferred
0%
Task Description

Cannot mix incompatible Qt library (version 0×50800) with this library (version 0×50904)
Aborted

./Nextcloud-2.3.3-x86_64.AppImage: /usr/lib/libQt5Core.so.5: version `Qt_5.9’ not found (required by /tmp/.mount_NextclpprMnG/usr/bin/../lib/libqt5keychain.so.1

These two packages are directly affected by an older qt5...

Could you update all the qt packages to the LTS version available?

PackagesStableBug ReportMediumMedium[linux-libre-lts] [i915] Display freeze : hpd interrupt...Deferred
0%
Task Description

Hello,

I recently acquired a T400 Thinkpad with 1440×900 panel.
On this T400, I installed Hyperbola, just like on my x200 Thinkpad with 1280×800 panel.

Both Thinkpad are running the same Hyperbola installation :

Full disk encryption (with Libreboot) so both Thinkpad are using early KMS (MODULES=”i915” in /etc/mkinitcpio.conf)
Same kernel : linux-libre-lts (4.9.99 at the moment I’m writing this message)
video driver : modesetting
DE : xfce4 with xfwm4

On the Thinkpad x200, everything works great, no issue to report.

On the T400 though, the linux-libre-lts kernel, I’m getting random display freezes, when it happens, this message appears in dmesg :

hpd interrupt storm detected on connector hdmi-a-1

And the display (and sound) freezes for 10 seconds (sometimes more !)

As Hyperbola proposes linux-libre-lts kernel only, I installed latest linux-libre-lts (4.14.40) and linux-libre (4.16.8) from Parabola GNU/Linux repo.

Results :

With 4.14.40 : Same issue as with 4.9.99 kernel from Hyperbola repo.
With 4.16.8 : Issue is not present ! No more freeze !

I’m not sure how to proceed though. Would you be kind enough helping me to find which commit in i915 driver improved the situation ? If we find it, maybe it could be added as a patch to 4.9.x kernel series.
Or maybe it is something else.. I don’t have much experience, I can provide logs if needed.

Thanks for your help

PackagesStableBug ReportVery LowVery Low[spamassassin] has different directory permissions than...Deferred
0%
Task Description

Description:
The /usr/sbin directory in spamassassin has permissions 755
https://git.hyperbola.info:50100/packages/extra.git/tree/spamassassin/PKGBUILD#n88

And ‘filesystem’ sets it to 750
https://git.hyperbola.info:50100/packages/core.git/tree/filesystem/PKGBUILD#n135

So when installing spamassassin, pacman throws a warning

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

Additional info:
* spamassassin 3.4.2-1.hyperbola2

PackagesStableBug ReportVery LowVery Low[postfix] has different directory permissions than 'fil...Deferred
0%
Task Description

Description:
The /usr/sbin directory in postfix has permissions 755
https://git.hyperbola.info:50100/packages/extra.git/tree/postfix/PKGBUILD#n115

And ‘filesystem’ sets it to 750
https://git.hyperbola.info:50100/packages/core.git/tree/filesystem/PKGBUILD#n135

So when installing postfix, pacman throws a warning

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

Additional info:
* postfix-3.2.2-1.hyperbola6

PackagesStableUpdate RequestVery LowCritical[qt5] request for upgradeDeferred
0%
Task Description

I know that upgrading Qt is not a trivial task, but would it be possible to do this anyway? Qt 5.8 has issues that other versions do not have. See for example the discussion here about Projecteur, a very useful tool. Hyperbola seems to be the only Linux distribution unable to run it, just because of Qt 5.8:

https://github.com/jahnf/Projecteur/issues/26

PackagesStableImplementation RequestVery LowMedium[gcc] Renew to version 8 or 9, including multilibDeferred
0%
Task Description

As even the support for GCC 7 is now ending with the release of version 7.5 (https://gcc.gnu.org/ml/gcc/2019-11/msg00099.html) I’d like to propose a renewal of the building-stack - which I think is also needed in time. Also a renewal of the glibc would be good at all!

PackagesStableUpdate RequestLowHigh[pigeonhole] needs to be updated (depends on older vers...In Progress
0%
Task Description

Description:
The pigeonhole package depends on dovecot 2.2.29.1, which is in version 2.3.4.1-2.hyperbola1.backports1 at the moment. Due to this, I can’t use it

Additional info:
* pigeonhole 0.4.18-1

PackagesStableBug ReportMediumHighopensmtpd: permission problemsIn Progress
0%
Task Description

Description:

cat msg | /usr/sbin/sendmail – sendmail: No such file or directorycannot create temporary file /var/spool/smtpd/offline/1572544775.XXXXIqNsFX

Additional info:
* package version: 6.4.2p1-1.hyperbola2.backports1

It is same problem as here:
https://github.com/OpenSMTPD/OpenSMTPD/issues/839

I could solve it with:

sudo chmod g+s /usr/sbin/smtpctl
sudo chmod g+s /usr/sbin/smtpctl

and then

sudo rc-service smtpd start

Even though I think I should not need to start it to use only sendmail.

PackagesStableBug ReportMediumMedium[virt-install] ERROR '_OsVariant' object has no attribu...Requires Testing
100%
Task Description

Trying to create a VM using virt-install (1.4.1-2.hyperbola2)

virt-install --connect qemu:///system \
--name debian \
--ram 1024 \
--disk path=/home/test/debian.img,size=50 \
--vcpus 2 \
--os-type linux \
--os-variant generic \
--network bridge=virbr0 \
--graphics none \
--console pty,target_type=serial \
--location 'http://ftp.nl.debian.org/debian/dists/stretch/main/installer-amd64/' \
--extra-args 'console=ttyS0,115200n8 serial'

This error shows up :
ERROR : ‘_OsVariant’ object has no attribute ‘urldistro’

I can’t create the VM.

PS : Error is not present on Debian Stretch with virt-install 1.4.0-5

Thanks for your help.

PackagesStableBug ReportMediumCritical[torsocks] which: no getcapRequires Testing
90%
Task Description

Current torsocks version is broken.
It returns the following error when attempting to torify application :

which: no getcap
PackagesStableBug ReportMediumMedium[libusb] error when mounting USB memories on virtual ma...Researching
0%
Task Description

## Bug ##

libusb: error [_get_usbfs_fd] libusb couldn’t open USB device /dev/bus/usb/003/003: permission denied libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.

Reference links: https://askubuntu.com/questions/526962/libusb-couldnt-open-usb-device-dev-bus-usb-002-006-permission-denied-libusb

PackagesStableFeature RequestVery HighHigh[hiawatha]: remove systemd files, provide openrcResearching
0%
Task Description

Description:

Hiawatha contains only systemd files.

It shall be removed and openrc shall be provided

PackagesStableBug ReportVery LowLowChemical uknown media typesResearching
50%
Task Description

I do not know how to solve this. Some of packages is causing this problem. I do not know which one.

Description:

(4/4) Updating the MIME type database...
Unknown media type in type ‘chemical/x-alchemy’ Unknown media type in type ‘chemical/x-cache’ Unknown media type in type ‘chemical/x-cactvs-ascii’ Unknown media type in type ‘chemical/x-cactvs-binary’ Unknown media type in type ‘chemical/x-cactvs-table’ Unknown media type in type ‘chemical/x-cdx’ Unknown media type in type ‘chemical/x-cdxml’ Unknown media type in type ‘chemical/x-chem3d’ Unknown media type in type ‘chemical/x-cif’ Unknown media type in type ‘chemical/x-cml’ Unknown media type in type ‘chemical/x-daylight-smiles’ Unknown media type in type ‘chemical/x-dmol’ Unknown media type in type ‘chemical/x-gamess-input’ Unknown media type in type ‘chemical/x-gamess-output’ Unknown media type in type ‘chemical/x-gaussian-input’ Unknown media type in type ‘chemical/x-gaussian-log’ Unknown media type in type ‘chemical/x-genbank’ Unknown media type in type ‘chemical/x-gulp’ Unknown media type in type ‘chemical/x-hin’ Unknown media type in type ‘chemical/x-inchi’ Unknown media type in type ‘chemical/x-inchi-xml’ Unknown media type in type ‘chemical/x-jcamp-dx’ Unknown media type in type ‘chemical/x-macromodel-input’ Unknown media type in type ‘chemical/x-mdl-molfile’ Unknown media type in type ‘chemical/x-mdl-rdfile’ Unknown media type in type ‘chemical/x-mdl-rxnfile’ Unknown media type in type ‘chemical/x-mdl-sdfile’ Unknown media type in type ‘chemical/x-mdl-tgf’ Unknown media type in type ‘chemical/x-mmcif’ Unknown media type in type ‘chemical/x-mol2’ Unknown media type in type ‘chemical/x-mopac-graph’ Unknown media type in type ‘chemical/x-mopac-input’ Unknown media type in type ‘chemical/x-mopac-out’ Unknown media type in type ‘chemical/x-msi-car’ Unknown media type in type ‘chemical/x-msi-hessian’ Unknown media type in type ‘chemical/x-msi-mdf’ Unknown media type in type ‘chemical/x-msi-msi’ Unknown media type in type ‘chemical/x-ncbi-asn1’ Unknown media type in type ‘chemical/x-ncbi-asn1-binary’ Unknown media type in type ‘chemical/x-ncbi-asn1-xml’ Unknown media type in type ‘chemical/x-pdb’ Unknown media type in type ‘chemical/x-shelx’ Unknown media type in type ‘chemical/x-vmd’ Unknown media type in type ‘chemical/x-xyz’ Unknown media type in type ‘all/all’ Unknown media type in type ‘all/allfiles’

PackagesStableBug ReportVery LowVery LowGajim "Unable to run gpg - it may not be available" Assigned
0%
Task Description

Description:

Gajim XMPP Client wont start after installing python2-gnupg.

Additional info:
* package version(s)

  community/python2-gnupg 0.4.0-2
  extra/gajim 0.16.8-1.hyperbola2

* config and/or log files etc.

/usr/lib/python2.7/site-packages/gajim/common/gajim.py

Steps to reproduce:

With Gajim working is not possible to assign an OpenPGP key because it needs a wrapper. Therefore python2-gnupgp package is needed. But after installing python2-gnupgp, Gajim doesn’t start. The following output is displayed from the console:


07/21/2018 18:00:41 (E) gajim.c.gnupg Unable to run gpg - it may not be available.
Traceback (most recent call last):

File "/usr/lib/python2.7/site-packages/gnupg.py", line 757, in __init__
  p = self._open_subprocess(["--version"])
File "/usr/lib/python2.7/site-packages/gnupg.py", line 832, in _open_subprocess
  startupinfo=si)
File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
  errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
  raise child_exception

OSError: [Errno 2] No such file or directory
Traceback (most recent call last):

File "gajim.py", line 513, in <module>
  interface.run()
File "/usr/lib/python2.7/site-packages/gajim/gui_interface.py", line 2704, in run
  self.roster = roster_window.RosterWindow()
File "/usr/lib/python2.7/site-packages/gajim/roster_window.py", line 6611, in __init__
  connection_zeroconf.ConnectionZeroconf(gajim.ZEROCONF_ACC_NAME)
File "/usr/lib/python2.7/site-packages/gajim/common/zeroconf/connection_zeroconf.py", line 68, in __init__
  CommonConnection.__init__(self, name)
File "/usr/lib/python2.7/site-packages/gajim/common/connection.py", line 150, in __init__
  self.gpg = gpg.GnuPG()
File "/usr/lib/python2.7/site-packages/gajim/common/gpg.py", line 37, in __init__
  gnupg.GPG.__init__(self, gpgbinary=gajim.GPG_BINARY, use_agent=use_agent)
File "/usr/lib/python2.7/site-packages/gnupg.py", line 761, in __init__
  raise OSError(msg)

OSError: Unable to run gpg - it may not be available.


After doing some search, the issue is that gajim.py is trying to call ‘gpg’ as ‘gpg1’.

# grep -n GPG_BINARY /usr/lib/python2.7/site-packages/gajim/common/gajim.py
162:GPG_BINARY = ‘gpg1’

By replacing ‘gpg’ instead of ‘gpg1’, Gajim will start normally with OpenPGP feature available.

Maybe a newer revision of python2-gnupg is required or maybe a small patch in the current package.

PackagesStableBug ReportVery LowHigh[devede] xorriso unsupported option '-dvd-video'Assigned
0%
Task Description

Description:

Devede fails to convert transcoded videos to iso format with libburn-1.5.0.

Drive current: -outdev 'stdio:/home/heckyel/movie/movie.iso'
Media current: stdio file, overwriteable
Media status : is blank
Media summary: 0 sessions, 0 data blocks, 0 data,  334g free
xorriso : FAILURE : -as genisofs: Unsupported option '-dvd-video'
xorriso : NOTE : -return_with SORRY 32 triggered by problem severity FAI

Additional info:

$ pacman -Si devede
Repositorio               : community
Nombre                    : devede
Versión                   : 4.8.8-1
Descripción               : A program to create VideoDVDs and CDs
Arquitectura              : any
URL                       : http://www.rastersoft.com/programas/devede.html
Licencias                 : GPL3
Grupos                    : Nada
Provee                    : Nada
Depende de                : mencoder  ffmpeg  dvdauthor  vcdimager  cdrkit  ttf-dejavu
                            gtk3  python-cairo  python-gobject  python-setuptools
Dependencias opcionales   : mplayer
                            vlc
                            mpv
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1640,88 KiB
Tamaño de la instalación  : 3331,00 KiB
Encargado                 : Sergej Pupykin <pupykin.s+arch@gmail.com>
Fecha de creación         : vie 10 feb 2017 05:06:37 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

Link’s code:

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/mkisofs.py#L61

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/genisoimage.py#L61

Steps to reproduce:

- Install devede
- Create video DVD disc

PackagesStableFreedom IssueVery LowCritical[elementary-icon-theme] Contains non-FSDG compliant dis...Assigned
0%
Task Description

About that distro, Elementary OS is semi-libre/free, Ubuntu based, long term support, but does not comply with the GNU Free System Distributibution Guidelines (FSDG). To either rebrand or remove existing non-FSDG compliant distro icon files.

The following affected files are present in this list:

  • /usr/share/icons/elementary/places/16/distributor-logo.svg
  • /usr/share/icons/elementary/places/24/distributor-logo.svg
  • /usr/share/icons/elementary/places/32/distributor-logo.svg
  • /usr/share/icons/elementary/places/48/distributor-logo.svg
  • /usr/share/icons/elementary/places/64/distributor-logo.svg
  • /usr/share/icons/elementary/places/128/distributor-logo.svg
  • /usr/share/icons/elementary/places/symbolic/distributor-logo-symbolic.svg
PackagesStableImplementation RequestVery LowHigh[simplescreenrecorder] Malfunctional when not removing ...Assigned
0%
Task Description

Within the last commit regarding the package simplescreenrecorder the interface for pulseaudio was removed. So far, so good. But without the complete removal of pulseaudio the application is enforced to use ALSA emulation for PulseAudio on systems with libpulse installed and that usually only makes things worse.

Please undo this for version 0.3 until the removal of pulseaudio is complete.

PackagesStableFreedom IssueVery LowCritical[conky] Some serious issuesAssigned
0%
Task Description

I’m writing here about the package Conky. It is the useful widget of system monitor into your desktop, but there are some serious issues:

Config variables

  • distribution outputs the string “Arch Linux” instead of “Hyperbola GNU/Linux-libre”.
  • eve requires users to use API for non-libre/free video game EVE Online, and should be removed.
  • All Beep Media Player (BMPx) related variables (including bmpx_album, bmpx_artist, bmpx_bitrate, bmpx_title, bmpx_track and bmpx_uri) are obselete and useless, and should be removed because the package BMPx isn’t present on Arch and Hyperbola official repositories but Arch User Repository (AUR).
  • [For Milky Way version 0.4.x only] All PulseAudio related variables (including if_pa_sink_muted, pa_sink_volume, pa_sink_volumebar, pa_sink_description, pa_card_name and pa_card_active_profile) are no longer used, and should be removed due replaced the default audio server with sndio.

Manual

  • Contains non-FDSG compliant distros.
  • Contains vague terminology.
  • Requires users to use API for non-libre/free weather network service(s) (including The Weather Channel).
PackagesStableFeature RequestMediumHigh[ntfs-3g] require FHSAssigned
0%
Task Description

Description:

ntfs-3g needs FHS adaptation

Additional info:
* package version(s)

2017.3.23-1

* config and/or log files etc.

$ pacman -Ql ntfs-3g
ntfs-3g /usr/
ntfs-3g /usr/bin/
ntfs-3g /usr/bin/lowntfs-3g
ntfs-3g /usr/bin/mkfs.ntfs
ntfs-3g /usr/bin/mkntfs
ntfs-3g /usr/bin/mount.lowntfs-3g
ntfs-3g /usr/bin/mount.ntfs
ntfs-3g /usr/bin/mount.ntfs-3g
ntfs-3g /usr/bin/ntfs-3g
ntfs-3g /usr/bin/ntfs-3g.probe
ntfs-3g /usr/bin/ntfscat
ntfs-3g /usr/bin/ntfsclone
ntfs-3g /usr/bin/ntfscluster
ntfs-3g /usr/bin/ntfscmp
ntfs-3g /usr/bin/ntfscp
ntfs-3g /usr/bin/ntfsfix
ntfs-3g /usr/bin/ntfsinfo
ntfs-3g /usr/bin/ntfslabel
ntfs-3g /usr/bin/ntfsls
ntfs-3g /usr/bin/ntfsrecover
ntfs-3g /usr/bin/ntfsresize
ntfs-3g /usr/bin/ntfssecaudit
ntfs-3g /usr/bin/ntfstruncate
ntfs-3g /usr/bin/ntfsundelete
ntfs-3g /usr/bin/ntfsusermap
ntfs-3g /usr/bin/ntfswipe
ntfs-3g /usr/include/
ntfs-3g /usr/include/ntfs-3g/
ntfs-3g /usr/include/ntfs-3g/acls.h
ntfs-3g /usr/include/ntfs-3g/attrib.h
ntfs-3g /usr/include/ntfs-3g/attrlist.h
ntfs-3g /usr/include/ntfs-3g/bitmap.h
ntfs-3g /usr/include/ntfs-3g/bootsect.h
ntfs-3g /usr/include/ntfs-3g/cache.h
ntfs-3g /usr/include/ntfs-3g/collate.h
ntfs-3g /usr/include/ntfs-3g/compat.h
ntfs-3g /usr/include/ntfs-3g/compress.h
ntfs-3g /usr/include/ntfs-3g/debug.h
ntfs-3g /usr/include/ntfs-3g/device.h
ntfs-3g /usr/include/ntfs-3g/device_io.h
ntfs-3g /usr/include/ntfs-3g/dir.h
ntfs-3g /usr/include/ntfs-3g/ea.h
ntfs-3g /usr/include/ntfs-3g/efs.h
ntfs-3g /usr/include/ntfs-3g/endians.h
ntfs-3g /usr/include/ntfs-3g/index.h
ntfs-3g /usr/include/ntfs-3g/inode.h
ntfs-3g /usr/include/ntfs-3g/ioctl.h
ntfs-3g /usr/include/ntfs-3g/layout.h
ntfs-3g /usr/include/ntfs-3g/lcnalloc.h
ntfs-3g /usr/include/ntfs-3g/logfile.h
ntfs-3g /usr/include/ntfs-3g/logging.h
ntfs-3g /usr/include/ntfs-3g/mft.h
ntfs-3g /usr/include/ntfs-3g/misc.h
ntfs-3g /usr/include/ntfs-3g/mst.h
ntfs-3g /usr/include/ntfs-3g/ntfstime.h
ntfs-3g /usr/include/ntfs-3g/object_id.h
ntfs-3g /usr/include/ntfs-3g/param.h
ntfs-3g /usr/include/ntfs-3g/plugin.h
ntfs-3g /usr/include/ntfs-3g/realpath.h
ntfs-3g /usr/include/ntfs-3g/reparse.h
ntfs-3g /usr/include/ntfs-3g/runlist.h
ntfs-3g /usr/include/ntfs-3g/security.h
ntfs-3g /usr/include/ntfs-3g/support.h
ntfs-3g /usr/include/ntfs-3g/types.h
ntfs-3g /usr/include/ntfs-3g/unistr.h
ntfs-3g /usr/include/ntfs-3g/volume.h
ntfs-3g /usr/include/ntfs-3g/xattrs.h
ntfs-3g /usr/lib/
ntfs-3g /usr/lib/libntfs-3g.so
ntfs-3g /usr/lib/libntfs-3g.so.88
ntfs-3g /usr/lib/libntfs-3g.so.88.0.0
ntfs-3g /usr/lib/ntfs-3g/
ntfs-3g /usr/lib/pkgconfig/
ntfs-3g /usr/lib/pkgconfig/libntfs-3g.pc
ntfs-3g /usr/share/
ntfs-3g /usr/share/doc/
ntfs-3g /usr/share/doc/ntfs-3g/
ntfs-3g /usr/share/doc/ntfs-3g/README
ntfs-3g /usr/share/man/
ntfs-3g /usr/share/man/man8/
ntfs-3g /usr/share/man/man8/mkfs.ntfs.8.gz
ntfs-3g /usr/share/man/man8/mkntfs.8.gz
ntfs-3g /usr/share/man/man8/mount.lowntfs-3g.8.gz
ntfs-3g /usr/share/man/man8/mount.ntfs-3g.8.gz
ntfs-3g /usr/share/man/man8/ntfs-3g.8.gz
ntfs-3g /usr/share/man/man8/ntfs-3g.probe.8.gz
ntfs-3g /usr/share/man/man8/ntfscat.8.gz
ntfs-3g /usr/share/man/man8/ntfsclone.8.gz
ntfs-3g /usr/share/man/man8/ntfscluster.8.gz
ntfs-3g /usr/share/man/man8/ntfscmp.8.gz
ntfs-3g /usr/share/man/man8/ntfscp.8.gz
ntfs-3g /usr/share/man/man8/ntfsdecrypt.8.gz
ntfs-3g /usr/share/man/man8/ntfsfallocate.8.gz
ntfs-3g /usr/share/man/man8/ntfsfix.8.gz
ntfs-3g /usr/share/man/man8/ntfsinfo.8.gz
ntfs-3g /usr/share/man/man8/ntfslabel.8.gz
ntfs-3g /usr/share/man/man8/ntfsls.8.gz
ntfs-3g /usr/share/man/man8/ntfsprogs.8.gz
ntfs-3g /usr/share/man/man8/ntfsrecover.8.gz
ntfs-3g /usr/share/man/man8/ntfsresize.8.gz
ntfs-3g /usr/share/man/man8/ntfssecaudit.8.gz
ntfs-3g /usr/share/man/man8/ntfstruncate.8.gz
ntfs-3g /usr/share/man/man8/ntfsundelete.8.gz
ntfs-3g /usr/share/man/man8/ntfsusermap.8.gz
ntfs-3g /usr/share/man/man8/ntfswipe.8.gz
PackagesStableBug ReportVery LowMedium[kodi-addons-visualization] addons don't workUnconfirmed
0%
Task Description

After installation, none of the addons is present in Kodi!

PackagesStableBug ReportVery LowLowMupen64plus acts buggyUnconfirmed
0%
Task Description

the screen moves back and forth from left to right randomly, no matter what I do, any games any adapters do not work.

I wanted to have some fun with some old games...

Has anyone used mupen64plus successfully on hyperbola 0.2? I cannot get it to work without being completely confusing for the reasons I have mentioned and also, the glaring of the screen. Which only happens with mupen64plus...

PackagesStableBug ReportVery LowMedium[cowsay] perl-text-charwidth dependency missingUnconfirmed
0%
Task Description

cowsay (cowsay-3.03-9.hyperbola1) is missing perl-text-charwidth dependency

Error message :

“Can’t locate Text/CharWidth.pm in @INC (you may need to install the Text::CharWidth module) (@INC contains: /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .) at /usr/bin/cowsay line 14.
BEGIN failed–compilation aborted at /usr/bin/cowsay line 14.”

After installing perl-text-charwidth, it works fine.

PackagesStableBug ReportVery LowMedium[nfs-utils] missing idmapd.confUnconfirmed
0%
Task Description

Hello,

When mounting an NFS share, I get a warning about missing idmpad.conf

rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
4341: * Stopping idmapd ...

Debian includes a default config file for idmap :

[General]

Verbosity = 0
Pipefs-Directory = /run/rpc_pipefs
# set your own domain here, if id differs from FQDN minus hostname
# Domain = localdomain

[Mapping]

Nobody-User = nobody
Nobody-Group = nogroup
PackagesStableFeature RequestVery LowLow[digikam]: /usr/bin/cleanup_digikamdb: line 61: kreadco...Unconfirmed
0%
Task Description

Description:

I just guess that this script cleanup_digikamdb depends on kreadconfig which is not there.

Additional info:

extra/digikam 5.5.0-2.hyperbola1 [installed]

  Digital photo management application for KDE

Steps to reproduce:

$ cleanup_digikamdb

/usr/bin/cleanup_digikamdb: line 61: kreadconfig: command not found


                  Cleanup Databases v1.1 (digiKam )                    

————————————————————————-
/usr/bin/cleanup_digikamdb: line 61: kreadconfig: command not found
This program only handles SQLite databases.
[~]

PackagesStableFeature RequestVery LowLow[iceweasel-uxp] Request browser add-on: Privacy Setting...Unconfirmed
0%
Task Description

Name: Privacy Settings
Version: 0.2.6 (compatible Firefox version 52.* to 56.*)
Author: Jeremy Schomery (j_schomery)
Licence: Mozilla Public Licence (MPL) 2.0
Source code: Github
Description: Alter Firefox’s built-in privacy settings easily with a toolbar panel.

PackagesStableFeature RequestVery LowLow[iceweasel-uxp] Request browser add-on: Classic Theme R...Unconfirmed
0%
Task Description

Name: Classic Theme Restorer
Version: 1.7.7.2 (compatible Firefox version 45.* to 56.*)
Author: Aris (Aris-t2)
Licence: Mozilla Public Licence (MPL) 2.0
Source code: Github
Description: Squared tabs, application menu, add-on bar, small button view and many more ‘old’ features for ‘Firefox 29-56’, not for Firefox 57+!

PackagesStableBug ReportVery LowHighjava cacerts file is emptyUnconfirmed
0%
Task Description

/etc/ssl/certs/java/cacerts has 0 entries, resulting in ssl handshake errors in java applications.

Package versions:
* ca-certificates 20170307-1
* ca-certificates-utils 20170307-1

PackagesStableBug ReportVery LowMediumPCManFM display different behaviorUnconfirmed
0%
Task Description

Description:

The problem is pcmanfm is not showing any partitions on the left side. It only show Home Folder, Desktop, Applications, Filesystem and the ext. hdd. If I include dbus-launch pcmanfm -d command, it show the other partitions on the left side of window but not ext. hdd. The drive/partitions are not encrypted.
I do have dbus, gvfs & ntfs-3g installed and active services.

Additional info:
* package version(s)
PCManFM 1.2.5 - using LibFM ver. 1.2.5

Steps to reproduce:
Original install from the livecd with LXDE but I may run Openbox standalone and get the same behavior with either environment. I do not have this issue running other distros.

PackagesStableBug ReportLowMediumGarbled display with xfce4-terminal (terminfo)Unconfirmed
0%
Task Description

A very nasty bug I wasn’t able to find an answer to.
I compiled stuff (buildroot) using menuconfig, the menu display was fine in xfce4-terminal (See screenshot #1)
I restarted the config a few days later with the same command :

$ make menuconfig

and this time the display was messed up (See screenshot #2)

After investigation, I noticed a directory (filled with stuff) have been created in my home folder :

.terminfo

I don’t know why. But anyway, if I delete it, then the display is ok again.
I noticed that if I use good old xterm terminal, then the display is fine even if the .terminfo directory is present. (it uses “xterm” instead of xterm-256color)

But, with xfce4-terminal (and others, I tried with gnome-terminal, sakura..), the display is messed up if the .terminfo directory is present in my home folder.

I also noticed that if I run the command in a screen session, the issue is not present.

(I open xfce4-terminal)

$ screen
$ printenv TERM
screen.xterm-256color
$ make menuconfig (or htop, or other program using ncurses)

= display ok

but with default :

(I open xfce4-terminal)

$ printenv TERM
xterm-256color
make menuconfig (or htop, or other program using ncurses)

= display messed up if .terminfo directory is present

So I have no idea why this .terminfo directory is generated. What could trigger its generation ? Is that an issue with ncurses or something else ?

Thanks for your help

PackagesStableImplementation RequestVery LowLow[materia-theme] add packageUnconfirmed
0%
Task Description

A Material-like flat theme for GTK+ 2/3, and GNOME shell, released under a GNU General Public Licence (GNU GPL) 2 and later.

PackagesStableBug ReportVery LowLowGNOME cannot lock screen while using LightDMUnconfirmed
0%
Task Description

Description:
Screen locking does not work in GNOME, either with keyboard shortcuts or from the menu, while using LightDM.

Additional info:
* According to this thread[1] this bug has been patched in Ubuntu. Please consider applying this patch.[2]

Steps to reproduce:
# pacman -S gnome lightdm lightdm-gtk-greeter
# rc-update add lightdm default
Reboot, log in to a GNOME session and attempt to lock screen.

[1] https://www.reddit.com/r/gnome/comments/9klvej/is_there_a_way_to_get_the_screen_to_lock_with/ [2] https://git.launchpad.net/~ubuntu-desktop/ubuntu/+source/gnome-shell/tree/debian/patches/ubuntu/lightdm-user-switching.patch

PackagesStableBug ReportVery LowMediumMouse curse become invisible from beginning in kde5 pla...Unconfirmed
0%
Task Description

Description:
I install plasma and xorg to my Hyperbola GNU/Linux-libre in Arch-way.
However, after reboot, everything is fine except mouse curse.

I attempt to reinstall plasma-desktop and reboot. But nothing changes.

In attachment, the mouse stop at backward, however it is invisible.

Additional info:
* package version(s)
plasma-desktop == 5.9.5-1
xorg-server == 1.19.6-2.hyperbola1
sddm == 0.14.0-2.hyperbola6

* config and/or log files etc.

Steps to reproduce:

Showing tasks 401 - 450 of 482 Page 9 of 10<<First - 6 - 7 - 8 - 9 - 10 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing